Source Journal of Chinese Scientific and Technical Papers
Included as T2 Level in the High-Quality Science and Technology Journals in the Field of Architectural Science
Core Journal of RCCSE
Included in the CAS Content Collection
Included in the JST China
Indexed in World Journal Clout Index (WJCI) Report

2013 Vol. 43, No. 1

Display Method:
THE RESEARCH STATUS OF INDUSTRIAL HERITAGE IN CHINA
Wang Gaofeng, Sun Sheng
2013, 43(1): 1-3,60. doi: 10.13204/j.gyjz201301001
Abstract:
From the mid-20th century,the research of industrial heritage had become a subject on relict cultural,historical,economic and technological value of the Industrial Revolution period.With the development of social economy in China,nowadays,industrial ...
ANALYSIS OF EXITING BUILDINGS REUSED VALUE
Zhang Lei, Li Huimin, Yang Jiang
2013, 43(1): 4-8,54. doi: 10.13204/j.gyjz201301002
Abstract:
Based on analyzing the environmental value,historical value,economic value,social and cultural values on reusing the old buildings,a warehouse in Hangzhou City for example was presented.It was focused on reinforcement design and repair techniques.By ...
STRATEGIES OF OLD INDUSTRIAL BUILDINGS REUSE IN THE PROCESS OF CITY DEVELOPMENT
Zhang Xichen
2013, 43(1): 9-13,161. doi: 10.13204/j.gyjz201301003
Abstract:
Renovating old buildings to save resources and reducing damage to the environment has become the world consensus of government decision during the urban development.In the city replanning process,it is important to combine the way of reuse the indust...
DISSCUSSION OF PROTECTION AND REUSE OF QINGDAO INDUSTRIAL HERITAGE
Wang Runsheng, Zhu Ning, Gao Qi
2013, 43(1): 14-16. doi: 10.13204/j.gyjz201301004
Abstract:
Through introduction to the development of the protection of industry heritage,it was analyzed the status quo of protection of Qingdao industry heritage and referred to the excellent instance,finally,the following conclusions were got: for the target...
THE GROWING UP OF INDUSTRIAL BUILDING WITH THE DEVELOPMENT OF CITY:EXPLORATION OF METHOD OF REMODELING OLD INDUSTRIAL BUILDINGS
Song Shijun, Wang Sheng, Le Jialong
2013, 43(1): 17-19,31. doi: 10.13204/j.gyjz201301005
Abstract:
The remodeling of old industrial buildings has become the current important topic.It should be looked for the economic method of remodeling to realize the building new function;and the industrial building should be reused,which contained history and ...
RENOVATION AND RENEWAL OF INDUSTRIAL BUILDINGS OF XIAQIAO MINE'S MACHINERY FACTORY IN XUZHOU
Sun Yan
2013, 43(1): 20-24. doi: 10.13204/j.gyjz201301006
Abstract:
Aiming to the renovation of industrial buildings in the cities,taking the reform scheme of Xiaqiao Mine's machinery factory in Xuzhou for example,it was discussed the direction and method of reforming it,and it was also tried to add new function of t...
DISCUSSION ON STRATEGY RECONSTRUCTION AND REUSE OF DESERTED INDUSTRIAL PLANTS IN CITIES
Tian Yong, Zhang Changrui, Wang Jianjun, Ren Dengjun
2013, 43(1): 25-27,37. doi: 10.13204/j.gyjz201301007
Abstract:
Under the general tendency of current social economic transition,city reconstruction is in full swing.The voice of both dismantling constructing and effective utilization,integration transformation exists.In Germany where industrialization has been h...
RESEARCH ON THE SIMULATION TECHNOLOGY OF THE ENERGY EFFICIENCY REBUILDING FOR THE INDUSTRIAL ARCHITECTURE
Cao Yiran
2013, 43(1): 28-31. doi: 10.13204/j.gyjz201301008
Abstract:
Along with the national recognition about the impellent rebuilding of the city and the energy efficiency,the rebuilding of industrial architecture was brought forward.In the all-around period of the rebuilding,the simulation technology can be used fo...
THE STUDY ON TEMPERATURE RESPONSE FOR CONCRETE MAIN WORKSHOP IN LARGE-SCALE HEAT-ENGINE PLANT
Dai Huijuan, Bai Guoliang, Sun Peng, Zhu Jianing
2013, 43(1): 32-37. doi: 10.13204/j.gyjz201301009
Abstract:
As super-long plate concrete structure,the large-scale heat-engine plant is suffered temperature effect seriously.For this reason,it has attracted the attention of the structural designers.It was introduced temperature reduction factor to consider st...
TEST STUDY ON SIZE EFFECT OF FLEXURAL BEHAVIOR OF RC SIMPLE BEAMS
Zhou Hongyu, Li Zhenbao, Du Xiuli, Guo Erwei
2013, 43(1): 38-43,48. doi: 10.13204/j.gyjz201301010
Abstract:
Design value in codes and regulations at present stage is mainly based on test results of small size specimens,which is different from large-scale structure in practical engineering.It was collected test data of RC simple beams in different bearing s...
STUDY ON BEARING CAPACITY OF REINFORCED CONCRETE FLEXURAL MEMBER DURING CONSTRUCTION
Hu Xiaopeng, Niu Ditao, Zhang Yongli
2013, 43(1): 44-48. doi: 10.13204/j.gyjz201301011
Abstract:
Studying the bearing capaicty characteristics of in-built concrete flexural members and establishing the capacity calculation method,can provide a reliable theoretical basis to the analysis of the bearing capacity of in-built reinforced concrete stru...
EXPERIMENT OF AXIAL COMPRESSION OF REINFORCED CONCRETE SHORT SQUARE-COLUMNS STRENGTHENED WITH PRESTRESSED CFRP SHEETS
Cheng Donghui, Wang Li Yu, Yannan
2013, 43(1): 49-54. doi: 10.13204/j.gyjz201301012
Abstract:
In order to study the mechanical properties of reinforced concrete short square-columns strengthened with prestressed CFRP sheets under axial compression,3 groups of RC square-columns,total of 12,were designed according to reinforcement ratio,each gr...
RESEARCH ON THE INFLUENCE ON EXPANSIVE SOIL CHARACTERISTICS BY DIFFERENT MIXING RATES OF WEATHERED SAND
Yang Jun, Li Xinchun, Zhang Guodong, Tang Yunwei, Xie Zhigang
2013, 43(1): 55-60. doi: 10.13204/j.gyjz201301013
Abstract:
Based on defects of expansive soil modification methods,a physical improvement method with which weathered fine sand was mixed with expansive soil was proposed.Grain size distribution test,liquid limit and plastic limit test,activity index test and s...
THE CALCULATION OF THE BEARING CAPACITY OF FOUNDATION BASED ON THREE STRENGTH CRITERIA
Zhao Qi, Zhu Jianming
2013, 43(1): 61-66. doi: 10.13204/j.gyjz201301014
Abstract:
Based on the plane strength theory,the unified equation of the Mohr-Coulomb,SMP,and Lade-Duncan was derived,and the new plastic interface equation taking auount of coefficient of lateral pressure also was derived by the unified formula.The difference...
THE BEARING MECHANISM AND CALCULATION METHOD OF BEARING CAPACITY OF SCREW PILE
Yang Qi’an, Shen Baohan
2013, 43(1): 67-70. doi: 10.13204/j.gyjz201301015
Abstract:
The screw pile is a new kind of casting concrete pile which is of screw pitch on pile body.According to theoretical analysis and testing research,if the screw pitch is short,when loaded,screw thread moves with soil around it,similar to multistage exp...
EXPERIMENTAL ANALYSIS OF CFST INTERFACE BONDING PROPERTY BY CORROSION OF CHLORINE ION
Xu Kaicheng, Chen Mengcheng, He Xiaoping
2013, 43(1): 71-74,98. doi: 10.13204/j.gyjz201301016
Abstract:
In order to research the interface bonding property of concrete-filled steel tube(CFST) with the corrosion time,simulation test of CFST was done in corrosion environment,in which application of 3.5%NaCl solution to the inner surface of steel pipe.It ...
EXPERIMENTS OF CHLORIDE INGRESSION IN COMPRESIVE STRESSED CONCRETE
Yan Yongdong, Lu Chunhua, Liu Ronggui
2013, 43(1): 75-79. doi: 10.13204/j.gyjz201301017
Abstract:
Prism concrete specimens,with a W/C of 0.55,were immersed in chloride solutions under and after axial compressive stress.Chloride ions contents were obtained from the stressed specimens after 180 d exposure.Results showed that chloride ions content k...
RELATIONSHIP BETWEEN MECHANICAL PROPERTY AND CRUING AGE OF FLY ASH CONCRETE AFTER HIGH TEMPERATURE
Ma Hongxia
2013, 43(1): 80-84. doi: 10.13204/j.gyjz201301018
Abstract:
During fly ash concrete hardening process,the slow hydration of fly ash leads to low early strength of concrete,but can significantly improve the late strength of concrete(28d later),and also improve the heat resistance of concrete.In this paper,thre...
DESIGN AND FIELD MEASUREMENT ANALYSIS FOR FORMWORK OF AXIS ROTATING STRUCTURES
Che Jialing, Hu Changming, Jiang Ming
2013, 43(1): 85-89,79. doi: 10.13204/j.gyjz201301019
Abstract:
Template system is a model in which poured concrete is shaped and plays an important role.At present,the construction technique of the existing oval structure in pouring concrete is formwork worked with scaffolding.The formwork can not bear the loop ...
APPLICATION STUDY ON BENCH METHOD WITH LARGE ARCH SPRINGING OF RAPID TRANSIT RAILWAY SHALLOW BURIED TUNNEL
Li Limin
2013, 43(1): 90-93. doi: 10.13204/j.gyjz201301020
Abstract:
For the aerodynamic effect,rapid transit railway tunnel usually has two-lane section with a single hole.Especially,the technique difficulty and security risks of a shallow buried tunnel excavation is very obvious;therefore,it is very important to cho...
RESEARCH ON THE APPLICATION OF PARALLEL COMPOSITE ISOLATION TECHNOLOGY IN INTEGRAL MIGRATION OF CULTURAL RELIC BUILDING
Zhao Shiyong, Wang Tiecheng, Li Xuguang
2013, 43(1): 94-98. doi: 10.13204/j.gyjz201301021
Abstract:
As the slipping device in integral migration of a building,the friction-sliding isolation bearings together with the rubber isolation bearings which is used after the structure taking its place compose the parallel composite isolation system.By apply...
EXPERIMENTAL STUDY ON BEARING CAPACITY AND MECHANICAL BEHAVIOR OF THE CERAMSITE CONCRETE FILLED STEEL TUBULAR SHORT COLUMNS AFTER FIRE
Zhou Ming, Wang Xintang, Wang Wanzhen
2013, 43(1): 99-103,111. doi: 10.13204/j.gyjz201301022
Abstract:
The experimental investigation on post-fire mechanical behavior of ten of four sets of unprotected short columns of ceramsite concrete filled steel tubes(CCFST) was conducted,variation of remaining bearing capacity and failure form of the short colum...
ELASTIC BUCKLING PROPERTY OF STEEL PLATE SHEAR WALL WITH VERTICAL STIFFENERS
Zhao Wei, Zhou Guangen, Wu Chong
2013, 43(1): 104-107. doi: 10.13204/j.gyjz201301023
Abstract:
To study the elastic-buckling behaviors of steel plate wall with longitudinally stiffened only,the present design formulas and regulations for the design of stiffeners in steel shear walls were compared.And elastic-buckling behaviors of steel plate w...
BOND-SLIP BEHAVIOR OF SPECIMENS WITH SHORT BAR WELDING ON THE STEEL FLANGE
Zhang Jianwen, Cao Shuangyin
2013, 43(1): 108-111. doi: 10.13204/j.gyjz201301024
Abstract:
Bond-slip behavior between steel with short bar welding on the flange and lightweight aggregate concrete was explored by push-out test.Distances between short bars were 100 mm or 200 mm,which were vertically or horizontally welded on the flange.Contr...
NUMERICAL ANALYSIS OF MULTIBARREL TUBE-CONFINED CONCRETE COLUMNS ON EFFECT OF BLAST ACTION
Wu Sai, Zhao Junhai, Wei Xueying, Sun Shanshan, Zhang Dongfang
2013, 43(1): 112-117,135. doi: 10.13204/j.gyjz201301025
Abstract:
Based on the finite element analysis software ANSYS/LS-DYNA,it was established some finite element models of multibarrel tube-confined concrete columns at different cross-section form,and was analyzed the dynamic performances of them under three typi...
FORM-FINDING METHOD OF CABLE-MEMBRANE STRUCTURES CONSIDERING CABLE FORCE-FINDING FROM APPROPRIATE MOMENT
Zhao Ran, Wang Xiaoping, Wei Demin, Sun Wenbo
2013, 43(1): 118-120,130. doi: 10.13204/j.gyjz201301026
Abstract:
Form-finding analysis of actual cable-membrane projects,does not only aim to find stable shapes,but also to find suitable cable pretension distribution.Based on the nonlinear finite element method pattern theory,it was proposed a method considering c...
COMPARISON OF THE SERVICEABILITY ANALYSIS BETWEEN THE PRESENT AND OLD CODES FOR DESIGN OF CONCRETE STRUCTURES
Xu Gang, Liang Guilin, Wang Qing, Li Yunpan
2013, 43(1): 121-124,143. doi: 10.13204/j.gyjz201301027
Abstract:
By the loading test of RC beams,the theoretical values of the maximum crack widths and deflections were validated and compared based on the present and old editions of Code for Design of Concrete Structures(GB 500102010 and GB 500102002).The results ...
DAMAGE DIAGNOSIS FOR FRAME STRUCTURES BASED ON CHANGE RATE OF ELEMENTAL MODAL STRAIN ENERGY
Li Yongmei, Hu Kun, Yao Xuanyi, Zhao Jinxin
2013, 43(1): 125-130. doi: 10.13204/j.gyjz201301028
Abstract:
Generally modal displacement indices are not very efficient to identify structural damage or diagnosis for frame structures.In order to improve efficiency and reliability for damage diagnosis,change rate of elemental modal strain energy was presented...
REINFORCED DESIGN AND THE KEY CONSTRUCTION TECHNIQUE OF THE MAIN STRUCTURE OF BELT CORRIDOR IN A COAL MINE
Xie Haijian, LüHenglin, Zhang Jie, Ye Yafei
2013, 43(1): 131-135. doi: 10.13204/j.gyjz201301029
Abstract:
Materials,members and structures of the belt conveyor corridor in certain coal mine was greatly degraded and deteriorated at the severe coal mine industrial environment.Based on the reliability assessment report and the study on damage mechanisms of ...
TREATMENT MEASURES FOR A TUNNEL CAVING-IN
Chen Qing, Xia Weijun
2013, 43(1): 136-138. doi: 10.13204/j.gyjz201301030
Abstract:
This paper analyzed the reason which leads to the caving in for a deep buried tunnel in soft sand layer.The most important reason was the sandy soil lens which disturbed by the blasting operation.According to the situation,treatment measures were tak...
SEISMIC DESIGN OF BUILDING A OF MINDA PLAZA
Li Yuyu, Xiao Yan, Cao Dayan, Liu Tao
2013, 43(1): 139-143. doi: 10.13204/j.gyjz201301031
Abstract:
The building A of Minda Plaza was adopted the SRC frame and shear wall structural system.Due to the functional need,the beams were deleted from the spindle-shape outmost frames,where the columns were arranged in an inclined orientation with the princ...
OVERVIEW OF THE VARIETY OF DIAPHRAGM WALL FOUNDATION DEVELOPED IN JAPAN IN RECENT YEARS
Wu Jiujiang, Cheng Qiangong, Wen Hua
2013, 43(1): 144-149,70. doi: 10.13204/j.gyjz201301032
Abstract:
Since the diaphragm wall technique was brought to Japan in the 1960s,the diaphragm wall has been well developed and a series of breakthroughs have been made in materials,joints,machine and applications.By collecting and summarizing a great deal of Ja...
INTEGRATIVE SYMBIOSIS OF TAIWAN REGIONAL SPACE CONSTRUCTION
Xu Yongtie, Li Guiwen
2013, 43(1): 150-152,159. doi: 10.13204/j.gyjz201301033
Abstract:
It was reviewed the significance of Ilan Houses,and also expounded the connotation of the concept of integration symbiosis.It was analyzed two symbiotic modes of Ilan Houses,i.e the natural objects integrative symbiosis and endemic integrative symbio...
ELEMENTARY RESEARCH ON DEFENSE OF MANOR HOUSE OF SHANDONG TRADITIONAL DWELLINGS
Wang Shaoling, Sui Jieli
2013, 43(1): 153-155. doi: 10.13204/j.gyjz201301034
Abstract:
It was carried out an elementary research on defense of Manor house of Shandong traditional dwellings in this paper,in order to gain the experience of our previous generations on how to select efficient methods to defense their wealth suit to local c...
THE RENOVATION OF QINGDAO SMALL HARBOR
Sun Jian, Zhao Lin
2013, 43(1): 156-159. doi: 10.13204/j.gyjz201301035
Abstract:
The site environment resources can be fully exploited and integrated,so as to get an urban complex with various functions by developing simultaneously the residence and touristry,as well as laying equal stress on entertainment and busimess in a small...