RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE

Luo Hongguang; Guo Yaojie; Li Kun; Yang Qinyuan

doi:10.13204/j.gyjz201108023

Volume 41 Issue 8

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2011 > 41(8): 96-100

SHI Xudong, ZHANG Bei, CUI Yidan. Experimental Research on Precompression Deformation Performance of Prestressed Concrete with Different Strength Grades Experiencing Given Ultralow Temperatures[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(4): 180-187. doi: 10.3724/j.gyjzG23071204

Citation:

Luo Hongguang, Guo Yaojie, Li Kun, Yang Qinyuan. RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(8): 96-100. doi: 10.13204/j.gyjz201108023

Citation:

PDF( 0 KB)

RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE

doi: 10.13204/j.gyjz201108023

1.
1. College of Civil and Architectural Engineering,China Three Gorges University,Yichang 443002,China;
2.
2. School of Civil and Architectural Engineering,Wuhan University,Wuhan 430072,China

Received Date: 2011-04-02
Publish Date: 2011-08-20

Abstract

Abstract

Based on the Direct Strength Method(DSM),the applied calculation formulas fitting for the local and distortional bucklings of cold-formed lipped channel columns under axial pressure is carried out.The minima of local,distortional and global bucklings are the buckling carrying capacity calculation results.A comparative study is made between the calculation results and experimental ones.It shows that in applicable scope the results of applied calculation formulas agree well with those of the experiments.The applied calculation formulas are simple,practical and independent of the dedicated computer program.
- cold-formed lipped channel,
- columns under axial pressure,
- direct strength method ( DSM ),
- buckling carrying capacity,
- applied calculation

FullText(HTML)

References(0)

References

Relative Articles

[1]	YAN Fengjie, DU Baoshuai, LI Bofan, ZHENG Jie, WANG Xiantie, LIANG Wanggeng. Research on Bending Performance of Connection Joints of Concrete-Filled Double-Skin Steel Tube Members with Through Flange Stiffeners[J]. INDUSTRIAL CONSTRUCTION, 2024, 54(7): 23-38. doi: 10.3724/j.gyjzG23072403
[2]	WANG Qing-he, LIU Yu-ting, XU Di-shun, ZHANG Li-jia, ZHOU Zhang-qun. Research on Flexural Properties of Reinforced Truss Spontaneous-Combustion Coal Gangue Concrete Composite Slabs[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(9): 67-73,93. doi: 10.13204/j.gyjzG22032906
[3]	DU Xinxi, LI Changzheng, YUAN Huanxin, ZHANG Fan, GAN Shixin. Research on Flexural Performances of Sinusoidal Corrugated Steel-Reinforced Concrete Beams[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(3): 158-163,131. doi: 10.13204/j.gyjzG21042009
[4]	WANG Xinling, BAI Yan, ZHU Juntao. EXPERIMENTAL STUDY ON FLEXURAL PROPERTIES OF REINFORCED CONCRETE BEAMS WITH REBAR HRB600 UNDER SERVICE CONDITIONS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(10): 20-25. doi: 10.13204/j.gyjz201904280010
[5]	ZHANG Jianwei, GUO Wang, FENG Caojie, CAO Wanlin. FLEXURAL BEHAVIOR OF STEEL FIBER REINFORCED HIGH-STRENGTH CONCRETE BEAMS WITH HRB600 STEEL BARS UNDER MONOTONIC LOADING[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(9): 49-54. doi: 10.13204/j.gyjzG19082704
[6]	CHEN Hua, CHEN Yaojia, XIE Bin, DENG Langni. STUDY OF BENDING BEHAVIOR OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH NEAR-SURFACE-MOUNTED PRESTRESSED CFRP RODS[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(9): 168-173. doi: 10.13204/j.gyjz201908210007
[7]	GE Wenjie, YU Jiamin, GAO Peiqi, SONG Wanrong, QIU Shengwei, CHEN Qiubing, JI Suidong. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF FRP REINFORCED ECC-CONCRETE COMPOSITE BEAMS STRENGTHENED WITH CARBON FIBER SHEET[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 163-168. doi: 10.13204/j.gyjz202002025
[8]	Li Binbin, Wang Sheliang. EXPERIMENTAL STUDY ON FLEXURAL PERFORMANCE OF RECYCLED AGGREGATE CONCRETE BEAMS UNDER THE INFLUENCE OF SEVERAL FACTORS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(09): 114-118.
[9]	Zhang Yi, Zhao Shenghua, Chen Xing. EXPERIMENTAL RESEARCH ON THE FLEXURAL BEHAVIOR OF RECYCLED CONCRETE T-SHAPED CROSS-SECTION SUPERPOSED BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2014, 44(05): 52-55.
[10]	Wang Dongyan, Wu Yuegang, Yang Zhenkun, Wang Mengmeng, Yuan Quan, Liao Juan, Wei Yongbin. EXPERIMENTAL STUDY ON BENDING BEHAVIOR OF C80 CONCRETE BEAMS AT EARLY AGE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 82-87. doi: 10.13204/j.gyjz201312015
[11]	Chen Zongping, Chen Yuliang, Qin Wenyue, Xue Jianyang, Qi Cheng. TEST OF FLEXURAL BEHAVIOR AND ULTIMATE CAPACITY CALCULATION OF STEEL REINFORCED RECYCLED AGGREGATE CONCRETE BEAMS[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(9): 11-16,29. doi: 10.13204/j.gyjz201309002
[12]	Xu Ming, Pang Fangteng, Chen Zhongfan. FLEXURAL BEHAVIOR OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH CFRP SHEETS BONDED WITH INORGANIC MATRIX[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(4): 156-159. doi: 10.13204/j.gyjz201304032
[13]	He Yuanye, Liu Qing, Wang Kexin. EXPERIMENTAL STUDY ON BENDING BEHAVIOR OF FRP STRENGTHENED RC BEAMS IN XINJIANG NATURAL CONDITIONS[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(3): 76-79,112. doi: 10.13204/j.gyjz201203016
[14]	Ge Wenjie, Zhang Jiwen, Dai Hang, Tu Yongming. EXPERIMENTAL STUDY ON THE FLEXURAL BEHAVIOR OF CONCRETE BEAM REINFORCED WITH HRBF400 STEEL BARS[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(6): 71-74. doi: 10.13204/j.gyjz201106015
[15]	Wu Erjun, Yan Wei. STUDY ON MAGNIFICATION COEFFICIENT OF BEAM MOMENT IN REINFORCED CONCRETE FRAME[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(12): 39-42. doi: 10.13204/j.gyjz201012011
[16]	Tu Yongming, Zhang Jiwen, Qian Yang, Chen Jie. EXPERIMENTAL STUDY ON THE FLEXURAL BEHAVIOR OF CONCRETE BEAMS PRESTRESSED WITH AFRP TENDONS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 72-76. doi: 10.13204/j.gyjz200904017
[17]	Zhao Jinjie, Zhang Qinxi, Yang Yongxin, Yang Meng, Lian Jie. EXPERIMENTAL INVESTIGATION OF FLEXURAL BEARING CAPACITY OF CONCRETE BEAMS WITH HRBF500 BARS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(3): 52-55. doi: 10.13204/j.gyjz200903016
[18]	Liu Xiao, Wang Bing, Wang Lianguang. THE THEORETIC RESEARCH ON FLEXURAL BEARING CAPACITY OF CONCRETE-FILLED RECTANGULAR STEEL TUBE WITH H-SHAPED SECTION OR CROSS STEEL SECTION[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(7): 95-97. doi: 10.13204/j.gyjz200807024
[19]	Ouyang Yu, Wang Peng, Zhang Yunchao. CALCULATION AND ANALYSIS OF FLEXURAL AND SHEAR CAPACITY OF RC BEAMS STRENGTHENED WITH BFRP SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(6): 24-27. doi: 10.13204/j.gyjz200706007
[20]	Wang Gang, Qian Jiaru, Lin Liyan. STUDY ON BENDING BEHAVIOR OF STEEL TUBE REINFORCED CONCRETE MEMBERS[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(2): 68-71. doi: 10.13204/j.gyjz200602020

Supplements(0)

Cited By

Cited by
Periodical cited type(0)
Other cited types(1)

Proportional views

Proportional views

通讯作者: 陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Get Citation

PDF

XML

Article Metrics

Article views (79) PDF downloads(72)

RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE

doi: 10.13204/j.gyjz201108023

Abstract

References

Relative Articles

Cited by

Periodical cited type(0)

Other cited types(1)

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Journal Online

Authors' Center

Links

RESEARCH ON THE APPLIED CALCULATION METHOD FOR THE BUCKLING OF COLD-FORMED LIPPED CHANNEL COLUMNS UNDER AXIAL PRESSURE

doi: 10.13204/j.gyjz201108023

Abstract

References

Relative Articles

Cited by

Periodical cited type(0)

Other cited types(1)

Proportional views

Catalog

通讯作者: 陈斌, bchen63@163.com

Article Metrics

Proportional views

Related

Journal Online

Authors' Center

Links

Export File

Citation

Format

Content