EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS

Liu Yang; Zhang Qilin

doi:10.13204/j.gyjz200710024

Volume 37 Issue 10

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2007 > 37(10): 88-92

Liu Yang, Zhang Qilin. EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 88-92. doi: 10.13204/j.gyjz200710024

Citation:

Liu Yang, Zhang Qilin. EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 88-92. doi: 10.13204/j.gyjz200710024

Liu Yang, Zhang Qilin. EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 88-92. doi: 10.13204/j.gyjz200710024

Citation:

Liu Yang, Zhang Qilin. EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(10): 88-92. doi: 10.13204/j.gyjz200710024

PDF( 0 KB)

EXPERIMENT AND FEM ANALYSIS ON THE SHEAR BEHAVIORS OF PROFILED METAL SHEETS

doi: 10.13204/j.gyjz200710024

Liu Yang¹,
Zhang Qilin²

1.
1. Guangzhou Urban Planning &Design Survey Research Institute Guangzhou 510060;
2.
2. Department of Building Engineering,Tongji University Shanghai 200092

Received Date: 2007-01-20
Publish Date: 2007-10-20

Abstract

Abstract

Test program on the shear behavior of stressed skin diaphragm using profiled sheets connected by the self-tapping screws was carried out, which are constructed according to the detailing in practical engineering. The effects ofdifferent sheeting sections and purlin distances on the shear behavior of shin diaphragm were studied by analyzing the failuremodes and shear capacities of the panel. Finite element analysis of the experimental specimen was conducted by use of theANSYS package, considering nonlinearity caused by the large deflection and slip of fasteners. The experimental data werecompared with the results acquired by finite element analysis. Itwas provedthat ANSYS can be used to analyze the stressedskin diaphragm, and that finite element analysis can provide substitute method for the repeated full scale tests.
- profiled sheet,
- skin diaphragm,
- shear behavior,
- nonlinear finite element

FullText(HTML)

References(7)

References

.ECCS. European Recommendations for the Application of Metal SheetingActing As a Diaphragm. European Convention for ConstructionalSteelwork. Brussels: 1995

.AISI. Design of Cold -Formed Steel Diaphragms(Draft). American Ironand Steel Institute, 1981

.Davies J M, Byan E R. Manual of Stressed Skin Diaphragm Design.Granada: 1982

.龙莉萍, 韦松, 崔佳. 自攻螺丝连接受力蒙皮体抗剪性能试验研究. 建筑结构学报,2004, 25(2):39-43

.乐延方, 姬广华, 柏树新. 受力蒙皮连接的抗剪性能试验研究. 南京建筑工程学院学报,1992, 21(2):50-59

.乐延方, 姬广华, 柏树新. 受力蒙皮性能试验研究. 南京建筑工程学院学报, 1992, 21(2): 60-72

.刘洋. 轻钢结构蒙皮效应的理论与试验研究: [ 博士学位论文]. 上海: 同济大学, 2006

Relative Articles

Supplements(0)

Cited By

Proportional views