PARAMETER ANALYSIS OF STEEL REDUCED WEB CONNECTIONS AND STUDY ON THE FRAME ELEMENT STIFFNESS MATRIX

He Yibin; Huang Pin; Leng Qiaojuan; Xiao Alin; Guo Jian

doi:10.13204/j.gyjz201005023

Volume 40 Issue 5

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2010 > 40(5): 109-113

He Yibin, Huang Pin, Leng Qiaojuan, Xiao Alin, Guo Jian. PARAMETER ANALYSIS OF STEEL REDUCED WEB CONNECTIONS AND STUDY ON THE FRAME ELEMENT STIFFNESS MATRIX[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(5): 109-113. doi: 10.13204/j.gyjz201005023

Citation:

He Yibin, Huang Pin, Leng Qiaojuan, Xiao Alin, Guo Jian. PARAMETER ANALYSIS OF STEEL REDUCED WEB CONNECTIONS AND STUDY ON THE FRAME ELEMENT STIFFNESS MATRIX[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(5): 109-113. doi: 10.13204/j.gyjz201005023

Citation:

PDF( 0 KB)

PARAMETER ANALYSIS OF STEEL REDUCED WEB CONNECTIONS AND STUDY ON THE FRAME ELEMENT STIFFNESS MATRIX

doi: 10.13204/j.gyjz201005023

1.
1. College of Civil Engineering,Hunan University,Changsha 410082,China;
2.
2. College of Civil Engineering,Tongji University,Shanghai 200092,China

Received Date: 2009-07-03
Publish Date: 2010-05-20

Abstract

Abstract

If the dimension of rectangular openings designed suitably in practical projects，pipes and wires will not only expediently pass through the beam web to reduce the story height of a building and increase economic benefits，but also move the plastic hinge far away from the connection. In this way，it can avoid the connection failure before the members，and ensures the structural integrity and make it no collapse. The dimension of openings and the distance between the opening and the column surface are determined by the restriction requirement for beam web by flange，the shear-bearing requirements of web，the ratio of the moment at beam end to the moment at reduced section and preventing compressive plate local buckling. While with openings on web，the element stiffness matrix of frame element and the internal force and displacements of structure will be affected out of question. Therefore，it is necessary to research the element stiffness matrix of frame element. In order to decrease the amount of calculation，the beam is handled as a link element. Virtual work theory is used to derive the element stiffness matrix of frame element with openings on web，and compared with the result of finite analysis method. It shows a satisfactory agreement between calculated and finite analysis results.
- beam-column connection,
- element stiffness matrix,
- virtual work theory,
- plastic hinge,
- rectangular opening,
- finite element analysis

FullText(HTML)

References(13)

References

[2] 王燕. 钢框架塑性铰外移新型延性节点的研究与进展[J]. 青岛理工大学学报，2006，27(3) :1-6.

茹继平，杨娜，杨庆山. 翼缘削弱型钢框架梁柱节点的性能研究综述[J]. 工程力学，2004，21(1) :61-66.

[3] 李波，杨庆山，茹继平. 腹板开孔型钢框架梁柱节点抗震性能试验[J]. 哈尔滨工业大学学报，2006，38(8) :1303-1310.

[4] 李波，杨庆山，杨娜，等. 采用腹板开圆孔梁柱节点的钢框架足尺模型抗震性能试验研究[J]. 建筑结构学报，2007，28 (6) :160-166.

[5] Satish Kumar S R， Prasada Rao D V. RHS Beam-to-Column Connection with Web Opening-experimental Study and Finite Element Modeling[J]. Journal of Constructional Steel Research，2006，62(11) :739746.

[6] Prasada Rao D V， Satish Kumar S R. RHS Beam-to-Column Connection with Web Opening-Parametric Study and Design Guidelines[J]. Journal of Constructional Steel Research，doi:10. 1016/j. jcsr. 2005(11) :15.

[7] Hagen N C，Larsen P K，Aalberg A. Shear Capacity of Steel Plate Girders with Large Web Openings， Part I: Modeling and Simulations[J]. Journal of Constructional Steel Research，doi:10. 1016/j. jcsr. 2008(3) :14.

[8] Hagena N C，Larsen P K. Shear Capacity of Steel Plate Girders with Large Web Openings， Part II: Design Guidelines [J].Journal of Constructional Steel Research，doi: 10. 1016/j. jcsr.2008(3) :5.

[9] Jong Won Park，In Kyu Hwang. Experimental Investigation of Reduced Beam Section Connections by Use of Web Openings [J].Engineering Journal，2003 (2) : 77-88.

[10] 刘燕，郭成喜. 梁腹板矩形洞口削弱型节点的滞回性能[J].钢结构，2006，21(3) : 66-68.

[11] 王庆利，张淑清，张文颖，等. 空腹受弯钢构件板件设计的若干问题研究[J]. 沈阳建筑工程学院学报:自然科学版，2004，20(1) : 17-19.

[12] 杨庆山. 梁腹板开圆孔的钢框架抗震节点[J]. 中国安全科学学报，2005，15(2) :45-50.

[13] 赵熙元. 建筑钢结构设计手册[M]. 北京: 冶金工业出版社，1995: 224313.

Relative Articles

Supplements(0)

Cited By

Proportional views