Login
Register
E-alert
2009 Vol. 39, No. 3
Display Method:
2009, 39(3): 1-3.
doi: 10.13204/j.gyjz200903001
Abstract:
On the basis of researching the planning and construction of a high??tech industrial park in BDA in recent years, summarized that the new features of a modern high-tech industrial park planning, and is explored the developing trend of its planning an...
On the basis of researching the planning and construction of a high??tech industrial park in BDA in recent years, summarized that the new features of a modern high-tech industrial park planning, and is explored the developing trend of its planning an...
2009, 39(3): 4-8.
doi: 10.13204/j.gyjz200903002
Abstract:
A suitable planning for an enterprise industrial park is important, which may influence the products and future development of the enlerprise. By studying some design projects of industrial park, it is summarised that four design principles, includin...
A suitable planning for an enterprise industrial park is important, which may influence the products and future development of the enlerprise. By studying some design projects of industrial park, it is summarised that four design principles, includin...
2009, 39(3): 9-10,68.
doi: 10.13204/j.gyjz200903003
Abstract:
Suzhou Industrial Park is called ?? the industrial park, but it doesn't look like a usual industrial park. When entering the park, people sincerely issue the feeling of not being the garden landscape, yet better than it emotion. Every corner is fille...
Suzhou Industrial Park is called ?? the industrial park, but it doesn't look like a usual industrial park. When entering the park, people sincerely issue the feeling of not being the garden landscape, yet better than it emotion. Every corner is fille...
2009, 39(3): 11-14,89.
doi: 10.13204/j.gyjz200903004
Abstract:
Facing the tremendous pressure of resources and environment, only by insisting on people-oriented and following the way of industrial development in the tape of resources conservation and environment-friendly in creation of the Chinese industrial bui...
Facing the tremendous pressure of resources and environment, only by insisting on people-oriented and following the way of industrial development in the tape of resources conservation and environment-friendly in creation of the Chinese industrial bui...
2009, 39(3): 15-17.
doi: 10.13204/j.gyjz200903005
Abstract:
The monumentality is the permanent aim of the architectural art. Through the studying of the monumentality of the industrial architecture, it is attempted to clarify that only the monumentality based on the history and the culture makes sense.
The monumentality is the permanent aim of the architectural art. Through the studying of the monumentality of the industrial architecture, it is attempted to clarify that only the monumentality based on the history and the culture makes sense.
2009, 39(3): 18-20.
doi: 10.13204/j.gyjz200903006
Abstract:
In a new ear, in addition to taking account of the functional practicality in the design of industrial architectures, these architectures should also be endowed with regional, cultural and epochal characters using a design conception different from t...
In a new ear, in addition to taking account of the functional practicality in the design of industrial architectures, these architectures should also be endowed with regional, cultural and epochal characters using a design conception different from t...
2009, 39(3): 21-22.
doi: 10.13204/j.gyjz200903007
Abstract:
Industrial revolution bred the original industrial buildings, then industrial buildings the progress in industry and the development of the great modern architecture, in which concern and improrement were gradually given to humensism, yet attention w...
Industrial revolution bred the original industrial buildings, then industrial buildings the progress in industry and the development of the great modern architecture, in which concern and improrement were gradually given to humensism, yet attention w...
2009, 39(3): 23-25.
doi: 10.13204/j.gyjz200903008
Abstract:
It was studied particularly the inner public space of an office building, which was used for the sharing and communication. Firstly, it was expounded the importence of the inner public space. Secondly, analysed the design technique of archi structure...
It was studied particularly the inner public space of an office building, which was used for the sharing and communication. Firstly, it was expounded the importence of the inner public space. Secondly, analysed the design technique of archi structure...
2009, 39(3): 26-28.
doi: 10.13204/j.gyjz200903009
Abstract:
Aucording to the current conditions of the industrial architectures of old industrial bases in the northeast of China, the strategies of renovation are put forward: building the large indoor public space, the renovation strategies of the industrial a...
Aucording to the current conditions of the industrial architectures of old industrial bases in the northeast of China, the strategies of renovation are put forward: building the large indoor public space, the renovation strategies of the industrial a...
2009, 39(3): 29-31.
doi: 10.13204/j.gyjz200903010
Abstract:
In order to form a reformed space for the old industrial factory building better, and through the application in the space design of this artistic conceptleave blank, it is proposed that it should be kept the space information of bearing the weight o...
In order to form a reformed space for the old industrial factory building better, and through the application in the space design of this artistic conceptleave blank, it is proposed that it should be kept the space information of bearing the weight o...
2009, 39(3): 32-35.
doi: 10.13204/j.gyjz200903011
Abstract:
Based on the test data, the function of stirrup in SRC joints and the feasibility of SRC joints without stirrup are discussed, also the hysteretic behavior and capacity of bearing loads of non-stirrup SRC joints with thickened web are analyzed. It is...
Based on the test data, the function of stirrup in SRC joints and the feasibility of SRC joints without stirrup are discussed, also the hysteretic behavior and capacity of bearing loads of non-stirrup SRC joints with thickened web are analyzed. It is...
2009, 39(3): 36-38.
doi: 10.13204/j.gyjz200903012
Abstract:
Based on the viscoelastic stochastic FEM, using FEM in space and scatter method in time, it was set up the plane finite element model of response analysis of concrete frame structures, in which a linear three-parameter viscoelastic model was adopted ...
Based on the viscoelastic stochastic FEM, using FEM in space and scatter method in time, it was set up the plane finite element model of response analysis of concrete frame structures, in which a linear three-parameter viscoelastic model was adopted ...
2009, 39(3): 39-42.
doi: 10.13204/j.gyjz200903013
Abstract:
Air-cooled condenser structure system has a wind-bread wall above platform. Whose behavior belongs to an enclosure the of structure, and can vibrate with the wind together with structure. It is different from the enclosures specified by codes, theref...
Air-cooled condenser structure system has a wind-bread wall above platform. Whose behavior belongs to an enclosure the of structure, and can vibrate with the wind together with structure. It is different from the enclosures specified by codes, theref...
2009, 39(3): 43-47.
doi: 10.13204/j.gyjz200903014
Abstract:
Under the support structure system of air cooled condenser there are large-diameter group columns, the proposed wind parameters in present load code can't be used directly in the wind resistance design of this kind of structure. A rigid model with 1:...
Under the support structure system of air cooled condenser there are large-diameter group columns, the proposed wind parameters in present load code can't be used directly in the wind resistance design of this kind of structure. A rigid model with 1:...
2009, 39(3): 48-51.
doi: 10.13204/j.gyjz200903015
Abstract:
In order to study the shear performance of steel reinforced lightweight aggregate concrete beams, fifteen steel reinforced lightweight aggregate concrete beams and two steel reinforced normal density concrete beams were tested. The results of test ha...
In order to study the shear performance of steel reinforced lightweight aggregate concrete beams, fifteen steel reinforced lightweight aggregate concrete beams and two steel reinforced normal density concrete beams were tested. The results of test ha...
2009, 39(3): 52-55.
doi: 10.13204/j.gyjz200903016
Abstract:
Seven concrete beams with fine grain HRBF500 bars are designed and tested. By changing the thickness of protective-covering, longitudinal reinforcement ratio and the concrete strength, etc, the bearing capacity of the concrete beams is analyzed. The ...
Seven concrete beams with fine grain HRBF500 bars are designed and tested. By changing the thickness of protective-covering, longitudinal reinforcement ratio and the concrete strength, etc, the bearing capacity of the concrete beams is analyzed. The ...
2009, 39(3): 56-59.
doi: 10.13204/j.gyjz200903017
Abstract:
In order to study the shear performance of steel reinforced lightweight aggregate concrete beams, fifteen steel reinforced lightweight aggregate concrete beams and two steel reinforced normal density concrete beams were tested. The results of test ha...
In order to study the shear performance of steel reinforced lightweight aggregate concrete beams, fifteen steel reinforced lightweight aggregate concrete beams and two steel reinforced normal density concrete beams were tested. The results of test ha...
2009, 39(3): 60-63,38.
doi: 10.13204/j.gyjz200903018
Abstract:
The microbiology is introduced in foundation treatment.Several carbonate-mineralization microbes and polysaccharides viscose microbes are screened and isolated, and microbes ATCC6453 , No.3 and No.5 are used in silt modification.Engineering propertie...
The microbiology is introduced in foundation treatment.Several carbonate-mineralization microbes and polysaccharides viscose microbes are screened and isolated, and microbes ATCC6453 , No.3 and No.5 are used in silt modification.Engineering propertie...
2009, 39(3): 64-68.
doi: 10.13204/j.gyjz200903019
Abstract:
Compared with others, the soft soil in Lianyungang contains high salinity, and the most ions are Cl-, SO42-and Mg2+. If the cement deep mixing method is to improve the soft soil foundation, these ions will generate the bad influence on the strength o...
Compared with others, the soft soil in Lianyungang contains high salinity, and the most ions are Cl-, SO42-and Mg2+. If the cement deep mixing method is to improve the soft soil foundation, these ions will generate the bad influence on the strength o...
2009, 39(3): 69-72.
doi: 10.13204/j.gyjz200903020
Abstract:
It is introduced that the contrast satic load test of PC pipe pile with tooth pitch with the one of regular smooth surface pipe pile on two sites in Kunming, as well as the unique technical capability of a multi-usage drainage pipe pilewith tooth pit...
It is introduced that the contrast satic load test of PC pipe pile with tooth pitch with the one of regular smooth surface pipe pile on two sites in Kunming, as well as the unique technical capability of a multi-usage drainage pipe pilewith tooth pit...
2009, 39(3): 73-76,122.
doi: 10.13204/j.gyjz200903021
Abstract:
Soft ground zone distribute extensively in China, due to being limited by the conditions, a large number of highways must be constructed on the soft ground. Because of the negative characters of the soft soil, such as rich watercontent, high compress...
Soft ground zone distribute extensively in China, due to being limited by the conditions, a large number of highways must be constructed on the soft ground. Because of the negative characters of the soft soil, such as rich watercontent, high compress...
2009, 39(3): 77-80.
doi: 10.13204/j.gyjz200903022
Abstract:
The chloride ions'concentrations in ex isting concrete in tidal estuary environment of the Qiantang River are measured, the relation between erosion depths and concentrations of chloride ions in concrete is analyzed. Based on the samples, the porosit...
The chloride ions'concentrations in ex isting concrete in tidal estuary environment of the Qiantang River are measured, the relation between erosion depths and concentrations of chloride ions in concrete is analyzed. Based on the samples, the porosit...
2009, 39(3): 81-85.
doi: 10.13204/j.gyjz200903023
Abstract:
It is carried out a quality assessment on lightweight aggregate of the stacked self combustion coal gangue in GaodeMine of Fuxin in Liaoning according to the national standards. On the basis of satisfying the demands of national criterion of lightwei...
It is carried out a quality assessment on lightweight aggregate of the stacked self combustion coal gangue in GaodeMine of Fuxin in Liaoning according to the national standards. On the basis of satisfying the demands of national criterion of lightwei...
2009, 39(3): 86-89.
doi: 10.13204/j.gyjz200903024
Abstract:
Pumice lightweight aggregate concrete (LWAC) of LC30, LC35 is prepared with the method of mixing polypropylene fiber, superplasticizer, air?? entraining agent and mineral admixtures. Comparing frost resistance durability of LWAC in salt solution ( 5%...
Pumice lightweight aggregate concrete (LWAC) of LC30, LC35 is prepared with the method of mixing polypropylene fiber, superplasticizer, air?? entraining agent and mineral admixtures. Comparing frost resistance durability of LWAC in salt solution ( 5%...
2009, 39(3): 90-95.
doi: 10.13204/j.gyjz200903025
Abstract:
A programmable process machine with integrated positive-negative arcs, profiled and bent arc is developed, which takes the lead in the world in order to meet the needs of T2 terminal building for Pudong Airport in Shanghai. This machine can produce 1...
A programmable process machine with integrated positive-negative arcs, profiled and bent arc is developed, which takes the lead in the world in order to meet the needs of T2 terminal building for Pudong Airport in Shanghai. This machine can produce 1...
2009, 39(3): 96-102.
doi: 10.13204/j.gyjz200903026
Abstract:
The structural health monitoring (SHM) with the characteristic of multidisciplinary is a powerful tool to support the operational safety and appropriate maintenance for civil engineering infrastructures. The recent advances in research on varieties o...
The structural health monitoring (SHM) with the characteristic of multidisciplinary is a powerful tool to support the operational safety and appropriate maintenance for civil engineering infrastructures. The recent advances in research on varieties o...
2009, 39(3): 103-106.
doi: 10.13204/j.gyjz200903027
Abstract:
With the application of lightweight enclosure materials in the steel structure workshops, the solid??web type portal frame is used in metallurgical workshop, instead of the traditional latticed structure, but the current design method only bases on t...
With the application of lightweight enclosure materials in the steel structure workshops, the solid??web type portal frame is used in metallurgical workshop, instead of the traditional latticed structure, but the current design method only bases on t...
2009, 39(3): 107-111.
doi: 10.13204/j.gyjz200903028
Abstract:
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS. In order to investigate the behavior of two-side connected SPSW, a simplified...
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS. In order to investigate the behavior of two-side connected SPSW, a simplified...
2009, 39(3): 112-115,85.
doi: 10.13204/j.gyjz200903029
Abstract:
nonlinear finite element analysis of the steel frame with top- seat angle and double web-angles semi-rigid connection is carried out with ANSYS finite element software. In the procedure of the finite element analysis, connective, geometrical and mate...
nonlinear finite element analysis of the steel frame with top- seat angle and double web-angles semi-rigid connection is carried out with ANSYS finite element software. In the procedure of the finite element analysis, connective, geometrical and mate...
2009, 39(3): 116-118,35.
doi: 10.13204/j.gyjz200903030
Abstract:
The main parameters varied in the study are the slenderness ratio and eccentricity of load.Four concrete-filled double skin steel tubular(CFDSST) columns under eccentric loads and two columns under axial compression are studied. Based on the analysis...
The main parameters varied in the study are the slenderness ratio and eccentricity of load.Four concrete-filled double skin steel tubular(CFDSST) columns under eccentric loads and two columns under axial compression are studied. Based on the analysis...
2009, 39(3): 119-122.
doi: 10.13204/j.gyjz200903031
Abstract:
It is introduced a method of using grout to replace low strength concrete of partial section of frame beams-column and strengthening beam-column joints of frame structure with carbon fiber. Plan and technical measures of transfering load together by ...
It is introduced a method of using grout to replace low strength concrete of partial section of frame beams-column and strengthening beam-column joints of frame structure with carbon fiber. Plan and technical measures of transfering load together by ...
2009, 39(3): 123-125.
doi: 10.13204/j.gyjz200903032
Abstract:
Water efficiency is one of the important criteria in green building initiative. In rural area where sewer lines have not yet reached, the innovative design of on??site stormwater management systems becomes a critical component for green building accr...
Water efficiency is one of the important criteria in green building initiative. In rural area where sewer lines have not yet reached, the innovative design of on??site stormwater management systems becomes a critical component for green building accr...
