STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR

Guo Jinshi; Yin Xinsheng

doi:10.13204/j.gyjz200707011

Volume 37 Issue 7

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2007 > 37(7): 33-35

Guo Jinshi, Yin Xinsheng. STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 33-35. doi: 10.13204/j.gyjz200707011

Citation:

Guo Jinshi, Yin Xinsheng. STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 33-35. doi: 10.13204/j.gyjz200707011

Guo Jinshi, Yin Xinsheng. STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 33-35. doi: 10.13204/j.gyjz200707011

Citation:

Guo Jinshi, Yin Xinsheng. STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(7): 33-35. doi: 10.13204/j.gyjz200707011

PDF( 0 KB)

STUDY ON PERFORMANCE TEST OF EDGE JOINTS FOR FLAT BEAMS OF REINFORCED CONCRETE TOP FLOOR

doi: 10.13204/j.gyjz200707011

1.
Department of Civil Engineering,Jilin Institute of Architecture and Civil Engineering Changchun 130021

Received Date: 2005-12-02
Publish Date: 2007-07-20

Abstract

Abstract

It is compared and analyzed that the failure mechanism,bearing capacity,deformation and rupture forms of edge joints through loading test with and without reinforced concrete flat beams,whose width height ratio is 3.It is also made a breakthrough at the requirements for section width limit of flat beams in Code for Seismic Design of Buildings(GB50011-2001),which provides a reference provided for design methods and engineering application of edge joints for reinforced concrete flat beams.
- reinforced concrete flat beams,
- edge joints,
- failure mechanism,
- design suggestion