基于可靠度的简支梁体外预应力加固设计与优化方法

马士宾; 刘月钊; 汲港升; 徐梓菲; 刘子龙

doi:10.13204/j.gyjzG22052104

基于可靠度的简支梁体外预应力加固设计与优化方法

doi: 10.13204/j.gyjzG22052104

河北工业大学土木与交通学院, 天津 300401

基金项目:

国家自然科学基金项目（51978236）；天津市交通运输科技发展项目（2022-01）。

详细信息

作者简介:
马士宾,男,1973年出生,博士,教授。

通讯作者:
刘月钊,liuyuezhaozhao@163.com。

计量
- 文章访问数: 63
- HTML全文浏览量: 14
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2022-05-21
- 网络出版日期: 2023-03-22

Reliability-Based Design and Optimization Method for External Prestressing Reinforcement of Simply-Supported Beams

School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China

摘要

摘要: 为了更加科学合理地进行体外预应力加固RC简支T梁设计优化，充分考虑了体外预应力布筋过程中几何设计值的不确定性和变异性，提出了一种基于目标可靠度的体外预应力加固设计优化方法。利用有限元分析软件，基于六西格玛理论实现体外预应力加固后梁体结构可靠度的计算，采用响应面法分析各随机设计变量（钢束等效直径、钢束夹角、钢束圆角半径、钢束折线长度、钢绞线抗拉强度设计值）对体外预应力加固后简支T梁可靠度的影响规律。结果表明：体外预应力加固后，简支T梁的可靠性对体外预应力钢束等效直径的敏感程度最高。考虑在役混凝土桥梁一级安全等级目标可靠指标，给出了体外预应加固各随机变量的设计建议值，并以现场加固桥梁工程为例验证，通过2次成桥静载试验，发现跨中挠度及应变都得到了较好的控制，最小校验系数分别为0.72和0.73。
- 简支T梁 /
- 桥梁加固 /
- 体外预应力 /
- 目标可靠度 /
- 设计优化
Abstract: In order to scientifically and reasonably study the design optimization of RC simply-supported T-beams with external prestressing reinforcement, a design optimization method for external prestressing reinforcement based on the target reliability was proposed, which fully considered the uncertainty and variability of the geometric design values during the external prestressing deployment. In addition, finite element analysis software was used to calculate the structural reliability of the beams with external prestressing reinforcement based on the six sigma theory, and a response surface method was adopted to analyze the influence of random design variables (equivalent diameter of steel tendon, included angle of steel tendon, fillet radius of steel tendon, bend length of steel tendon, and tensile strength design value of steel strand) on the reliability of the simply-supported T-beams with external prestressing reinforcement. The results show that the reliability of the simply-supported T-beams with external prestressing reinforcement is highly related to the equivalent diameter of the steel tendon with external prestressing reinforcement. In addition, recommended design values for random variables with external prestressing reinforcement were given, which took into account the target reliability indicators for the first level of safety of concrete bridges in use and were verified by an on-site bridge reinforcement project. Furthermore, the span deflection and strain were well controlled in two static load tests, with minimum calibration factors of 0.72 and 0.73, respectively.
- simply-supported T-beam /
- bridge reinforcement /
- external prestressing /
- target reliability /
- design optimization

HTML全文

参考文献(20)

[1]	高荣雄,吴国俱,乐颖,等. 体外预应力加固RC梁受力性能试验[J]. 中国公路学报,2017,30(10):69-80 ,136.
[2]	张晶晶,窦远明,张硕. 不同加固方式对钢筋混凝土梁抗弯性能的影响[J]. 硅酸盐通报,2017,36(12):4014-4019.
[3]	GAO J H. The mechanic analysis and construction method on damaged beam of external prestressing reinforcement[J]. Applied Mechanics & Materials, 2014, 501-504:1039-1042.
[4]	LI J X. Exploration on application of external prestressing technology in reinforcement of beam bridge[J]. Northern Communications, 2018.
[5]	王云飞,孟少平,贾卉琳,等. 体外预应力加固混凝土简支梁的反拱挠度分析[J]. 东南大学学报(自然科学版),2007(6):1032-1035.
[6]	韩雪,薛彦涛. 体外预应力加固简支梁实例计算分析[J]. 建筑科学,2013,29(7):7-10.
[7]	CHOI J Y. Comparative study of effective stresses of concrete beams strengthened using carbon-fiber-reinforced polymer and external prestressing tendons[J]. Structure and Infrastructure Engineering, 2012, 10(6):753-66.
[8]	TAKEDA K, TANAKA K, SOMEYA T, et al. Seismic retrofit of reinforced concrete building in japan using external precast prestressed concrete frames[J]. PCI Journal, 2013, 58(3):41-61.
[9]	门晓溪. 体外预应力加固简支T梁受力特性数值分析研究[D]. 沈阳:东北大学,2011.
[10]	乐颖. 体外预应力加固RC梁力学性能试验研究[D]. 武汉:华中科技大学,2017.
[11]	毛德均,许鹏,陈旭,等. 体外预应力加固钢筋混凝土简支梁的设计参数研究[J]. 公路工程,2021,46(2):8-14.
[12]	中华人民共和国交通运输部. 公路工程结构可靠性设计统一标准:JTG 2120-2020[S]. 北京:人民交通出版社,2020.
[13]	何义恒,李文盛. 外加预应力加固RC梁挠度计算的可靠度分析[J]. 安徽建筑,2010,17(1):30-31.
[14]	彭灿. 在役桥梁可靠性评估及加固经济性分析[D]. 大连:大连理工大学,2018.
[15]	袁阳光,韩万水,谢青,等. 非平稳车载及抗力劣化进程下混凝土桥梁时变可靠性评估[J]. 中国公路学报,2020,33(3):85-96.
[16]	STRAUB D, SCHNEIDER R, BISMUT E, et al. Reliability analysis of deteriorating structural systems[J]. Structural Safety, 2020, 82:101877.
[17]	ALI O, BIGAUD D, FERRIER E. Comparative durability analysis of CFRP-strengthened RC highway bridges[J]. Construction and Building Materials, 2012, 30:629-642.
[18]	王慧青,张大山,林旭华,等. 碳纤维增强复材加固钢筋混凝土轴压圆柱可靠度评估与规范评价[J]. 工业建筑,2021,51(6):206-211 ,216.
[19]	OOSTERHUIS W P, SEVERRNS M J. Performance specifications and six sigma theory:clinical chemistry and industry compared[J]. Clinical Biochemistry, 2018, 56:12-17.
[20]	尤保健. 基于六西格玛理论的轴流泵叶轮水力效率影响因子分析[J]. 水电能源科学,2020,38(2):168-171.