Source Journal of Chinese Scientific and Technical Papers
Included as T2 Level in the High-Quality Science and Technology Journals in the Field of Architectural Science
Core Journal of RCCSE
Included in the CAS Content Collection
Included in the JST China
Indexed in World Journal Clout Index (WJCI) Report

2024 Vol. 54, No. 5

Display Method:
Safety Monitoring Twin System for Three Major Building Super-Large Excavation Pits Based on Internet of Things Technology
CHEN Hongda, LI Xin, YU Caizhao, HE Meng, LIU Zhansheng, TONG Li
2024, 54(5): 1-8. doi: 10.3724/j.gyjzG23111319
Abstract:
With the rapid development of economy and urbanization, the scale and number of super-large excavation pit projects have surged. However, the construction of super-large underground space structure is faced with challenges such as complex underground...
Research on Lean Construction Method of Large Underground Spaces Based on BIM and Ontology
WANG Haitao, YU Caizhao, WANG Zelin, HE Meng, LIU Zhansheng, LI Lu
2024, 54(5): 9-15. doi: 10.3724/j.gyjzG23111318
Abstract:
Since the 21st century, with the rapid development of economy in our country, the utilization of urban land resources tends to be saturated. The construction and development of large underground spaces has become a significant way to improve the land...
A Digital Delivery Method for Large Underground Spaces Integrating Multi-source and Multi-dimensional Data
YU Caizhao, WANG Haitao, SONG Tianshuai, ZHENG Jiarong, LIU Zhansheng, YANG Kai, LIU Junjie
2024, 54(5): 16-24. doi: 10.3724/j.gyjzG23111320
Abstract:
With the continuous improvement of the level of informationization, the drawbacks of the traditional as-built delivery mode are becoming more and more prominent. In order to solve the problems of low efficiency of traditional as-built delivery and po...
An Intelligent Optimization Method for Large Underground Space Construction Scheme Under Low Carbon Target
SONG Tianshuai, YU Caizhao, QIN Yanlong, SHI Guoliang, LIU Zhansheng, ZHOU Enkai
2024, 54(5): 25-32. doi: 10.3724/j.gyjzG23111317
Abstract:
The construction of large underground spaces is an important field of transformation and upgrading of the construction industry. In the construction process of large underground spaces, how to obtain the optimal construction scheme and achieve the go...
A Review of Recent Advances in Containment Leakage Testing for Nuclear Power Plants
WANG Yougang, SUN Yunlun, MA Pengju, XIE Yujian, WU Zhen, HE Min, HOU Gangling
2024, 54(5): 33-42. doi: 10.13204/j.gyjzG23010608
Abstract:
The containment is the last barrier to effectively prevent the leakage of radioactive materials after an accident in a nuclear power plant, and is one of the important facilities to ensure the safe and stable operation of a nuclear power plant, so it...
An Operational Modal Parameters Identification Algorithm for Structures Based on HHT and RDT
WANG Mingjun, RAO Rui, YE Wanling, SU Zixi
2024, 54(5): 43-50. doi: 10.3724/j.gyjzG22122504
Abstract:
An algorithm, utilizing the Hilbert-Huang Transform (HHT) and the random decrement technique (RDT), was proposed to enhance the precision and automation of identifying the modal parameters of structures under operational conditions. The algorithm inv...
Research on the Detection Method of Hollowing and Missing for Building Exterior Walls Based on Visible and Infrared Image Fusion
WANG Wei, MI Qingren, XIAO Yun, YANG Xincong
2024, 54(5): 51-59. doi: 10.13204/j.gyjzG22112305
Abstract:
The detection of hollowing and missing of building exterior walls is crucial to ensure the public safety around aging buildings in cities. The traditional artificial in-situ detection methods are time- and labor-consuming with safety risks. In additi...
A Structural Surface Crack Detection Method Based on 3D Reconstruction
ZHANG Haoyu, DING Yong, LI Denghua
2024, 54(5): 60-67. doi: 10.13204/j.gyjzG22102611
Abstract:
In view of the lack of integrated expression of crack region parameters in traditional digital image processing-based crack monitoring methods, the paper proposed a structural surface crack detection method based on three-dimensional reconstruction. ...
Research on Registration Method Based on Point Cloud Data and BIM Model
ZHANG Guilin, WANG Jingde, HAN Yang, WEI Dong, XING Rong
2024, 54(5): 68-74. doi: 10.13204/j.gyjzG22091503
Abstract:
With the rapid development of the construction industry, 3D point cloud scanning technology and automatic registration of BIM model have become a hot research topic. Nowadays, the technological development of construction engineering has become an in...
Architectural Design Methods and Form Origins of Japanese Duobao Pagodas
SHAO Jizhong, LI Kunyang, MATSUMOTO Asutaka, XI Jiaoru, SONG Qize, ZHANG Xiaosi
2024, 54(5): 75-85. doi: 10.3724/j.gyjzG22083022
Abstract:
Based on unscrambling of historical records and investigation of existing remains, the evolution process of Japanese Duobao Pagodas and the architectural form and style of remains were sorted out. It was found that in the long-term development and pr...
Research on Micro-Renewal and Optimization Design of Lanzhou Railway Station Area Under Catalyst Linkage
XUE Qianming, HUANG Yuehao, SHANG Yongtao
2024, 54(5): 86-94. doi: 10.3724/j.gyjzG23060709
Abstract:
Under the general trend of stock renewal, the development bottleneck of the old city railway station area is becoming more and more prominent. How to promote the optimization and upgrading of the old city station area and revitalize the vitality of t...
Research on the Buildings and Historical Heritages Value of the Small Third Front Construction in Southern Anhui Study on the Planning and Construction of Anhui Minor Third Lineand Its Historical Value
XU Zhen, WANG Lei, PENG Jinqiang
2024, 54(5): 95-106. doi: 10.3724/j.gyjzG23091410
Abstract:
Under the background of national third line construction, Shanghai has built a total of 81 enterprises and institutions in the southern Anhui region since the 1960s, serving as the rear base of Shanghai, known as the small third front construction in...
Adaptation to Droughts and Floods: Construction Mechanisms and Contemporary Enlightenment — A Case Study of Traditional Villages in Taihang Mountains
HAN Liuwei, LIN Zurui, ZHAO Zhifeng
2024, 54(5): 107-116. doi: 10.3724/j.gyjzG22071501
Abstract:
The ancestors of the Taihang Mountains perfectly integrated water collection, storage, water use, and drainage into the construction of the village space according to the local conditions, providing core support for the agricultural civilization to c...
Research on the Weighting of Historical Building Value Assessment Indicators Considering the Influence of Subjective Scoring Differences
WANG Decai, SONG Wenhui, DING Na, MIU Junjie
2024, 54(5): 117-125. doi: 10.3724/j.gyjzG23072807
Abstract:
The weighting of indicators in the evaluation of historical building value is typically based on the relative importance of each indicator, often overlooking the influence of subjective scoring discrepancies on these weights. However, such difference...
Image Analysis of Industrial Heritage Based on Web Photo Data: A Case Study of Shanghai International Fashion Center
SUN Delong, SONG Yilin, ZHANG Shuyan, CHEN Xinrui, HAO Xin, WANG Wenli
2024, 54(5): 126-134. doi: 10.3724/j.gyjzG23090102
Abstract:
In the context of urban renewal, how the historical information and spatial culture of industrial heritage in transition are disseminated and perceived by the public needs to be emphasized. Urban imagery research based on big data has become an impor...
A Calculation Method for Direct Shear Bearing Capacity of Joints of Prestressed Precast Concrete Segmental Beams
SUN Changjun, SONG Shoutan
2024, 54(5): 135-140. doi: 10.3724/j.gyjzG21092507
Abstract:
A comparative analysis was conducted on the direct shear bearing capacity of the joints of prestressed precast concrete segmental beams. By sorting out and summarizing the research on direct shear failure of joints, using 184 direct shear test data o...
Shaking Table Tests and Numerical Simulation Study on the Centroid Eccentricity of the Center of Mass of Full-Frame-Supported High-Rise Building Structure with Thick Plate Transfer
LI Hao, WANG Dayang, ZHAO Dongzhuo, XIE Zhen
2024, 54(5): 141-149. doi: 10.3724/j.gyjzG23032007
Abstract:
The system of full-frame-supported high-rise building structure with thick plate transfer has been gradually applied in the subway superstructure property development, in order to explore the influence of changes in the eccentricity of the center of ...
Research on Seismic Performance and Damage Analysis of Reinforced ECC Composite Torsional Columns
HONG Yu, SHAO Yongjian, QI Mingtao
2024, 54(5): 150-158. doi: 10.3724/j.gyjzG23051113
Abstract:
To study the seismic performance of reinforced Engineered Cementitious Composite (ECC) columns under the combination of compression, bending, shear and torsion, quasi-static tests were conducted on 11 reinforced ECC specimens and 1 reinforcement conc...
Seismic Performance Tests of Prefabricated Concrete Frames with Embedded Composite Lightweight Aggregate Partition Wall Panels
WANG Bo, WANG Ning, WANG Jingfeng, CHEN Gang, CHENG Tao
2024, 54(5): 159-169. doi: 10.3724/j.gyjzG23052901
Abstract:
In order to study the seismic performance of a prefabricated RC (reinforced concrete) frame with embedded composite lightweight aggregate partition wall panels, quasi-static load tests were carried out on one trusses of prefabricated concrete empty f...
Experimental Research on Hysteretic Behavior of High-Strength Steel CHS T-Joints Under Axial Loads
YUAN Zhishen, YIN Siguang, YAO Yao, TANG Xiang, YUAN Jian, LUO Xuewen
2024, 54(5): 170-178. doi: 10.3724/j.gyjzG23111510
Abstract:
In order to study the hysteretic behavior of high strength steel circular hollow section (CHS) T-joints under axial loads, five high-strength steel CHS T-joints under brace axial reciprocating loads with different outer diameter ratios of brace to ch...
Research on the Seismic Performance-Based Design of Cast Steel Joints Based on the Capacity Spectrum Method
REN Jingzhe, HUANG Xijun, ZOU Qiling, XING Peilin
2024, 54(5): 179-183. doi: 10.3724/j.gyjzG22042409
Abstract:
According to the capacity spectrum method, the general method for seismic performance-based design of the cast-steel joints is put forward, in which ductility is adopted as the performance index. The method includes three steps: 1) establishing the d...
Research on Reduction Coefficients of Water Pressure on Outer Surfaces of Linings of Inclined Shaft Tunnels in Deep Embedment
LIU Yanwen, TIAN Wei, GUO Jian
2024, 54(5): 184-191. doi: 10.3724/j.gyjzG23091113
Abstract:
To study the influence of water pressure on outer surfaces of lining structure of inclined shaft tunnels in coal mines, taking an inclined shaft tunnel project across the rich water aquifer with a weak water yield property as the research object, the...
Analysis on Mechanical Characteristics of h-Type Anti-Slide Piles and Cantilevered Double-Row Anti-Slide Piles
HE Gang, ZHENG Qiqi, YANG Song, LI Dengfeng, MEI Xuefeng, LI Zezhou
2024, 54(5): 192-197. doi: 10.3724/j.gyjzG22092609
Abstract:
To explore a better anti-sliding structure between h-type anti-slide piles and cantilevered double-row anti-slide piles, the finite element software MIDAS/GTS was used and the three-dimensional finite element analysis models for h-type anti-slide pil...
Study on Thermal Shrinkage Characteristics of Improved Coarse-Grained Soil Fillers for High-Speed Railway Embankments in Temperature Cycles
ZHAO Jia, CUI Honghuan, XIE Zhishu, HU Junhui
2024, 54(5): 198-204. doi: 10.13204/j.gyjzG22091902
Abstract:
In view of the high requirement for smooth operation of high-speed railway in cold regions, two representative temperature difference environments in Hebei region were selected and the effects of filler types, temperature cycles and temperature diffe...
Study of Pullout Tests on Plastic Geogrids with Vertical Stiffener Ribs of Aluminum Angles
FANG Wei, ZHOU Peng, WANG Jiao, SHEN Hongyu
2024, 54(5): 205-211. doi: 10.3724/j.gyjzG22092708
Abstract:
To improve the interfacal strength between ordinary plastic geogrids and fillers, a new type of three-dimensional reinforcement materials —plastic geogrids with vertical ribs of aluminum angles was constructed by fixing aluminum angles as vertical st...
Modification of the Constant Coefficient Method for Horizontal Reaction of Foundation of Rigid Rock-Socketed Piles
WANG Hongqing, HUANG Yue, ZHAO Xueliang, HE Runcai, LI Yu, TIAN Weihui
2024, 54(5): 212-219. doi: 10.3724/j.gyjzG22091912
Abstract:
With the continuous development of construction scale and the offshore engineering, the loads on pile foundations have been becoming more and more complicated and the effect of lateral loads on pile foundations have been becoming more and more notabl...
Research on Tensile Softening Constitutive Relation of Macro Polypropylene Fiber Reinforced Concrete
LIU Jinhui, LIU Xiaolong, LIU Tao, DONG Wei
2024, 54(5): 220-225. doi: 10.3724/j.gyjzG23091904
Abstract:
In order to reveal strengthening and toughening mechanisms of the macro polypropylene fiber reinforced concrete, the tensile softening constitutive relation of the macro polypropylene fiber reinforced concrete was investigated. Three fiber lengths, i...
Experimental Study and Numerical Analysis of Hybrid Fiber Reinforced Self-Compacting Concrete Segments at High Temperatures
LUO Bin, WANG Huan, BAI Lianwei, REN Zhaoqing, WANG Shanshan
2024, 54(5): 226-237. doi: 10.3724/j.gyjzG23071115
Abstract:
To study the preloading on the mechanical properties of hybrid fiber self-compacting concrete segments at high-temperatures, high-temperature tests were conducted on five segments to obtain the segment furnace temperature, concrete temperature, defor...