FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Zhao Wei; Tong Genshu

doi:10.13204/j.gyjz200806026

Volume 38 Issue 6

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2008 > 38(6): 102-105

Zhao Wei, Tong Genshu. FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 102-105. doi: 10.13204/j.gyjz200806026

Citation:

Zhao Wei, Tong Genshu. FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 102-105. doi: 10.13204/j.gyjz200806026

Zhao Wei, Tong Genshu. FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 102-105. doi: 10.13204/j.gyjz200806026

Citation:

Zhao Wei, Tong Genshu. FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(6): 102-105. doi: 10.13204/j.gyjz200806026

PDF( 0 KB)

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

doi: 10.13204/j.gyjz200806026

1.
Urban Construction College of Zhejiang Shuren University Hangzhou 310015)Tong Genshu(School of Civil Engineering,Zhejiang University Hangzhou 310027

Received Date: 2007-10-20
Publish Date: 2008-06-20

Abstract

Abstract

Based on the similarity of T-stub connections and tension zone of extended end plate connections,this paper presents a three-dimensional(3D) nonlinear analysis finite element to study numerically the stiffness and strength of the T-stub connection as part of a comprehensive research program to investigate the behavior of endplate bolted connections.The moment-rotation curves,deformation of connections,distribution of prying force and variation with external force are analyzed.And the data on finite element are fully compared with those on the test.The research shows that the finite element method can exactly simulate the behavior of T-stub connections,the usual stiffener can't act effectively and distribution and change of prying force are deeply affected by the shape and thickness of endplate stiffeners.
- T-stub connections,
- FEA,
- prying force distribution,
- prying force coefficient

FullText(HTML)

References(11)

References

童根树,赵伟. 外伸端板连接端板加劲肋设计及有限元研究[J].沈阳建筑大学学报(自然科学版),2005,(06):616-620.doi: 10.3321/j.issn:1671-2021.2005.06.004.

[2] Adey B T,Grondin G Y,Cheng J J. Cyclic Loading of End Plate Moment Connections[J].Canadian Journal of Civil Engineering,2000,(04):683-701.

[3] John C R. Evaluation of Extended End-Plate Moment Connections Under Seismic Loading[D].Virginia Polytechnic Institute and State University,Fallschurch,Virginia,1999.

[4] Sumner E A,Murray T M. End-Plate Moment Connections:Test Results and Finite Element Method Validation[A].2001.82-93.

[5] 郭兵,顾强. 多层钢框架中梁柱端板连接的强度和刚度[J].建筑结构学报,2004,(03):27-31.doi: 10.3321/j.issn:1000-6869.2004.02.005.

[6] Sumner E A. Unified Design of Extended End-Plate Moment Connections Subject to Cyclic Loading[D].Virginia Polytechnic Institute and State University,Fallschurch,Virginia,2003.

[7] 郭兵. 钢框架梁柱端板连接在循环荷载作用下的破坏机理及抗震设计对策[D].西安:西安建筑科技大学,2002.

[8] 施刚. 钢框架半刚性端板连接的静力和抗震性能研究[D].北京:清华大学,2004.

[9] 陈诚直,林群洲. 扇形焊接开孔于钢骨梁柱接头耐抗震行为之影响[J].建筑钢结构进展,2005,(05):50-56.doi: 10.3969/j.issn.1671-9379.2005.05.006.

[10] 赵伟,童根树. 加劲T形件连接节点试验研究[J].浙江大学学报(工学版),2008,(01):66-71.doi: 10.3785/j.issn.1008-973X.2008.01.013.

[11] 夏志斌,姚谏. 钢结构设计原理和设计[M].北京:中国建筑工业出版社,2003.

Relative Articles

Supplements(0)

Cited By

Proportional views