月壤原位成型技术及其结构体系研究

蔡建国; 张骞; 王立武; 杜彩霞; 张慧中; 王永滨; 武士轻

doi:10.13204/j.gyjzG21020403

月壤原位成型技术及其结构体系研究

doi: 10.13204/j.gyjzG21020403

1. 东南大学国家预应力工程技术研究中心, 南京 211189;
2. 北京空间机电研究所, 北京 100076

基金项目:

国家重点研发计划项目（2018YFC0705800）。

详细信息

作者简介:
蔡建国,男,1984年出生,教授,博士生导师。电子信箱:j.cai@seu.edu.cn

计量
- 文章访问数: 158
- HTML全文浏览量: 7
- PDF下载量: 8
- 被引次数: 0
出版历程
- 收稿日期: 2021-02-04
- 网络出版日期: 2021-10-27

RESEARCH ON IN-SITU FORMING TECHNIQUE OF THE LUNAR SOIL AND ITS STRUCTURE SYSTEM

1. National Prestress Engineering Research Center, Southeast University, Nanjing 211189, China;
2. Beijing Institute of Space Mechanics and Electricity, Beijing 100076, China

摘要

摘要: 月壤原位成型技术作为月球资源原位利用技术体系中的研究热点，是在月表制造建筑材料及实施月表基础设施建设的关键。基于国内外月壤原位成型技术发展现状，采用放电等离子烧结技术（SPS）实现了模拟月壤的成型，并通过准静态压缩试验研究其抗压强度和弹性模量。最后以石拱桥结构和榫卯结构的建造理念，进行了月球基地结构体系的设计，提出了构件连接方式，并通过有限元模拟分析了拱形结构对于建造月壤成型结构的适用性，提供月壤原位建造的可行路径。
- 模拟月壤 /
- 放电等离子烧结技术(SPS) /
- 抗压承载力 /
- 榫卯连接 /
- 有限元分析
Abstract: As a research hotspot of in-situ utlization techniques for lunar resources, the in-situ forming technique of the lunar soil is the key to the manufacture of construction materials and the implementation of the lunar surface infrastructure. Based on the development status of in-situ lunar soil molding technique, spark plasma sintering (SPS) was used to achieve the modeling of simulated lunar soil. A quasi-static compression test was conducted on the molded specimen to study its compressive strength and elastic modulus. Based on the construction concept of the stone arch bridge structure and tenon structure, the lunar base structure system was designed, and the component connection method was proposed. Moreover, the applicability of arch structure to the construction of lunar soil molding structure was analyzed by finite element simulation. The results could provide a feasible path to achieve the in-situ construction by the lunar soil.
- simulated lunar soil /
- spark plasma sintering (SPS) /
- compressive bearing capacity /
- mortise-tenon joint /
- finite element analysis

HTML全文

参考文献(22)

[1]	SANDERS G B. Space Resource Utilization Near-Term Missions and Long-Term Plans for Human Exploration:NASA-20160002061[R]. Washington D C:NASA, 2016.
[2]	SANDERS G B, LARSON W E. Progress Made in Lunar in Situ Resource Utilization Under NASA's Exploration Technology and Development Program[J]. Journal of Aerospace Engineering, 2013, 26(1):5-17.
[3]	BASSLER J A, BODIFORD M P, HAMMOND M S, et al. In Situ Fabrication and Repair(ISFR) Technologies, New Challenges for Exploration Collection of Technical Papers[C]//Proceedings of the 44th AIAA Aerospace Sciences Meeting. Reno, NV:2006:4166-4172.
[4]	CLINTON R G. The Road to Realizing In-Space Manufacturing:NASA-20140008760[R]. Washington D C:NASA, 2014.
[5]	ZENG X W, BURNOSKI L, AGUI H J, et al. Calculation of Excavation Force for ISRU on Lunar Surface[C]//45th AIAA Aerospace Sciences Meeting and Exhibit. Reno, NV:2007:2007-1474.
[6]	梁磊.浅层月壤铲挖动力学建模及应用研究[D].哈尔滨:哈尔滨工业大学,2014.
[7]	ALLAN S M, MERRITT B J, GRIFFIN B F, et al. High Temperature Microwave Dielectric Properties of JSC-1AC Lunar Simulant[J]. Journal of Aerospace Engineering, 2013, 26(4):874-881.
[8]	宋蕾,徐佼,唐红,等.模拟月壤成型研究现状[J]. 矿物学报,2020,40(1):49-59.
[9]	王志浩,刘宇明,田东波,等.月壤原位成型技术工程适用性浅析[J].航天器环境工程,2018,35(3):298-306.
[10]	王志浩,马子良,田东波,等. 基于激光烧结升温特性分析的月壤原位成型技术研究[J].装备环境工程,2020,17(3):65-70.
[11]	CLINTON R G. The Road to Realizing in-Space Manufacturing:NASA-20140008760[R]. Washington D C:NASA, 2014.
[12]	阮建明,黄培云.粉末冶金原理[M].北京:机械工业出版社,2016.
[13]	ALEXIADIS A, ALBERINI F, MEYER M E. Geopolymers from Lunar and Martian Soil Simulants[J]. Advances in Space Research, 2016,59(1):490-495.
[14]	WANG K T, TANG Q, CUI X M, et al. Development of Near-Zero Water Consumption Cement Materials Via the Geopolymerization of Tektites and Its Implication for Lunar Construction[J]. Scientific Reports, 2016(6). DOI: 10.1038/srep29659.
[15]	LI H, ZHAO W, WU X, et al. 3D Printing and Solvent Dissolution Recycling of Polylactide-Lunar Regolith Composites by Material Extrusion Approach[J]. Polymers, 2020, 12(8). DOI: 10.3390/polym12081724.
[16]	HOSHINO T, WAKABAYASHI S, YOSHIHARA S, et al. Key Technology Development for Future Lunar Utilization:Block Production Using Lunar Regolith[J]. Transactions of the Japan Society for Aeronautical & Space Sciences Aerospace Technology Japan, 2016, 14(30):35-40.
[17]	ZHANG X, KHEDMATI M, KIM Y R, et al. Microstructure Evolution During Spark Plasma Sintering of FJS-1 Lunar Soil Simulant[J]. Journal of the American Ceramic Society, 2020, 103(2):899-911.
[18]	蒋明镜,李立青. TJ-1模拟月壤的研制[J]. 岩土工程学报,2011(33):209-214.
[19]	ZHOU C, CHEN R, XU J, et al. In-Situ Construction Method for Lunar Habitation:Chinese Super Mason[J]. Automation in Construction, 2019, 104:66-79.
[20]	欧阳自远,李春来,邹永廖,等.月球探测的进展与我国的月球探测[J].中国科学基金,2003(4):3-7.
[21]	赵娜.月震特征及与地震的对比[J].空间科学学报,2020,40(2):264-272.
[22]	丁烈云,徐捷,骆汉宾,等.月面建造工程的挑战与研究进展[J].载人航天,2019,25(3):277-285.