EXPERIMENTAL RESEARCH ON THE L-SHAPE CONNECTION SPECIMENS MADE OF FIBER-REINFORCED PLASTERBOARD

Jiang Xinliang; Nie Qilin; Zhang Yuelou; Gu Yan

doi:10.13204/j.gyjz200507019

Volume 35 Issue 7

Dec. 2014

Turn off MathJax

Article Contents

Abstract

References

Article Navigation > INDUSTRIAL CONSTRUCTION > 2005 > 35(7): 67-70

ZHOU Yiyi, SHU Zhan, ZHOU Changfeng, JIA LiangJiu. DESIGN AND OPTIMIZATION OF NEGATIVE POISSON'S RATIO OF ENERGY CONSUMPTION STEEL PLATE BASED ON INTELLIGENT CONSTRUCTION[J]. INDUSTRIAL CONSTRUCTION, 2020, 50(2): 137-142,157. doi: 10.13204/j.gyjz202002021

Citation:

Jiang Xinliang, Nie Qilin, Zhang Yuelou, Gu Yan. EXPERIMENTAL RESEARCH ON THE L-SHAPE CONNECTION SPECIMENS MADE OF FIBER-REINFORCED PLASTERBOARD[J]. INDUSTRIAL CONSTRUCTION, 2005, 35(7): 67-70. doi: 10.13204/j.gyjz200507019

Citation:

PDF( 0 KB)

EXPERIMENTAL RESEARCH ON THE L-SHAPE CONNECTION SPECIMENS MADE OF FIBER-REINFORCED PLASTERBOARD

doi: 10.13204/j.gyjz200507019

1.
School of Civil Engineering,Tianjin University Tianjin 300072

Received Date: 2004-12-22
Publish Date: 2005-07-20

Abstract

Abstract

It is presented the experimental processes and results of three L- shape connection specimens with two kinds of reinforcing bars under cyclic loading. Failure pattern, bearing capacity, rigidity degeneration, hysteresis curves and energy dissipation etc are studied systematically. And the seismic performance of the two kinds of specimens is also compared synthetically, which provides a basis for the aseismic design and construction of fiber- reinforced plasterboard. And the consequence of comparison to ordinary bricking- up wall bearing capacity indicates that the specimens are satisfied with operating requirements.
- rapid wall,
- fiber-reinforced plasterboard,
- joint test,
- low reversed cyclic loading