STUDY ON POLYURETHANE FOAM MATERIAL CONSTITUTIVE RELATION AND IT. S APPLICATION IN SANDWICH PANELS

Qin Peicheng; Zha Xiaoxiong; Yu Hang

doi:10.13204/j.gyjz200804020

Volume 38 Issue 4

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2008 > 38(4): 77-81

Qin Peicheng, Zha Xiaoxiong, Yu Hang. STUDY ON POLYURETHANE FOAM MATERIAL CONSTITUTIVE RELATION AND IT. S APPLICATION IN SANDWICH PANELS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(4): 77-81. doi: 10.13204/j.gyjz200804020

Citation:

Qin Peicheng, Zha Xiaoxiong, Yu Hang. STUDY ON POLYURETHANE FOAM MATERIAL CONSTITUTIVE RELATION AND IT. S APPLICATION IN SANDWICH PANELS[J]. INDUSTRIAL CONSTRUCTION, 2008, 38(4): 77-81. doi: 10.13204/j.gyjz200804020

Citation:

PDF( 0 KB)

STUDY ON POLYURETHANE FOAM MATERIAL CONSTITUTIVE RELATION AND IT. S APPLICATION IN SANDWICH PANELS

doi: 10.13204/j.gyjz200804020

1.
Civil Engineering of Shenzhen Graduate School,Harbin Institute of Technology,Shenzhen 510085

Received Date: 2007-06-03
Publish Date: 2008-04-20

Abstract

Abstract

In order to investigate the stress-strain relationship and Poisson. s ratio of the polyurethane foam material, the quas-i static tensile, compression, and shear test was conducted at room temperature with the loading speed 2mmPmin and the results show that, the material has an excellent ductility behavior on compression, but on tension and shearing, it. s obviously brittle; the Poisson. s ratio is somewhat discrete, it. s about 0. 25. In addition, based on it. s stress-strain relationship curves, a simple fitting constitutive relation is given. By the constitutive relation a FEM model is got to simulate the experiment, and the results show the validity of the constitutive relation model.
- tension,
- compression,
- shearing,
- stress,
- strain

FullText(HTML)

References(7)

References

金伟良. 工程荷载组合理论与应用. 北京: 机械工业出版社,2006: 165-187

[2] GB 50009-2001 建筑结构荷载设计规范

[3] 王振东. 混凝土及砌体结构(上册). 北京: 中国建筑工业出版社,2002: 64-67

[4] GB 50010-2002 混凝土结构设计规范

[5] 柳炳康. 荷载与结构设计方法. 武汉: 武汉理工大学出版社,2003: 125-144

[6] 过镇海. 混凝土的强度和本构关系) ) ) 原理和应用. 北京: 中国建筑工业出版社, 2004: 21-32

[7] 胡晓鹏. 结构构件抗力的调查统计与住宅结构可靠性分析: [学位论文]. 西安: 西安建筑科技大学, 2005

Relative Articles

[1]	ZHANG Jinfeng, ZHANG Tianzhong, YANG Jin, CHEN Lei, ZHANG Lu. Experimental Research on Weathering Steel Deviation Angle Towers Under Static Loads[J]. INDUSTRIAL CONSTRUCTION, 2022, 52(3): 146-149,190. doi: 10.13204/j.gyjzG20041009
[2]	LI Guoqing, MA Haichun, QIAN Jiazhong, ZHANG Qing. EXPERIMENTS AND SIMULATIONS ON FRACTURE OF ROCK WITH DIFFERENT NUMBERS OF FISSURES[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(9): 181-187. doi: 10.13204/j.gyjzG20090802
[3]	QIN Yongjun, LI Xiangyang, CUI Zhuang, WANG Bo. RESEARCH ON SHEAR PERFORMANCES OF CONCRETE DEEP BEAMS MIXED WITH DESERT SAND WITHOUT WEB REINFORCEMENT[J]. INDUSTRIAL CONSTRUCTION, 2021, 51(9): 98-105. doi: 10.13204/j.gyjzG20081505
[4]	LIU Dianzhong, LI Hongxian, YANG Kai. MECHANICAL PERFORMANCE TESTS AND NUMERICAL SIMULATIONS OF COMPOSITE CONCRETE TWO-WAY SLABS REINFORCED WITH COLD-FORMED THIN-WALL SQUARE STEEL TUBES[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(10): 170-179,198. doi: 10.13204/j.gyjzG20020408
[5]	GAO Jiangang, ZHAO Qilin, LI Fei, KE Minyong. ANALYSIS OF LONGITUDINAL CRACKING MECHANISM OF GFRP PRE-TIGHTENED TEETH CONNECTION UNDER TENSILE LOAD[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(8): 182-188. doi: 10.13204/j.gyjzG201908190001
[6]	Yang Zhong Ye Xianguo, . STUDY OF SEISMIC PERFORMANCE OF ULTRAHIGH TOUGHNESS CEMENTITIOUS COMPOSITE COUPLING BEAMS WITH SMALL SPAN-DEPTH RATIO[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(10): 79-83. doi: 10.13204/j.gyjz201510015
[7]	Li Xiaofen Liu Lixin Zhang Huipeng, . EXPERIMENTAL STUDY OF FATIGUE BEHAVIOR OF THE PRESTRESSED CONCRETE BEAMS WITH PRETENSIONED BENT-UP TENDONS[J]. INDUSTRIAL CONSTRUCTION, 2015, 45(7): 95-101. doi: 10.13204/j.gyjz201507020
[8]	Li Chunlin. STUDY OF SHIELD CONSTRUCTION INFLUENCES ON MECHANICAL BEHAVIOR OF SOIL AROUND TUNNELING SHIELD[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 93-97. doi: 10.13204/j.gyjz201312017
[9]	Wu Fahong, Chen Guiping, Ji Weibing. DESIGN OF TEMPERATURE AND SHRINK STRESS AND CONTROL MEASURE OF SUPER-LONG CONCRETE FRAME STRUCTURE[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(12): 144-148. doi: 10.13204/j.gyjz201312027
[10]	Tong Genshu, Tao Wendeng, Zhang Lei. ELASTIC BUCKLING OF SIMPLY SUPPORTED RECTANGULAR PLATES UNDER BENDING,SHEAR AND BEARING STRESSES[J]. INDUSTRIAL CONSTRUCTION, 2013, 43(4): 22-27. doi: 10.13204/j.gyjz201304005
[11]	Du Yongfeng, Wu Zhongtie, Fan Pingping. ANALYSIS OF STRESS AND DEFORMATION OF LAMINATED RUBBER BEARING CONNECTED WITH THE RC COLUMNS UNDER EARTHQUAKE[J]. INDUSTRIAL CONSTRUCTION, 2012, 42(3): 39-42,132. doi: 10.13204/j.gyjz201203007
[12]	Fan Zhiqiang, Xiao Hongbin. EXPERIMENTAL STUDY ON SHEAR CREEP CHARACTERISTICS OF NANNING UNSATURATED EXPANSIVE SOILS[J]. INDUSTRIAL CONSTRUCTION, 2009, 39(11): 71-75. doi: 10.13204/j.gyjz200911017
[13]	Fang Enquan, Li Jinshun, Zhang Leishun. ANALYSIS ON THE INTERFACE BOND PERFORMANCE OF CFRP-CONCRETE[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 66-69. doi: 10.13204/j.gyjz200707020
[14]	Meng Da, Cao Hui, . FEM ANALYSIS OF CONTINUOUS WALL BEAM WITH PORTAL UNDER VERTICAL UNIFORM LOAD[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(11): 59-61. doi: 10.13204/j.gyjz200611015
[15]	Yue Qiang, Xiao Hongtian, Li Bo. BOUNDARY ELEMENT ANALYSIS OF STRESS AND DISPLACEMENT FIELD IN LAYERED SOIL[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(12): 52-55. doi: 10.13204/j.gyjz200612015
[16]	Tu Yongming, LüZhitao. RESEARCH ON THE EXPERIMENT OF PRESTRESSED CONCRETE STRUCTURES IN CARBONATION ENVIRONMENT AND THE PREDICTION MODEL OF CARBONATION DEPTH[J]. INDUSTRIAL CONSTRUCTION, 2006, 36(1): 47-50. doi: 10.13204/j.gyjz200601015
[17]	Zhang Guojun, LüXilin. EXPERIMENTAL STUDY ON MECHANICAL BEHAVIOR OF HIGH STRENGTH CONCRETE SHORT COLUMNS WITH HIGH AXIAL LOAD RATIO[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(3): 20-22,26. doi: 10.13204/j.gyjz200503009
[18]	Zhang Yumei, Song Yupu, Zhao Yunfei, Dong Aoshuang. ELASTOPLASTIC FINITE ELEMENT ANALYSIS OF HOLLOW SHELL FOUNDATION[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(11): 60-63,73. doi: 10.13204/j.gyjz200511018
[19]	Meng Da, Hang Ying, Zhou Yunlin. FINITE ELEMENT ANALYSIS OF NO-HOLE CONTINUOUS WALL-BEAMS SUBJECTED TO VERTICAL LOADING[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(12): 48-50. doi: 10.13204/j.gyjz200412013
[20]	Tu Yongming, LüZhitao. THE EXPERIMENTAL RESEARCH ON PRESTRESSED CONCRETE STRUCTURE UNDER SALT FOG CORROSION ENVIRONMENT[J]. INDUSTRIAL CONSTRUCTION, 2004, 34(5): 1-3,10. doi: 10.13204/j.gyjz200405001