EXPERIMENTAL RESEARCH ON THE MECHANICAL PROPERTIES OF THE CELLULAR LAMINATED RUBBER BEARING

Zhao Gengwen; Li Aiqun; Huang Ruixin

doi:10.13204/j.gyjz201004015

Volume 40 Issue 4

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2010 > 40(4): 65-69,41

Zhao Gengwen, Li Aiqun, Huang Ruixin. EXPERIMENTAL RESEARCH ON THE MECHANICAL PROPERTIES OF THE CELLULAR LAMINATED RUBBER BEARING[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(4): 65-69,41. doi: 10.13204/j.gyjz201004015

Citation:

Zhao Gengwen, Li Aiqun, Huang Ruixin. EXPERIMENTAL RESEARCH ON THE MECHANICAL PROPERTIES OF THE CELLULAR LAMINATED RUBBER BEARING[J]. INDUSTRIAL CONSTRUCTION, 2010, 40(4): 65-69,41. doi: 10.13204/j.gyjz201004015

Citation:

PDF( 0 KB)

EXPERIMENTAL RESEARCH ON THE MECHANICAL PROPERTIES OF THE CELLULAR LAMINATED RUBBER BEARING

doi: 10.13204/j.gyjz201004015

1.
1. School of Civil Engineering,Southeast University,Nanjing 210096,China;
2.
2. Key Laboratory of Concrete and Prestressed Concrete Structure,Ministry of Education,Nanjing 210096,China

Received Date: 2009-07-20
Publish Date: 2010-04-20

Abstract

Abstract

Based on the laminated rubber bearing,the cellular laminated rubber bearing is the rubber bearing with holes. This article focuses on the cellular rubber bearings applied to Beijing Olympic Multifunctional Studio Tower.As a new type of rubber bearing,its vertical and horizontal stiffness have been studied through the mechanical properties experiments. At the same time,the finite element model of the cellular rubber bearing has been established and its mechanical properties have been analyzed with ANSYS. From this comparison,the finite element numerical simulation results agree with the experimental data in this study. Thus,it can provide reference for the design of cellular laminated rubber bearings.
- cellular laminated rubber bearing,
- mechanical properties,
- experimental study,
- numerical simulation,
- Mooney-Rivlin model

FullText(HTML)

References(10)

References

[2] Masato Abe,M. ASCE,Junji Yoshida,et al. Multiaxial Behaviors of Laminated Rubber Bearings and Their Modeling. I:Experimental Study[J]. Journal of Structural Engineering,2004,130(8) :1119-1132.

周锡元,吴育才. 工程抗震的新发展[M]. 北京:清华大学出版社,暨南大学出版社,2002: 57-76.

[3] 李爱群,高振世. 工程结构抗震与防灾[M]. 南京:东南大学出版社,2003.

[4] 刘文光,周福霖,庄学真,等. 铅芯夹层橡胶隔震垫基本力学性能研究[J]. 地震工程与工程振动,1999,19(1) :93-99.

[5] Amin A F M S,Wiraguna S I,Bhuiyan R A,et al.Hyperelasticity Model for Finite Element Analysis of Natural and High Eamping Rubbers in Compression and Shear[J]. Journal of Engineering Mechanics,2006,132(1) :54-64.

[6] 杨晓翔. 非线性橡胶材料的有限单元法[M]. 北京:石油工业出版社,1999:70-87.

[7] 李洪升,张小朋,杨全生. 橡胶大变形力学常数测试研究[J]. 大连理工大学学报,1989,29(6) :629-634.

[8] 弗雷克利K,佩恩P K. 橡胶在工程中应用的理论与实践[M]. 杜承泽,唐宝华,罗东山,等译. 北京: 化学工业出版社,1985:19-48.

[9] 郑明军,王文静,陈政南,等. 橡胶模型力学性能常数的确定[J]. 橡胶工业,2003(8) :426-466.

[10] 江宜城,叶志雄,聂肃菲,等. 四铅芯橡胶支座显式有限元分析及试验研究[J]. 中国市政工程,2007(3) :41-44.

Relative Articles

Supplements(0)

Cited By

Proportional views