立式工业厂房不同结构体系综合效益的比较分析

胡晓文; 聂鑫

doi:10.13204/j.gyjzG21053113

立式工业厂房不同结构体系综合效益的比较分析

doi: 10.13204/j.gyjzG21053113

胡晓文¹,
聂鑫^2, ,

1. 清华大学土木工程系, 北京 100084;
2. 清华大学土木工程安全与耐久教育部重点实验室, 北京 100084

基金项目:

国家重点研发计划项目(2018YFC0705700,2018YFC0705704)。

详细信息

作者简介:
胡晓文,女,1998年出生,博士研究生。

通讯作者:
聂鑫,男,1984年出生,博士,副教授,xinnie@tsinghua.edu.cn。

计量
- 文章访问数: 116
- HTML全文浏览量: 26
- PDF下载量: 7
- 被引次数: 0
出版历程
- 收稿日期: 2021-05-31
- 网络出版日期: 2022-06-30
- 刊出日期: 2022-02-20

Comparison and Analysis on Different Structural Systems of Multi-Story Industrial Plants

HU Xiaowen¹,
NIE Xin^{2
, ,}

1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;
2. Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Tsinghua University, Beijing 100084, China

摘要

摘要: 在采用钢筋混凝土结构和钢结构的传统立式工业厂房中,当其跨度比较大、荷载比较大时,采用钢-混凝土组合结构体系能带来更好的综合效益。针对立式粮仓厂房堆放粮食、承受荷载较大的特点,以海南省某立式粮仓厂房框架结构为例,对其采用钢筋混凝土结构、钢结构和钢-混凝土组合结构分别进行方案设计并统计三种结构体系的经济指标。利用有限元计算软件对结构进行静力推覆分析和动力弹塑性时程分析,对比不同结构体系的承载力、抗侧刚度、层间位移角、出铰情况、破坏形式等指标。分析结果表明,钢-混凝土组合结构体系以其优越的受力性能、便捷的施工性能以及良好的综合效益,在立式工业厂房中具有广阔的应用前景。
- 立式工业厂房 /
- 结构体系 /
- 静力推覆分析 /
- 动力弹塑性时程分析 /
- 抗震性能 /
- 钢-混凝土组合结构
Abstract: In traditional vertical industrial workshops that use reinforced concrete structures and steel structures, when the span is relatively large and the load is relatively heavy, the use of a steel-concrete composite structure system can bring better overall benefits. As a place where grain is stacked, the vertical granary workshop has the characteristic of bearing a relatively large load. In order to investigate the comprehensive benefits of different structural systems used in multi-story industrial workshops, a granary frame structure in Hainan Province was taken as an example. Based on the design software, the reinforced concrete structure, steel structure and steel-concrete composite structure were adopted for scheme design, and the economic indicators of the three structural systems were calculated. The static pushover analysis and dynamic elasto-plastic time history analysis of the structures were carried out by using the finite element analysis software. Performance indexes including the load-bearing capacity, lateral stiffness, story drift and distribution of plastic hinges of different structural systems were compared. The analysis results exhibit that the steel-concrete composite structure has broad application prospects in multi-story industrial plants due to its superior mechanical performance, convenient construction performance and extraordinary comprehensive benefits.
- multi-story industrial plant /
- structural system /
- static pushover analysis /
- dynamic elasto-plastic time history analysis /
- seismic performance /
- steel-concrete composite structure

HTML全文

参考文献(18)

[1]	聂建国,刘明,叶列平.钢-混凝土组合结构[M].北京:中国建筑工业出版社, 2005.
[2]	钱稼茹,赵作周,纪晓东.高层建筑结构设计[M].北京:中国建筑工业出版社, 2018.
[3]	NAKASHIMA M, MATSUMIYA T, SUITA K, et al. Full-scale test of composite frame under large cyclic loading[J]. Journal of Structural Engineering, 2007, 133(2):297-304.
[4]	聂建国,陶慕轩,黄远,等.钢-混凝土组合结构体系研究新进展[J].建筑结构学报, 2010, 31(6):71-80.
[5]	UDAGAWA K, MIMURA H. Behavior of composite beam frame by pseudo dynamic testing[J]. Journal of Structural Engineering, 1991, 117(5):1317-1334.
[6]	中华人民共和国住房和城乡建设部.建筑结构荷载规范:GB 50009-2012[S].北京:中国建筑工业出版社, 2012.
[7]	中华人民共和国住房和城乡建设部.混凝土结构设计规范:GB 50010-2010[S].北京:中国建筑工业出版社, 2010.
[8]	陶慕轩,聂建国.考虑楼板空间组合效应的组合框架体系纤维模型[J].建筑结构学报,2013, 34(11):1-9.
[9]	李一昕,陶慕轩,丁然,等.组合框架-核心筒体系抗震性能动力弹塑性分析方法[J].建筑结构学报, 2015, 36(增刊1):1-7.
[10]	陶慕轩,聂建国.材料单轴滞回准则对组合构件非线性分析的影响[J].建筑结构学报, 2014, 35(3):24-32.
[11]	许立言,聂建国,丁然,等.独柱高架站台组合结构体系设计及分析[J].建筑结构学报, 2015, 36(增刊1):34-41.
[12]	聂建国,陶慕轩.多高层钢-混凝土组合框架结构体系弹塑性分析模型[J].建筑结构学报, 2010, 31(7):1-12.
[13]	聂建国,陶慕轩.采用纤维梁单元分析钢-混凝土组合结构地震反应的原理[J].建筑结构学报, 2011, 32(10):1-10.
[14]	聂建国,陶慕轩.采用纤维梁单元分析钢-混凝土组合结构地震反应的应用[J].建筑结构学报, 2011, 32(10):11-20.
[15]	庄亮东,陈伟,聂鑫,等.抗拔不抗剪连接件在钢-混凝土组合框架结构中的应用[J].建筑结构学报, 2020, 41(1):104-112.
[16]	黄羽立,陆新征,叶列平,等.基于多点位移控制的推覆分析算法[J].工程力学, 2011, 28(2):18-23.
[17]	叶列平,曲哲,马千里,等.从汶川地震框架结构震害谈"强柱弱梁"屈服机制的实现[J].建筑结构, 2008(11):52-59,67.
[18]	中华人民共和国住房和城乡建设部.建筑抗震设计规范:GB 50011-2010[S].北京:中国建筑工业出版社, 2010.