DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING

Li Jianpu; Li Zhenzhong

doi:10.13204/j.gyjz200702029

Volume 37 Issue 2

Dec. 2014

Turn off MathJax

Article Contents

Article Navigation > INDUSTRIAL CONSTRUCTION > 2007 > 37(2): 112-114

Li Jianpu, Li Zhenzhong. DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 112-114. doi: 10.13204/j.gyjz200702029

Citation:

Li Jianpu, Li Zhenzhong. DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 112-114. doi: 10.13204/j.gyjz200702029

Li Jianpu, Li Zhenzhong. DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 112-114. doi: 10.13204/j.gyjz200702029

Citation:

Li Jianpu, Li Zhenzhong. DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING[J]. INDUSTRIAL CONSTRUCTION, 2007, 37(2): 112-114. doi: 10.13204/j.gyjz200702029

PDF( 0 KB)

DIFFERENT MEASURE METHODS USED TOGETHER FOR ONE HIGH-RISE BUILDING

doi: 10.13204/j.gyjz200702029

Li Jianpu¹,
Li Zhenzhong²

1.
1 Hebei Construction Co.,Ltd Shijiazhuang 050051;
2.
2 Hebei No.4 Construction Engineering Co. Shijiazhuang 050051

Received Date: 2006-08-20
Publish Date: 2007-02-20

Abstract

Abstract

When the sections of a project are not in the through going shaft, the project's rotational angle is complicated. Axes controlling method for line setting need to move station many times and measuring error will accumulate rapidly. Polar coordinates method is more convenient. Outer controlling method is used for upright control under 0.000 and inner controlling method for above 0.000, thus the axes are controlled effectively. Elevations pass layer-by-layer, outer direction joint measuring can control the building rotation. The combination of different measuring methods can make good effect during tall building measuring. And the implementing method for settlement observation is also expounded.
- techniques,