EXPERIMENTAL RESEARCH ON SHEAR CAPACITY OF PRESTRESSED TRUSS-TYPE STEEL-REINFORCED CONCRETE BEAMS
-
摘要: 为研究预应力、剪跨比及竖腹杆间距对新型预应力桁架式钢骨混凝土梁抗剪性能的影响,设计制作了5根预应力桁架式钢骨混凝土混凝土梁和1根非预应力桁架式钢骨混凝土梁进行静力抗剪性能试验,研究试件的开裂荷载、极限荷载及挠度变形等。试验结果表明:预应力的施加以及竖腹杆间距的减小提高了试件的抗剪承载力并且有效限制了裂缝的产生与发展,但随着剪跨比的增大试件的抗剪承载力降低。基于抗剪破坏机理以及试验数据,提出了预应力桁架式钢骨混凝土梁的抗剪承载力计算式,以供工程设计参考。Abstract: In order to study the influence of prestress, shear-span ratio and vertical girder spacing on the shear properties of new type prestressed trussed steel-reinforced concrete beams, in this paper, five prestressed trussed steel reinforced concrete beams and one non-prestressed trussed steel reinforced concrete beam were designed and fabricated for the static shear test. The cracking load, ultimate load and deflection deformation of specimens were studied. The experimental results showed that the application of pre-stress and the reduction of the distance between vertical webs improved the shear capacity of members and effectively limited the generation and development of cracks, while the shear capacity of members decreased with the increase of the shear-span ratio. Based on the shear failure mechanism and experimental data, the shear bearing capacity formula of prestressed trussed steel-reinforced concrete beams was presented for engineering design reference.
-
Key words:
- prestressed concrete /
- truss-type /
- shear bearing capacity /
- experimental study
-
[1] 唐维.浅析钢结构在住宅建设中的应用[J].硅谷, 2008(8):53. [2] 李爱群, 周通, 缪志伟.模块化建筑体系研究进展[J].工业建筑, 2018, 48(3):132-139, 150. [3] 白晓红, 白国良.新型钢-混凝土组合结构的应用与展望[J].工业建筑, 2006, 36(增刊1):521-527. [4] 唐光暹, 邓志恒, 陈东, 等.桁架式钢骨混凝土梁组合框架试件抗震性能研究[J].世界地震工程, 2014, 30(2):63-70. [5] 周颖, 缪驰, 闫峰, 等.钢骨混凝土连梁联肢剪力墙抗震性能试验研究及有限元分析[J].建筑结构学报, 2015, 36(3):36-45. [6] DENG Z H, QIANG H, JIAN Z, et al.Structural Performance of Steel-Truss-Reinforced Composite Joints Under Cyclic Loading[J].Institution of Civil Engineers, 2018, 171(2):130-148. [7] 康苗, 朱翔, 王蕊, 等.侧向冲击作用下圆钢管-钢骨混凝土柱抗冲击性能研究[J].建筑结构学报, 2020, 41(增刊1):128-135. [8] MIZAN A, QING Q L, VIPULKUMAR I P, et al.Behavior of Eccentrically Loaded Double Circular Steel Tubular Short Columns Filled with Concrete[J].Engineering Structures, 2019, 201.DOI: 10.1016/j.engstruct.2019.109790. [9] 中华人民共和国住房和城乡建设部.混凝土物理力学性能试验方法标准:GB/T 50081-2019[S].北京:中国建筑工业出版社, 2019. [10] 中华人民共和国国家质量监督检验检疫总局.金属材料拉伸试验第1部分:室温试验方法:GB/T 228.1-2010[S].北京:中国标准出版社, 2010. [11] 邓志恒, 陈贺功, 林绍明.桁架式钢骨混凝土梁斜截面承载力试验[J].广西大学学报(自然科学版), 2010, 35(1):12-16. [12] 梁云达, 陈利华, 任磊.桁架-拱模型理论分析钢筋混凝土梁[J].山西建筑, 2010(9):53-54.
点击查看大图
计量
- 文章访问数: 168
- HTML全文浏览量: 30
- PDF下载量: 9
- 被引次数: 0