Login
Register
E-alert
2015 Vol. 45, No. 5
Display Method:
2015, 45(5): 1-5.
doi: 10.13204/j.gyjz201505001
Abstract:
The development history of the Monastery of Santa Maria and Pickman ceramics factory was discussed． Taking the big event of World Expo92 in Seville as an advantage，the historical and cultural heritages were changed into the regional development resou...
The development history of the Monastery of Santa Maria and Pickman ceramics factory was discussed． Taking the big event of World Expo92 in Seville as an advantage，the historical and cultural heritages were changed into the regional development resou...
2015, 45(5): 6-9.
doi: 10.13204/j.gyjz201505002
Abstract:
As a wide international action，the sustainability concept of conservation and management of world heritage has been spread worldwide． Through introducing the mature protection system for conservation and management of Edinburgh World Cultural Heritag...
As a wide international action，the sustainability concept of conservation and management of world heritage has been spread worldwide． Through introducing the mature protection system for conservation and management of Edinburgh World Cultural Heritag...
2015, 45(5): 10-13.
doi: 10.13204/j.gyjz201505003
Abstract:
The value of technological history is the basic value of an industrial heritage． However，the research of technological historical value is usually neglected in the present works of China's industrial heritage conservation． It was attempted to point o...
The value of technological history is the basic value of an industrial heritage． However，the research of technological historical value is usually neglected in the present works of China's industrial heritage conservation． It was attempted to point o...
2015, 45(5): 14-18.
doi: 10.13204/j.gyjz201505004
Abstract:
Railway transporting facilities are an important part of industrial heritages． It was first analyzed the elements of railway facilities，and three transformation principles were proposed: complete protection，partial reservation and restructuring ＆ reo...
Railway transporting facilities are an important part of industrial heritages． It was first analyzed the elements of railway facilities，and three transformation principles were proposed: complete protection，partial reservation and restructuring ＆ reo...
2015, 45(5): 19-23.
doi: 10.13204/j.gyjz201505005
Abstract:
At present，the industrial heritage tourism has become the new hot spot of tourism development at home and abroad． By analyzing the current development of industrial heritage tourism and its existing problems，this paper presented a development model c...
At present，the industrial heritage tourism has become the new hot spot of tourism development at home and abroad． By analyzing the current development of industrial heritage tourism and its existing problems，this paper presented a development model c...
2015, 45(5): 24-29.
doi: 10.13204/j.gyjz201505006
Abstract:
The industrial heritages are at a balanced point of start and rise． Concept definition，case introduction and policy introduction stage were discussed in-depth by the academic circles． The reasonable use of the value identification pattern and investi...
The industrial heritages are at a balanced point of start and rise． Concept definition，case introduction and policy introduction stage were discussed in-depth by the academic circles． The reasonable use of the value identification pattern and investi...
2015, 45(5): 30-33.
doi: 10.13204/j.gyjz201505007
Abstract:
The evaluation factor were extracted to build an industrial heritage evaluation system that was applicable to Changsha，which was based on domestic and foreign industrial heritage protection laws and regulations． The analytic hierarchy process (AHP) a...
The evaluation factor were extracted to build an industrial heritage evaluation system that was applicable to Changsha，which was based on domestic and foreign industrial heritage protection laws and regulations． The analytic hierarchy process (AHP) a...
2015, 45(5): 34-37.
doi: 10.13204/j.gyjz201505008
Abstract:
How to evaluate，preserve and reuse industrial heritage is the hot issue of research． Taking Tianjin Soda Plant for example，this paper discussed the combination of the value evaluation with entities of industrial heritages． And it tried to explore the...
How to evaluate，preserve and reuse industrial heritage is the hot issue of research． Taking Tianjin Soda Plant for example，this paper discussed the combination of the value evaluation with entities of industrial heritages． And it tried to explore the...
2015, 45(5): 38-41.
doi: 10.13204/j.gyjz201505009
Abstract:
Based on analysis of industrial development situation and ceramic industrial heritage in Jingdezhen，sorting out the material and non-material elements of ceramic industrial heritage and heritage value． In the face of difficulties that many ceramic in...
Based on analysis of industrial development situation and ceramic industrial heritage in Jingdezhen，sorting out the material and non-material elements of ceramic industrial heritage and heritage value． In the face of difficulties that many ceramic in...
2015, 45(5): 42-45.
doi: 10.13204/j.gyjz201505010
Abstract:
Beginning with an introduction to the tea industry development of Meitan County of Guizhou Province， taking The Nara Document on Authenticity and Operational Guidelines for the Implementation of the World Heritage Convention as constant standards，it ...
Beginning with an introduction to the tea industry development of Meitan County of Guizhou Province， taking The Nara Document on Authenticity and Operational Guidelines for the Implementation of the World Heritage Convention as constant standards，it ...
2015, 45(5): 46-48.
doi: 10.13204/j.gyjz201505011
Abstract:
Jinan Railway Station of Jinpu Railway was built in the early 20th century，which was called Jinan Old Railway Station by Jinan citizens，and has become a history of Jinan after going through variety of sufferings in its 80 years of existence． Recently...
Jinan Railway Station of Jinpu Railway was built in the early 20th century，which was called Jinan Old Railway Station by Jinan citizens，and has become a history of Jinan after going through variety of sufferings in its 80 years of existence． Recently...
2015, 45(5): 49-54.
doi: 10.13204/j.gyjz201505012
Abstract:
An experimental research on seismic performance of a story-added three-story framework structure was carried out，and the cement-based inorganic anchoring material was used during the rebar-planting process． At the same time，an experiment on seismic p...
An experimental research on seismic performance of a story-added three-story framework structure was carried out，and the cement-based inorganic anchoring material was used during the rebar-planting process． At the same time，an experiment on seismic p...
2015, 45(5): 55-60.
doi: 10.13204/j.gyjz201505013
Abstract:
Using orthogonal test method，based on energy method and taking the damping energy dissipation of sliding base-isolated structure as the response index，it was explored the effect under the Ⅱ，Ⅲ，and Ⅳ sites conditions of the associated parameters of sli...
Using orthogonal test method，based on energy method and taking the damping energy dissipation of sliding base-isolated structure as the response index，it was explored the effect under the Ⅱ，Ⅲ，and Ⅳ sites conditions of the associated parameters of sli...
2015, 45(5): 61-64.
doi: 10.13204/j.gyjz201505014
Abstract:
A shaftless-leakage protection viscous damper was presented，its basic principle was that the deformation of oil cavity itself drove viscous flow through damping hole back and forth so that energy dissipated． Through performance test and finite elemen...
A shaftless-leakage protection viscous damper was presented，its basic principle was that the deformation of oil cavity itself drove viscous flow through damping hole back and forth so that energy dissipated． Through performance test and finite elemen...
2015, 45(5): 65-69.
doi: 10.13204/j.gyjz201505015
Abstract:
In the light of the research on the technologies of the prestressed concrete beams with pretensioned bent-up tendons，eleven groups (33) of pull-out test specimens of strands were designed，whose pull-out tests were done， and the characteristics of bon...
In the light of the research on the technologies of the prestressed concrete beams with pretensioned bent-up tendons，eleven groups (33) of pull-out test specimens of strands were designed，whose pull-out tests were done， and the characteristics of bon...
2015, 45(5): 106-110.
doi: 10.13204/j.gyjz201505023
Abstract:
Considering the technical problems such as butt joint installation and concrete compactness assurance etc in the construction of arc concrete filled steel tubular columns for Ningbo Fortune Center project，the cover mould technology，local structural c...
Considering the technical problems such as butt joint installation and concrete compactness assurance etc in the construction of arc concrete filled steel tubular columns for Ningbo Fortune Center project，the cover mould technology，local structural c...
2015, 45(5): 111-114.
doi: 10.13204/j.gyjz201505024
Abstract:
In order to investigate the distribution of residual stress in Q550GJ high strength steel welded box sections， 6 specimens of Q550GJ with various dimensions were designed and manufactured according to its mechanical properties． The partition method w...
In order to investigate the distribution of residual stress in Q550GJ high strength steel welded box sections， 6 specimens of Q550GJ with various dimensions were designed and manufactured according to its mechanical properties． The partition method w...
2015, 45(5): 115-118.
doi: 10.13204/j.gyjz201505025
Abstract:
To research flexural behavior of laminated steel beams that the upper steel beam and the lower steel beam were combined into an overall beam by a new type of shear connectors，a simply supported laminated overhanging beam with a total length of 3 m wa...
To research flexural behavior of laminated steel beams that the upper steel beam and the lower steel beam were combined into an overall beam by a new type of shear connectors，a simply supported laminated overhanging beam with a total length of 3 m wa...
2015, 45(5): 125-131.
doi: 10.13204/j.gyjz201505027
Abstract:
A new type of steel concrete composite beam with double-joist steel sections encased was introduced． Six large-scale specimens were designed and tested under four-point bending condition to study the performance indicators of normal section bending b...
A new type of steel concrete composite beam with double-joist steel sections encased was introduced． Six large-scale specimens were designed and tested under four-point bending condition to study the performance indicators of normal section bending b...
2015, 45(5): 70-75.
doi: 10.13204/j.gyjz201505016
Abstract:
Taking a practical high framed-tower with large long-diameter ratio for petro-chemical project as the object， the structure response of high framed-tower with gap limiting support under the seismic effect was analyzed with timehistory analysis，whose ...
Taking a practical high framed-tower with large long-diameter ratio for petro-chemical project as the object， the structure response of high framed-tower with gap limiting support under the seismic effect was analyzed with timehistory analysis，whose ...
2015, 45(5): 76-80.
doi: 10.13204/j.gyjz201505017
Abstract:
The expansive soil in Hefei was studied． Osmotic method and filter paper method were used to measure the relationship between gravity water content and matrix suction in different initial dry densities． The relationship between void ratio and gravity...
The expansive soil in Hefei was studied． Osmotic method and filter paper method were used to measure the relationship between gravity water content and matrix suction in different initial dry densities． The relationship between void ratio and gravity...
2015, 45(5): 81-86.
doi: 10.13204/j.gyjz201505018
Abstract:
Using the complementation of particle size of dredged silt and iron tailings ，the industrial waste iron tailings mixed with waste silt by carbide slag，cement and other curing agent improvement modified． By changing the material proportion of componen...
Using the complementation of particle size of dredged silt and iron tailings ，the industrial waste iron tailings mixed with waste silt by carbide slag，cement and other curing agent improvement modified． By changing the material proportion of componen...
2015, 45(5): 87-92.
doi: 10.13204/j.gyjz201505019
Abstract:
To investigate coalrock strength and energy evolution mechanism in failure process under biaxial loading，the mechanical parameters were got by testing coalrocks under uniaxial compression，then coalrock mesomechanical parameters were obtained through ...
To investigate coalrock strength and energy evolution mechanism in failure process under biaxial loading，the mechanical parameters were got by testing coalrocks under uniaxial compression，then coalrock mesomechanical parameters were obtained through ...
2015, 45(5): 93-96.
doi: 10.13204/j.gyjz201505020
Abstract:
Based on the reactive powder concrete specimens static load and flexural fatigue test，the ultimate bearing capacity and flexural strength and fatigue life of the specimens could be obtained． The specimens failure mode and fracture process of evolutio...
Based on the reactive powder concrete specimens static load and flexural fatigue test，the ultimate bearing capacity and flexural strength and fatigue life of the specimens could be obtained． The specimens failure mode and fracture process of evolutio...
2015, 45(5): 97-101.
doi: 10.13204/j.gyjz201505021
Abstract:
The requirements of a self compacting concrete for the coarse aggregate are different from those of an ordinary concrete，the main indicator to measure the performance of coarse aggregate is grain shape and gradation． Taking the shape index and partic...
The requirements of a self compacting concrete for the coarse aggregate are different from those of an ordinary concrete，the main indicator to measure the performance of coarse aggregate is grain shape and gradation． Taking the shape index and partic...
2015, 45(5): 102-105.
doi: 10.13204/j.gyjz201505022
Abstract:
In Northwest，groundwater and subsoil of many projects are highly corrosive，moreover，the annual temperature is largely different due to the climate． So the higher requirements are put forward to the corrosion resistance of concrete． A series of corros...
In Northwest，groundwater and subsoil of many projects are highly corrosive，moreover，the annual temperature is largely different due to the climate． So the higher requirements are put forward to the corrosion resistance of concrete． A series of corros...
2015, 45(5): 119-124.
doi: 10.13204/j.gyjz201505026
Abstract:
In order to study the influence of stiffener and the vertical load on the performance of steel plate shear wall，one specimen and two specimens with vertical stiffeners were selected to carry on pushover and cyclic loading tests． And the finite vertic...
In order to study the influence of stiffener and the vertical load on the performance of steel plate shear wall，one specimen and two specimens with vertical stiffeners were selected to carry on pushover and cyclic loading tests． And the finite vertic...
2015, 45(5): 132-137.
doi: 10.13204/j.gyjz201505028
Abstract:
Based on the test of the reinforced concrete column-steel beam ( RCS)，load-displacement hysteresis curves of three RCS composite joints with different details were analyzed． According to the test result，a uniform skeleton curve，expressed by trilinear...
Based on the test of the reinforced concrete column-steel beam ( RCS)，load-displacement hysteresis curves of three RCS composite joints with different details were analyzed． According to the test result，a uniform skeleton curve，expressed by trilinear...
2015, 45(5): 138-142.
doi: 10.13204/j.gyjz201505029
Abstract:
Eight steel reinforced concrete (SRC) short columns after high temperatures under cyclic reversed loading and three comparative specimens under monotony loading were tested to investigate their performance of bond degeneration． Test results showed th...
Eight steel reinforced concrete (SRC) short columns after high temperatures under cyclic reversed loading and three comparative specimens under monotony loading were tested to investigate their performance of bond degeneration． Test results showed th...
2015, 45(5): 143-145.
doi: 10.13204/j.gyjz201505030
Abstract:
FE models of steel box girder and deck-U rib joint were established． The boundary conditions of the deck- U rib joint FE model were interpolated from the steel box girder model using submodeling technology． The effect of pavement was considered in FE...
FE models of steel box girder and deck-U rib joint were established． The boundary conditions of the deck- U rib joint FE model were interpolated from the steel box girder model using submodeling technology． The effect of pavement was considered in FE...
2015, 45(5): 146-151.
doi: 10.13204/j.gyjz201505031
Abstract:
This paper concerns the analysis and calculation of the bearing capacity of angle members under axial force in transmission steel tower design based on Chinese Code for Design of Steel Structures (GB 500172003)，Chinese Technical Code for Design of To...
This paper concerns the analysis and calculation of the bearing capacity of angle members under axial force in transmission steel tower design based on Chinese Code for Design of Steel Structures (GB 500172003)，Chinese Technical Code for Design of To...
2015, 45(5): 152-156.
doi: 10.13204/j.gyjz201505032
Abstract:
Eleven reinforced concrete ( RC) beams with externally bonded BFＲP sheets were experimentally investigated． The effect of BFRP layers，the concrete surface artificial chiseling and anchor type on ultimate loads， stiffness and failure mode of the beams...
Eleven reinforced concrete ( RC) beams with externally bonded BFＲP sheets were experimentally investigated． The effect of BFRP layers，the concrete surface artificial chiseling and anchor type on ultimate loads， stiffness and failure mode of the beams...
2015, 45(5): 157-161.
doi: 10.13204/j.gyjz201505033
Abstract:
The method of indirectly strengthening RC frame joints with tied and lock-anchored carbon fiber reinforced polymer ( CFRP) sheets can effectively avoid debonding of CFRP and infeasibility in practice which exist in strengthening directly． Based on th...
The method of indirectly strengthening RC frame joints with tied and lock-anchored carbon fiber reinforced polymer ( CFRP) sheets can effectively avoid debonding of CFRP and infeasibility in practice which exist in strengthening directly． Based on th...
2015, 45(5): 162-165.
doi: 10.13204/j.gyjz201505034
Abstract:
Shenyang North Ｒailway Station canopy without station column was consisted of 17 steel trusses ， connected by steel purlines and the upside was paved with color plate． Due to insufficient function，the study of roof additional ceiling reconstruction p...
Shenyang North Ｒailway Station canopy without station column was consisted of 17 steel trusses ， connected by steel purlines and the upside was paved with color plate． Due to insufficient function，the study of roof additional ceiling reconstruction p...
2015, 45(5): 166-173.
doi: 10.13204/j.gyjz201505035
Abstract:
It is easy for a chicken claw ditch topography to cause the upper subgrade deformation instability and differential settlement，especially when a high rockfill embankment is built in its upper parts，the stability problem would be more prominent． At pr...
It is easy for a chicken claw ditch topography to cause the upper subgrade deformation instability and differential settlement，especially when a high rockfill embankment is built in its upper parts，the stability problem would be more prominent． At pr...
