RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING

Guo Yanlin; Jiang Leixin; Zhang Enuo

doi:10.13204/j.gyjz200909006

Volume 39 Issue 9

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2009 > 39(9): 32-35

Guo Yanlin, Jiang Leixin, Zhang Enuo. RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(9): 32-35. doi: 10.13204/j.gyjz200909006

Citation:

Guo Yanlin, Jiang Leixin, Zhang Enuo. RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(9): 32-35. doi: 10.13204/j.gyjz200909006

Citation:

PDF( 0 KB)

RESEARCH ON IN-PLANE STABILITY BEARING CAPACITY OF LIPPED H-SECTION TAPERED MEMBERS UNDER COMPRESSION AND BENDING

doi: 10.13204/j.gyjz200909006

1.
Department of Civil Engineering,Tsinghua University,Beijing 100084,China

Received Date: 2009-04-20
Publish Date: 2009-09-20

Abstract

Abstract

The in-plane stability bearing capacity of lipped H-section tapered members under both compression and bending is studied,and corresponding calculation formula is also given based on the existing formula of current Chinese related technical codes.For tapered members,stability bearing capacity is seriously affected by tapering ratio,thereby a series of examples are designed to evaluate the influence of tapering ratio on stability bearing capacity of lipped H-section tapered members,meanwhile the accuracy and validity of the calculation formula proposed in the study is also confirmed.
- lipped H-section tapered members,
- compression-bending members,
- stability bearing capacity,
- tapering ratio