箱板装配式组合墙温度场数值模拟分析

贺青青; 薛辰; 李然; 兰涛; 门进杰; 赵钿

doi:10.13204/j.gyjzG20042005

箱板装配式组合墙温度场数值模拟分析

doi: 10.13204/j.gyjzG20042005

贺青青¹,
薛辰¹,
李然¹,
兰涛^1,2, ,,
门进杰²,
赵钿³

1. 中国船舶重工集团国际工程有限公司, 北京 100121;
2. 西安建筑科技大学土木工程学院, 西安 710055;
3. 中国建筑设计研究院有限公司, 北京 100089

基金项目:

陕西省教育厅重点实验室项目(17JS062)。

国家重点研发计划项目(2017YFC0703406)

中国船舶重工集团科技创新与研发项目(201815k)

首规委支持科研基金项目(2017-016)

详细信息

作者简介:
贺青青,女,1992年出生,硕士。

通讯作者:
兰涛,男,1976年出生,博士,研究员,qd_lantao@163.com。

计量
- 文章访问数: 79
- HTML全文浏览量: 6
- PDF下载量: 5
- 被引次数: 0
出版历程
- 收稿日期: 2020-04-20
- 网络出版日期: 2023-05-25
- 刊出日期: 2023-01-20

Numerical Simulation Analysis on Temperature Fields of Prefabricated Box-Plate Composite Walls

HE Qingqing¹,
XUE Chen¹,
LI Ran¹,
LAN Tao^{1,2
, ,},
MEN Jinjie²,
ZHAO Tian³

1. CSIC International Engineering Co., Ltd., Beijing 100121, China;
2. School of Civil Engineering, Xi’an University of Architecture & Technology, Xi’an 710055, China;
3. China Architecture Design & Research Group, Beijing 100089, China

摘要

摘要: 在确定箱板装配式组合墙各组成部分的热工参数、受火面和背火面的边界条件、接触条件等关键问题后,采用有限元分析软件ABAQUS建立其温度场分析模型,并用相关试验分析结果验证分析模型的有效性,得到了火灾下组合墙及其关键测点的全过程温度场分布规律,并对各组成部分进行参数分析。结果表明:岩棉厚度、覆面板材的种类、层数和厚度对组合墙内部温度场分布影响较大,其他因素影响较小。最后根据分析结果提出组合墙的抗火设计思路和关键温度控制点的温度预测式。
- 箱板装配式组合墙 /
- 温度场 /
- 优化设计 /
- 温度预测式
Abstract: After determining the thermal parameters, the boundary conditions of the fired surface, the backfire surface, and the contact conditions, the temperature field analysis model of the prefabricated box-plate composite wall was constructed by the FEM software ABAQUS. And the validity of the model was verified by relevant test results. On the basis, the temperature fields of the composite wall as well as its key measurement points were obtained, and the parameters of each component were also be analyzed. The results showed that the thickness of rock wool, the type and the thickness of cladding sheet, the numbers of layers had obvious influence on the temperature fields inside the composite wall, and the others factors had little effect. According to the analysis results, the fire-resistant design idea of composite walls and the temperature prediction formula of key temperature control points were proposed.
- prefabricated box-plate composite wall /
- temperature field /
- optimization design /
- temperature prediction formula

HTML全文

参考文献(17)

[1]	门进杰,贺青青,兰涛,等.箱板式钢结构住宅模型振动台试验设计[J].工业建筑, 2018, 48(9):9-14 ,82.
[2]	兰涛,郭昌灵,门进杰,等.箱板装配式钢结构住宅振动台模型试验研究[J].工业建筑, 2018, 48(9):1-8.
[3]	兰涛,宋昭,门进杰,等.角部加强的箱板式钢结构模块单元抗震性能试验研究[J].工业建筑, 2018, 48(9):15-21.
[4]	MAO H, QIN G C, LAN T. Study on the seismic performance of box-plate steel structure modular unit[J/OL]. Advances in Materials Science and Engineering, 2019[2019-05-02] .https:doi.org/10.1155/2019/4561631.
[5]	MEN J J, FAN G L, LAN T. Study on the seismic performance of box-plate steel structure with openings modular unit[J]. Materials, 2019, 12(24):4142-4159.
[6]	FENG M, WANG Y C, DAVIES J M. Thermal performance of cold-formed thin-walled steel panel systems in fire[J]. Fire Safety Journal,2003(38):365-394.
[7]	YU X M, HUANG Z H, BURGESSA I, et al. Nonlinear analysis of orthotropic composite slabs in fire[J]. Engineering Structures, 2008(30):67-80.
[8]	YU X M, HUANG Z H, BURGESSA I, et al. Heat transfer analysis of the composite slab in the cardington frame fire tests[J]. Fire Safety Journal, 2001(36):815-839.
[9]	陈伟.冷成型钢承重组合墙体抗火试验及理论研究[D].南京:东南大学, 2014.
[10]	李国强,韩林海,楼国彪.钢结构及钢-混凝土组合结构抗火设计[M].北京:中国建筑工业出版社, 2006.
[11]	李国强,蒋首超,林桂祥.钢结构抗火计算与设计[M].北京:中国建筑工业出版社, 2005.
[12]	European Committee for Standardization (ECS). Design of steel structures.part 1.2:structural fire design:ENN 1993-1-2[S].Brussels:ECS,1993.
[13]	WANG H B. Heat transfer analysis of components of construction exposed to fire[D]. Salford:University of Salford, 1995:204-226.
[14]	ASTM International.Standard test method for thermal conductivity of solids by means of the guarded-comparative-longitudinal heat flow technique:ASTM E1225-09[S]. New York:ASTM International, 2009.
[15]	尹亮,叶继红,倪照鹏,等.轻钢承重墙用硅酸钙热工参数及墙体耐火极限变参数模拟研究[J].消防科学与技术,2015,34(10):1342-1346 ,1351.
[16]	中华人民共和国住房和城乡建设部.建筑设计防火规范:GB 50016-2014[S].北京:中国计划出版社,2014.
[17]	赵廷涛.箱板式钢结构住宅底部加强区墙体抗震性能研究[D].西安:西安建筑科技大学, 2018.