大跨钢结构厂房顶升的加固设计研究

马云龙; 王秀丽; 冯竹君; 苟宝龙; 侯鸿杰

doi:10.13204/j.gyjzG21061602

大跨钢结构厂房顶升的加固设计研究

doi: 10.13204/j.gyjzG21061602

马云龙¹,
王秀丽^2,3, ,,
冯竹君^2,3,
苟宝龙^2,3,
侯鸿杰^2,3

1. 甘肃建投土木工程建设集团有限责任公司, 兰州 700070;
2. 兰州理工大学土木工程学院, 兰州 730050;
3. 西部土木工程防灾减灾教育工程研究中心, 兰州 730050

基金项目:

甘肃省建设科技攻关项目(JK2020-26)。

国家自然科学基金项目(51778273)

详细信息

作者简介:
马云龙,男,1981年出生,高级工程师。

通讯作者:
王秀丽,女,1963年出生,教授,博士,博士生导师,1135739056@qq.com。

计量
- 文章访问数: 145
- HTML全文浏览量: 17
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2021-06-16
- 网络出版日期: 2022-03-29

RESEARCH ON STRENGTHENING DESIGN FOR JACKING OF A LONG-SPAN STEEL PLANT

MA Yunlong¹,
WANG Xiuli^{2,3
, ,},
FENG Zhujun^2,3,
GOU Baolong^2,3,
HOU Hongjie^2,3

1. Gansu Construction Investment Civil Engineering Construction Group Co., Ltd., Lanzhou 700070, China;
2. Lanzhou University of Technology, School of Civil Engineering, Lanzhou 730050, China;
3. Western Center of Disaster Mitigation of Ministry of Education, Lanzhou 730050, China

摘要

摘要: 某大跨钢结构厂房采用钢框架结构体系,在施工建造过程中,其一层钢梁挠度超过GB 50017—2017《钢结构设计标准》中挠度限值。为满足施工及后续使用要求,需对结构一层钢框梁进行加固。通过对加固前、后顶升钢梁的计算及现场顶升过程的监测,对比分析加固前、后的结构受力及变形。结果表明:钢梁的变形过大是设计、施工等多方面造成的;设计的顶升装置能较好地实现钢梁顶升,并且钢框梁的加固顶升方案合理;钢框梁加固顶升后,能满足现有的吊车梁通行需求,结构安全可靠,顶升加固方案安全经济。
- 钢结构厂房 /
- 大跨度钢梁 /
- 变形控制 /
- 顶升加固 /
- 现场实测
Abstract: A long-span steel plant was adopted a steel frame structure system. Under the construction, the deflection of steel beams on the first floor exceeded the limit of Standard for Classification of Steel Structures(GB 50017—2017). In order to meet the requirements of construction and subsequent use, it was necessary to strengthen the steel beams on the first floor of the structure. Through the calculation of the jacked steel beams and the monitoring of the on-site jacking process before and after reinforcement, the comparison and analysis of the structural stress and deformation before and after reinforcement showed that the excessive deformation of the steel beams was due to many reasons such as design and construction. The designed jacking devices could well realize the jacking of steel beams, and the reinforcement scheme for the jaking of steel beams was reasonable. After the steel beams were strengthened and jacked, the traffic demand of the existing crane beam was met, the structure became safe and reliable, which proved that the reinforcement scheme for lifting was safe and economical.
- steel plant /
- long-span steel beam /
- deformation control /
- reinforcement for jacking /
- field measurement

HTML全文

参考文献(8)

[1]	王元清,宗亮,施刚,等.钢结构加固新技术及其应用研究[J].工业建筑,2017,47(2):1-6 ,22.
[2]	雷平,张乐翼,赵智慧.钢结构厂房加固方法刍议[J].工程抗震与加固改造,2020,42(5):173.
[3]	罗晓霖,关晓松.某炼钢厂房结构体系的改造与加固[J].工业建筑,2012,42(增刊1):267-268,299.
[4]	程江敏,程波,邱鹤,等.钢结构加固方法研究进展[J].钢结构,2012,27(11):1-7.
[5]	王学军.大跨度组合钢梁楼盖加固技术研究[J].建材技术与应用,2017(2):6-7.
[6]	王海,王伟,诸宏博.大跨度门式刚架结构屋面钢梁加固设计研究[J].浙江建筑,2016,33(9):30-39.
[7]	闫翔宇,李路川,于敬海.既有门式刚架结构加固改造方案研究[J].工程抗震与加固改造,2014,36(3):86-91.
[8]	王元清,王喆,石永久,等.门式刚架轻钢房屋钢结构厂房加固设计[J].工业建筑,2001,31(8):51-52.