自复位装配式结构的研究现状

葛元辉; 李延昌; 韩良君; 李军; 梁家栋; 王荣棋; 查晓雄

doi:10.13204/j.gyjzG21121405

自复位装配式结构的研究现状

doi: 10.13204/j.gyjzG21121405

1. 中铁建设集团南方工程有限公司, 广东深圳 511400;
2. 深圳市特区建工科工集团有限公司, 广东深圳 518034;
3. 哈尔滨工业大学(深圳) 土木工程与环境工程学院, 广东深圳 518055

详细信息

作者简介:
葛元辉,男,1986年出生,工程师。

通讯作者:
查晓雄,博士,教授,博士研究生导师,zhaxx@hitsz.edu.cn。

计量
- 文章访问数: 155
- HTML全文浏览量: 29
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2021-12-14
- 网络出版日期: 2022-06-30
- 刊出日期: 2022-02-20

Research Status of Perfabricated Self-Centering Structures

1. China Railway Construction Group South Engineering Co., Ltd.,Shenzhen 511400, China;
2. Shenzhen Special Economic Zone Construction Engineering Group Co., Ltd., Shenzhen 518034, China;
3. School of Civil Environment Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China

摘要

摘要: 近年来,我国大力提倡装配式结构,而装配式混凝土框架结构是目前国内外研究和应用最多的结构体系之一,其研究核心为梁柱连接节点形式及性能表现。传统的装配式干连接节点具备良好性能和减少现场湿作业等优点;而自复位结构不仅能实现震后基本没有残余变形,而且能实现震后快速恢复,投入正常使用。因此,介绍了装配式连接节点形式及一种带梁靴的螺栓连接的施工方法;并从自复位混凝土结构、自复位钢结构、基于位移设计方法三个方面对国内外自复位结构研究现状进行归纳总结。
- 装配式混凝土结构 /
- 自复位结构 /
- 螺栓连接
Abstract: In recent years, China has vigorously promoted prefabricated structures, and prefabricated concrete frame structures are currently one of the most researched and applied structural systems at home and abroad. The core of the research is the form and performance of the beam-column connection joint. The traditional prefabricated dry connection joint has the advantages of good performance and reduced on-site wet construction; while the self-centering structure can not only achieve basically no residual deformation after the earthquake, but also achieve the advantages of rapid recovery after the earthquake and put into normal use. Therefore, the form of prefabricated connection joints and the construction method of a bolted connection with beam shoes were introduced; and the research status of the self-centering structures at home and abroad were sumnarized from three aspects: self-centering concrete structures, self-centering steel structures and displacement-based design methods.
- prefabricated concrete structure /
- self-centreing structure /
- bolted

HTML全文

参考文献(55)

[1]	吕西林,陈云,毛苑君.结构抗震设计的新概念:可恢复功能结构[J].同济大学学报:自然科学版, 2011, 35(1):23-30.
[2]	周颖,吕西林.摇摆结构及自复位结构研究综述[J].建筑结构学报, 2011, 32(9):15-25.
[3]	Peikko Group.地震带的应用:概览[EB/OL].https://www.peikko.cn/products/connections-for-seismic-design/overview/.2019.
[4]	Peikko Group. Effective Bolted Beam-to-Column Connections Technical Manual[M]. Lahti:Peikko Group,2019.
[5]	PRIESTLEY M. Overview of PRESSS research program[J]. PCI Journal, 1991, 36(4):50-57.
[6]	CHEOK G S, LEW H S. Performance of precast concrete beam-to-column connections subject to cyclic loading[J]. PCI Journal, 1991, 36(3):56-67.
[7]	PRIESTLEY M, MACRAE G A. Seismic tests of precast beam-to-column joint sub-assemblages with unbonded tendons[J]. PCI Journal, 1996, 41(1):64-81.
[8]	PRIESTLEY M, TAO J R. Seismic response of precast prestressed concrete frames with partially debonded tendons[J]. PCI Journal, 1993, 38(1):58-69.
[9]	STANTON J, STONE W C, CHEOK G S. A hybrid reinforced precast frame for seismic regions[J]. PCI Journal, 1997, 42(2):20-23.
[10]	American Concrete Institute (ACI). Innovation Task Group 1 and Collaborators. Acceptance criteria for moment frames based on structural testing:ACI T1.1-01[R].Michigan:ACI, 2001.
[11]	STONE W C, CHEOK G S, STANTON J F. Performance of hybrid moment-resisting precast beam-column concrete connections subjected to cyclic loading[J]. ACI Structural Journal, 1995, 91(2):229-249.
[12]	PRIESTLEY M, SRITHARAN S, CONLEY J R, et al. Preliminary results and conclusions from the presss five-story precast concrete test building[J]. PCI Journal, 1999, 44(6):42-67.
[13]	PRIESTLEY M J N. Direct displacement-based seismic design of buildings[J]. PCI Journal, 1998, 43(6):8-20.
[14]	International Conference of Building Officials (ICBO).Uniform building code:UBC C-97[S].Whittier:ICBO 1997.
[15]	LI L, MANDER J B, DHAKAL R P. Bidirectional cyclic loading experiment on a 3D beam-column joint designed for damage avoidance[J]. Journal of Structural Engineering, 2008, 134(11):1733-1742.
[16]	RODGERS G W, SOLBERG K M, MANDER J B, et al. High-force-to-volume seismic dissipators embedded in a jointed precast concrete frame[J]. Journal of Structural Engineering, 2012, 138(3):375-386.
[17]	MORGEN B G, KURAMA Y C, ASCE M. Seismic design of friction-damped precast concrete frame structures[J]. Journal of Structural Engineering, 2007, 133(11):1501-1511.
[18]	MORGEN B G, KURAMA Y C. Seismic response evaluation of posttensioned precast concrete frames with friction dampers[J]. Journal of Structural Engineering, 2008, 134(1):132-145.
[19]	蔡小宁,孟少平,孙巍巍.自复位预制框架边节点组件受力性能试验研究[J].工程力学, 2014, 31(3):160-167.
[20]	吕西林,崔晔,刘兢兢.自复位钢筋混凝土框架结构振动台试验研究[J].建筑结构学报,2014,35(1):19-26.
[21]	郭彤,宋良龙.腹板摩擦式自定心预应力混凝土框架梁柱节点的理论分析[J].土木工程学报, 2012, 45(7):73-79.
[22]	HUANG L J, PATRICIA M C, ZHOU Z. Seismic design and performance of self-centering precast concrete frames with variable friction dampers[J]. Engineering Structures, 2021, 245:1-17.
[23]	MOHAMED N E, ASSEFA J D, JINKOO K. Seismic retrofit of RC buildings using self-centering PC frames with friction-dampers[J]. Engineering Structures, 2020, 208:1-18.
[24]	谢鲁齐,吴京,章锦洋,等.基于可更换耗能连接的装配式混凝土梁柱节点力学性能试验研究[J].东南大学学报,2021,51(1):1-8.
[25]	李俊杰.新型自复位PC框架节点抗震性能研究[D].福州:福州大学,2018.
[26]	WANG H S, EDOARDO M M, PENG P. Experimental study of a novel precast prestressed reinforced concrete beam-to-column joint[J]. Engineering Structures, 2018, 156:68-81.
[27]	郑炜鋆.无黏结预应力混凝土梁的ABAQUS有限元模拟[J].福建建筑, 2014(11):51-53,82.
[28]	LI L X, LI H N, LI C. Modeling of force-displacement behavior of post-tensioned self-centering concrete connections[J]. Engineering Structures, 2019, 198:1-18.
[29]	TAKEAKI K. Moment and energy dissipation capacities of post-tensioned precast concrete connections employing a friction device[J]. Engineering Structures, 2017, 138:170-180.
[30]	ENGLEKIRK R E. Design-construction of the Paramount A-39-story precast prestressed concrete apartment building[J]. PCI Journal, 2002, 47(4):56-71.
[31]	SABOL E. Reinforcing of steel moment connections with cover plates:benefits and limitations[J]. Engineering Structures, 1998, 53(9):52-67.
[32]	BAYAT M, ZAHRAI S M. Seismic performance of mid-rise steel frames with semi-rigid connections having different moment capacity[J]. Steel and Composite Structures, 2017, 25(1):1-17.
[33]	CHEN S J, YEH C H, CHU J M. Ductile steel beam-to-column connections for seismic resistance[J]. Journal of Structural Engineering, 1996, 122(11):1292-1299.
[34]	GARLOCK M E M. Design, Analysis, and experimental behavior of seismic resistant post-tensioned steel moment resisting frames[D]. Pennsylvania:Lehigh University, 2002.
[35]	RICLES J M, SAUSE R, GARLOCK M E M, et al. Posttensioned seismic-resistant connections for steel frames[J]. Journal of Structural Engineering, 2001, 127(2):113-121.
[36]	GARLOCK M E M, SAUSE R, RICLES J M. Behavior and design of posttensioned steel frame systems[J]. Journal of Structural Engineering, 2007, 133(3):389-399.
[37]	GARLOCK M E M, RICLES J M, SAUSE R. Influence of design parameters on seismic response of post-tensioned steel MRF systems[J]. Engineering Structures, 2008, 30(4):1037-1047.
[38]	GARLOCK M E M, LI J. Steel self-centering moment frames with collector beam floor diaphragms[J]. Journal of Constructional Steel Research, 2007, 64:526-238.
[39]	ROJAS P, RIDES J M, SAUSE R. Seismic performance of post-tensioned steel moment resisting frames with friction devices[J]. Journal of Structural Engineering, 2005, 131(4):529-540.
[40]	CHOU C C, CHEN J H, CHEN Y C, et al. Evaluating performance of post-tensioned steel connections with strands and reduced flange plates[J]. Earthquake Engineering&Structural Dynamics, 2006, 35(9):1167-1185.
[41]	CHOU C C, WANG Y C, CHEN J H. Seismic design and behavior of post-tensioned steel connections including effects of a composite slab[J]. Engineering Structures, 2008, 30(11):3014-3023.
[42]	CHOU C C, CHEN J H. Tests and analyses of a full-scale post-tensioned RCS frame subassembly[J]. Journal of Constructional Steel Research, 2010, 66(11):1354-1365.
[43]	CHOU C C, CHEN J H. Seismic design and shake table tests of a steel post-tensioned self-centering moment frame with a slab accommodating frame expansion[J]. Earthquake Engineering&Structural Dynamics, 2011, 40(11):1241-1261.
[44]	CHOU C C, CHEN J H. Column restraint in post-tensioned self-centering moment frames[J]. Earthquake Engineering&Structural Dynamics, 2010, 39, 35(12):1342-1366.
[45]	张艳霞,黄尾振,郑明召,等.考虑楼板效应的装配式自复位钢框架节点弯矩-转角理论研究[J].钢结构, 2019, 34(3):1-8.
[46]	张艳霞,叶吉健,杨凡,等.自复位钢框架结构抗震性能动力时程分析[J].土木工程学报, 2015, 48(7):30-40.
[47]	黄小刚.自复位梁钢框架抗震性能与设计方法研究[D].南京:东南大学, 2019.
[48]	ZHU R Z, GUO T, FRANK M. Seismic design of self-centering viscous-hysteretic devices used for steel moment-resisting frames[J]. Engineering Structures, 2021, 239(4):1-17.
[49]	PRIESTLEY M J N. Direct displacement-based design of precast/prestressed concrete buildings[J]. PCI Journal, 2002, 47(6):66-79.
[50]	PRIESTLEY M, CALVI G M, KOWALSKY M J. Displacement-based seismic design of structures[M]. Pavia:IUSS Press, 2007.
[51]	SHIBATA A, SOZEN M A. Substitute structure method for seismic design in RC[J]. Journal of the Structural Division, 1976, 102(1):1-18.
[52]	JACOBSEN L S. Damping in composite structures[C]//Proc. of WCEE. 1960:1029-1044.
[53]	JACOBSEN L. Steady forced vibrations as influenced by damping[J]. Transactions ASME, 1930, 52:169-181.
[54]	欧进萍,吴斌,龙旭.耗能减振结构的抗震设计方法[J].地震工程与工程振动, 1998(2):98-107.
[55]	CALVI G M, PALERMO A, PAMPANIN S. Use of "controlled rocking" in the seismic design of bridges[C]//Proceedings of the 13th world Conference on Earthquake Engineering. 2005:1-16.