Zha Fusheng, Liu Songyu, Du Yanjun, Cui Kerui. STUDY ON THE MICROSTRUCTURE OF STABILIZED EXPANSIVE SOILS USING ELECTRICAL RESISTIVITY MEASUREMENT[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(8): 55-58,78. doi: 10.13204/j.gyjz201108015
Citation:
Zha Fusheng, Liu Songyu, Du Yanjun, Cui Kerui. STUDY ON THE MICROSTRUCTURE OF STABILIZED EXPANSIVE SOILS USING ELECTRICAL RESISTIVITY MEASUREMENT[J]. INDUSTRIAL CONSTRUCTION , 2011, 41(8): 55-58,78. doi: 10.13204/j.gyjz201108015
Zha Fusheng, Liu Songyu, Du Yanjun, Cui Kerui. STUDY ON THE MICROSTRUCTURE OF STABILIZED EXPANSIVE SOILS USING ELECTRICAL RESISTIVITY MEASUREMENT[J]. INDUSTRIAL CONSTRUCTION, 2011, 41(8): 55-58,78. doi: 10.13204/j.gyjz201108015
Citation:
Zha Fusheng, Liu Songyu, Du Yanjun, Cui Kerui. STUDY ON THE MICROSTRUCTURE OF STABILIZED EXPANSIVE SOILS USING ELECTRICAL RESISTIVITY MEASUREMENT[J]. INDUSTRIAL CONSTRUCTION , 2011, 41(8): 55-58,78. doi: 10.13204/j.gyjz201108015
STUDY ON THE MICROSTRUCTURE OF STABILIZED EXPANSIVE SOILS USING ELECTRICAL RESISTIVITY MEASUREMENT
1.
1. School of Resources and Environment Engineering,Hefei University of Technology,Hefei 230009,China;
2.
2. Institute of Geotechnical Engineering,Southeast University,Nanjing 210096,China
Received Date: 2011-01-28
Publish Date:
2011-08-20
Abstract
An electrical resistivity method was introduced into the microstructure study on stabilized expansive soils and evaluated its effectiveness.The expansive soils were stabilized with lime and flyash,the horizontal and vertical electrical resistivity were measured at the same time during curing.The electrical formation parameters,such as the average formation factor,the electrical anisotropy index and the average shape factor were then calculated and studied.The changes in microstructure of lime or flyash stabilized expansive soils during curing were analyzed.The physicochemical process in lime or flyash stabilized expansive soils was discussed.Experimental results show the effectiveness of electrical resistivity method in quantitative study on the microstructure change of the additives stabilized expansive soils during curing.
References
Relative Articles
[1] DONG Shier, YANG Bo, ZHANG Airong. Research on Ultimate Bearing Capacity of Cold-Formed Thin-Walled C-Section Steel Double-Limbed Closed Built-up Columns [J]. INDUSTRIAL CONSTRUCTION, 2022, 52(11): 175-180,174. doi: 10.13204/j.gyjzG21070506
[2] LAN Tao, DING Min, DI Shaohan, ZHENG Feihong, ZHUANG Jinzhao. Prediction of Ultimate Bearing Capacity of Single-Layer Spherical Reticulated Shell Based on TensorFlow [J]. INDUSTRIAL CONSTRUCTION, 2022, 52(4): 70-73. doi: 10.13204/j.gyjzG20060112
[3] YANG Shichun. CALCULATIONS AND EXPERIMENTAL ANALYSIS OF THE ULTIMATE BEARING CAPACITY OF ROCK-SOCKETED CAST-IN-PLACE PILES [J]. INDUSTRIAL CONSTRUCTION, 2021, 51(11): 143-148,194. doi: 10.13204/j.gyjzG20111802
[4] Li Shen, Su Mingzhou, Li Feng. THE ELASTIC LATERAL STIFFNESS AND ULTIMATE CAPACITY OF V-ECCENTRIC BRACED STEEL FRAMES [J]. INDUSTRIAL CONSTRUCTION, 2015, 45(8): 145-152. doi: 10.13204/j.gyjz201508027
[5] Wang Hui, Li Xiaoyan, Sun Qing, Xue Jianyang. EXPERIMENTAL RESEARCH ON OVERALL STABILITY BEARING CAPACITY OF HIGH STRENGTH STEEL TUBE COMPONENTS [J]. INDUSTRIAL CONSTRUCTION, 2014, 44(11): 145-149. doi: 10.13204/j.gyjz2001411029
[6] Li Yan, Zhao Junhai, Liang Wenbiao, Zhang Dongfang. STUDY ON ULTIMATE BEARING CAPACITY OF DUMBBELL SHAPED CONCRETE-FILLED STEEL TUBULAR COLUMN BASED ON TWIN SHEAR UNIFIED STRENGTH THEORY [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(5): 137-143. doi: 10.13204/j.gyjz201305029
[7] Xue Jianyang, Wang Yuncheng, Ma Hui, Liu Jinlu, Ao Xiang. EXPERIMENTAL STUDY ON LATERAL BEARING CAPACITY AND AXIAL COMPRESSION RATIO LIMIT VALUES OF STEEL REINFORCED RECYCLED AGGREGATE CONCRETE COLUMNS [J]. INDUSTRIAL CONSTRUCTION, 2013, 43(9): 30-34,45. doi: 10.13204/j.gyjz201309005
[8] Wang Xiaohan, Liu Bingkang, Lu Guo1 Chen Lihua, . EXPERIMENTAL STUDY ON SEISMIC BEHAVIOR OF RECYCLED CONCRETE MEMBERS SUBJECT TO REVERSED MOMENT,SHEAR AND TORSION [J]. INDUSTRIAL CONSTRUCTION, 2012, 42(4): 21-24,117. doi: 10.13204/j.gyjz201204005
[9] Ouyang Yu, Wang Wei, Gong Yong, Liu Neng-ke. THE ULTIMATE LOAD-BEARING CAPACITY OF TIMBER COLUMNS STRENGTHENED WITH CFRP UNDER ECCENTRIC LOAD [J]. INDUSTRIAL CONSTRUCTION, 2012, 42(10): 146-149. doi: 10.13204/j.gyjz201210030
[10] Zhao Dong, Zhang Chenghua, Huang Wei, Zhang Wenyin. ULTIMATE CAPACITY ANALYSIS OF ECO-COMPOSITE WALL [J]. INDUSTRIAL CONSTRUCTION, 2012, 42(11): 56-59. doi: 10.13204/j.gyjz201211013
[11] Zhang Xuqiao, Guo Yanlin, Jiang Ziqin. SHEAR AND BEND-CARRYING CAPACITY OF H-SHAPED MEMBERS WITH SINUSOIDAL CORRUGATED WEB WITH OPENINGS [J]. INDUSTRIAL CONSTRUCTION, 2012, 42(7): 37-44. doi: 10.13204/j.gyjz201207005
[12] Li Fengge, Zhao Gentian. STUDY ON SEISMIC BEHAVIOR OF COMPOSITE FRAME WITH SRC COLUMNS AND STEEL BEAM [J]. INDUSTRIAL CONSTRUCTION, 2010, 40(9): 111-114,110. doi: 10.13204/j.gyjz201009028
[13] Shen Baohan. DX PILE AND ITS SEVERAL PROBLEMS OF VERTICAL BEARING CAPACITIES [J]. INDUSTRIAL CONSTRUCTION, 2009, 39(8): 84-95. doi: 10.13204/j.gyjz200908022
[14] Bai Liang, Liang Xingwen. INFLUENCE OF THE CHARACTERISTIC VALUE OF STIRRUP CONTENT IN BOUNDARY ELEMENTS ON ALLOWABLE AXIAL LOAD RATIO FOR CONCRETE STRUCTURAL WALLS [J]. INDUSTRIAL CONSTRUCTION, 2009, 39(4): 44-48. doi: 10.13204/j.gyjz200904011
[15] Shen Baohan. THE DETERMINATION OF VERTICAL ULTIMATE BEARING CAPACITY OF DX PILES [J]. INDUSTRIAL CONSTRUCTION, 2008, 38(5): 13-17,27. doi: 10.13204/j.gyjz200805003
[16] Xu Haisheng, Wang Xiuxin. ANALYSIS ON ULTIMATE CAPABILITY OF REINFORCED CONCRETE FRAME IN UNIFORM FIRE [J]. INDUSTRIAL CONSTRUCTION, 2008, 38(12): 92-95. doi: 10.13204/j.gyjz200812024
[17] Yu Zongwei, Xu Kui, Li Zhen. VALIDATING ANALYSIS OF SEVERAL KINDS OF PREDICTION MODELS OF SINGLE-PILE ULTIMATE BEARING CAPACITY [J]. INDUSTRIAL CONSTRUCTION, 2007, 37(8): 64-67. doi: 10.13204/j.gyjz200708017
[18] Zhou An, . EXPERIMENT ON ULTIMATE BEARING CAPACITY AND SHEAR RIGIDITY OF STUD CONNECTORS [J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 84-87. doi: 10.13204/j.gyjz200710023
[19] Lu Hailin, Sun Chengfang, Yue Lin. EXPERIMENTAL RESEARCH ON ULTIMATE BEARING CAPACITY OF STEEL FIBER REINFORCED CONCRETE THICK PILE CAP WITH TWO PILES [J]. INDUSTRIAL CONSTRUCTION, 2004, 34(8): 38-40. doi: 10.13204/j.gyjz200408013
[20] Ye Meixin, Jiang Feng, Cheng Hao, Chen Yuji. THE STUDY OF ULTIMATE BEARING CAPACITY OF THE CONTINUOUS STEEL-CONCRETE COMPOSITE GIRDER WITH COMMON SPANS IN HIGH-SPEED RAILWAY [J]. INDUSTRIAL CONSTRUCTION, 2004, 34(2): 59-60,49. doi: 10.13204/j.gyjz200402018
Proportional views
Created with Highcharts 5.0.7 Amount of access Chart context menu Abstract Views, HTML Views, PDF Downloads Statistics Abstract Views HTML Views PDF Downloads 2024-05 2024-06 2024-07 2024-08 2024-09 2024-10 2024-11 2024-12 2025-01 2025-02 2025-03 2025-04 0 1 2 3 4 5 6
Created with Highcharts 5.0.7 Chart context menu Access Class Distribution FULLTEXT : 23.7 % FULLTEXT : 23.7 % META : 76.3 % META : 76.3 % FULLTEXT META
Created with Highcharts 5.0.7 Chart context menu Access Area Distribution 其他 : 31.6 % 其他 : 31.6 % 北京 : 2.6 % 北京 : 2.6 % 张家口 : 10.5 % 张家口 : 10.5 % 芒廷维尤 : 47.4 % 芒廷维尤 : 47.4 % 西宁 : 7.9 % 西宁 : 7.9 % 其他 北京 张家口 芒廷维尤 西宁