超高装配式混凝土塔筒预应力索张拉方法研究

甘国荣; 罗韬; 朱元; 李居泽

doi:10.13204/j.gyjzG22082909

超高装配式混凝土塔筒预应力索张拉方法研究

doi: 10.13204/j.gyjzG22082909

1. 广西科技师范学院, 广西来宾 546199;
2. 柳州欧维姆机械股份有限公司, 广西柳州 545005

基金项目:

广西科技师范学院高层次人才项目(GXKS2021GKY001)。

广西科技计划项目(桂科AD22080060)

详细信息

作者简介:
甘国荣,男,1974年出生,正高级工程师。电子信箱:ggring@163.com

计量
- 文章访问数: 203
- HTML全文浏览量: 18
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2022-08-29

Study on the Prestressed Cable Tensioning Method of Super-High Prefabricated Concrete Wind Tower

1. Guangxi Science & Technology Normal University, Laibing 546199, China;
2. Liuzhou OVM Machinery Co., Ltd., Liuzhou 545005, China

摘要

摘要: 陆上风电超高装配式混凝土塔筒采用中空基础,与后张预应力梁式混凝土结构的受力特点不同,针对此特点提出一种分阶段同步对称张拉的施工方法,同时利用有限元分析软件对不同张拉方案进行数值模拟,通过比较各张拉阶段中索力的变动情况和结构的应力响应,对比塔筒结构最大拉应力值及其应力分布的均匀性,对各方案进行综合评价和筛选,确定较合理的张拉方法以指导现场施工,以促进这一种新型的风电基础及类似结构的推广应用。
- 陆上风电 /
- 预应力 /
- 张拉 /
- 中空基础 /
- 结构应力
Abstract: The hollow foundation is applied to the super-height prefabricated concrete tower of onshore wind power, whose stress characteristics are different from post-tensioned prestressed concrete beam structure. In this paper, a tensioning method of two symmetrical cable by stressed synchronously is proposed. At the same time, the finite element analysis software is used to simulate the different tension schemes by comparing the change of cable force and the stress response of the structure in each tension stage, and compare the maximum tensile stress value of the tower structure and the uniformity of the stress distribution. Comprehensive evaluation has carried out on each scheme to determine the a more reasonable tensioning method to guide the site construction, so as to promote the widespread application of this new type of foundation on wind power and other similar structures in future.
- onshore wind power /
- prestressed /
- tensioning /
- hollow foundation /
- structural stress

HTML全文

参考文献(12)

[1]	甘国荣,苏韩,韦耀淋.风电混凝土塔筒体外预应力锚固体系的研究及应用[J].风能,2018(8):92-96.
[2]	LI Z Y,CHEN H B,XU B, et al. Hybrid wind turbine towers optimization with a parallel updated particle swarm algorithm[J]. Applied Sciences,2021,11(18):8683-8703.
[3]	XU X Y,LIANG J C,XU W J, et al. Reinforced concrete wind turbine towers: damage mode and model testing[J]. Sustainability,2022,14(8):4410-4423.
[4]	谢寒. 钢筋混凝土环形截面构件受弯承载力与截面分析[D].大连:大连理工大学,2020.
[5]	王长军,李鹤飞,胡邵凯,等.预应力钢-混凝土超高风电塔架数值模型及计算分析[J].建筑结构,2019,49(增刊1):955-958.
[6]	杜静,杨瑞伟,李东坡,等.MW级风电机组钢筋混凝土塔筒稳定性分析[J].太阳能学报,2021,42(3):9-14.
[7]	俞黎萍,刘晓峰.预应力混凝土风电机组塔架静力分析研究[J].风能,2015(1):76-80.
[8]	余智,张凤亮,熊海贝.基于线性累计损伤理论的预应力混凝土风电塔架疲劳可靠性及剩余寿命研究[J].武汉大学学报(工学版),2016,49(5):756-762.
[9]	宋欢,丛欧,刘金虎,等.预制混凝土塔筒竖缝拼接节点受力性能研究[J].建筑结构,2018,48(增刊2):679-683.
[10]	许云龙. 陆上装配式风机基础受力特性及结构优化研究[D].天津:天津大学,2019.
[11]	丁红岩,赵斌,张浦阳.复合筒型基础过渡段预应力张拉方案优化研究[J].太阳能学报,2021,42(7):416-423.
[12]	张志. 复合筒型基础预应力混凝土过渡段传力特征研究[D].天津:天津大学,2017.