我国高放废物地质处置巷道中回填材料安装布置方案分析

吕敏; 侯伟; 王旭宏; 杨球玉; 吕涛; 夏加国; 李昱茜; 殷玥

doi:10.13204/j.gyjzG20072114

我国高放废物地质处置巷道中回填材料安装布置方案分析

doi: 10.13204/j.gyjzG20072114

中国核电工程有限公司, 北京 100840

基金项目:

国家国防科技工业局项目（科工二司（2017）1405号）。

详细信息

作者简介:
吕敏,女,1993年出生,博士,工程师。电子信箱:lvmin568@163.com

计量
- 文章访问数: 127
- HTML全文浏览量: 11
- PDF下载量: 0
- 被引次数: 0
出版历程
- 收稿日期: 2020-07-21
- 刊出日期: 2020-11-23

ANALYSIS ON INSTALLATION SCHEMES FOR BACKFILL MATERIALS IN DISPOSAL DRIFTS OF GEOLOGICAL DISPOSAL REPOSITORIES FOR HIGH-LEVEL RADIOACTIVE WASTES IN CHINA

China's Nuclear Power Engineering Co., Ltd., Beijing 100840, China

摘要

摘要: 处置巷道中回填材料作为高放废物地质处置库工程屏障系统的重要组成部分，要求其具有一定的安装密度以满足其屏障功能。基于我国高放废物地质处置概念和回填材料设计概念，结合回填砌块和膨润土小球的参考设计，开展回填材料安装密度的影响因素敏感性分析，发现砌块干密度和砌块填充度为主导因素。在此基础上，结合回填材料安装密度的设计要求，通过分析36个可能的安装布置方案，提出满足要求的设计参数范围，为我国高放废物地质处置库中回填材料的相关试验研究提供技术参考。
- 处置巷道 /
- 回填材料 /
- 安装干密度 /
- 敏感性分析 /
- 安装布置方案
Abstract: Backfill materials in disposal drifts are important engineering barriers in geological disposal repositories of high-level radioactive wastes; a certain installed dry density is required to meet its barrier function. Based on the concept of geological disposal of high-level radioactive wastes in China and the design concept of backfill materials, the sensitivity analysis of factors affecting installed densities of backfill materials by combining the reference design of backfill blocks and pellets was carried out. It was found that block dry densities and filling degree were the dominant factors. Then, combining the design requirements of the installed dry densities for backfills, feasible plans to meet the requirements were proposed on an analysis of 36 possible installation schemes. The study could provide technical reference to related experimental research of backfills in geological disposal repositories of high-level radioactive wastes in China.
- disposal drift /
- backfill material /
- installed dry density /
- sensitivity analysis /
- installation scheme

HTML全文

参考文献(10)

王驹. 高放废物深地质处置:回顾与展望[J]. 铀矿地质, 2009(2):71-77.

SKB. Design, Production and Initial State of the Backfill and Plug in Deposition Tunnels:TR-10-16[R]. Evenemangsgatan, Sweden:Svensk Kärnbränslehantering AB, 2010.

KETO P, HASSAN M, KARTTUNEN P, et al. Backfill Production Line 2012 Design, Production and Initial State of the Deposition Tunnel Backfill and Plug:POSIVA 2012-18[R]. POSIVA OY. 2012.

吕敏, 侯伟, 王旭宏,等.我国高放废物地质处置巷道中回填材料的设计要求[J].工业建筑, 2020,50(9):17-20.

侯伟, 杨球玉, 王旭宏,等.我国高放废物地质处置概念研究[J].工业建筑, 2020,50(9):1-7.

JOHANNESSON L E, NILSSON U. Deep Repository-Engineered Barrier Systems. Geotechnical Behaviour of Candidate Backfill Materials. Laboratory Tests and Calculations for Determining Performance of the Backfill:R-06-73[R]. Evenemangsgatan, Sweden:Svensk Kärnbränslehantering AB, 2006.

KETO P, DIXON D, JONSSON E, et al. Assessment of Backfill Design for KBS-3V Repository:R-09-52[R]. Evenemangsgatan, Sweden:Svensk Kärnbränslehantering AB, 2009.

蔡毅, 邢岩, 胡丹. 敏感性分析综述[J]. 北京师范大学学报(自然科学版), 2008(1):9-16.

孙富学, 梁本亮. 隧道衬砌结构耐久性寿命影响因素敏感性分析[J]. 地下空间与工程学报, 2006(2):214-220.

陈鹏, 徐博侯. 基于因素敏感性的边坡稳定可靠度分析[J]. 中国公路学报, 2012(4):42-48.

施引文献

资源附件(0)

访问统计