耐候钢转角塔静载试验研究

张金锋; 张天忠; 杨进; 陈磊; 张露

doi:10.13204/j.gyjzG20041009

耐候钢转角塔静载试验研究

doi: 10.13204/j.gyjzG20041009

1. 国网安徽省电力有限公司, 合肥 230011;
2. 安徽华电工程咨询设计有限公司, 合肥 230022;
3. 北京航空航天大学合肥创新研究院, 合肥 230012;
4. 西南交通大学机械工程学院, 成都 610031

详细信息

作者简介:
张金锋,男,1980年出生,高级工程师。电子信箱:zhangjf0075@ah.sgcc.com.cn

计量
- 文章访问数: 69
- HTML全文浏览量: 5
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2020-04-10

Experimental Research on Weathering Steel Deviation Angle Towers Under Static Loads

1. State Grid Anhui Electric Power Co., Ltd., Hefei 230011, China;
2. Anhui Huadian Engineering Consulting & Design Co., Ltd., Hefei 230022, China;
3. Hefei Innovation Research Institute of Beihang University, Hefei 230012, China;
4. School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China

摘要

摘要: 为了验证耐候冷弯型钢应用于转角塔的安全性,以安徽某设计有限公司设计的220 kV电压等级的SJ2-18型转角塔为例,展开耐候冷弯型钢转角塔真型试验研究。采用耐候冷弯型钢制造的SJ2-18型转角塔通过了8个工况的100%设计载荷测试,当荷载达到140%时,转角塔支腿与塔脚连接螺栓发生剪切破坏。结果表明:SJ2-18型转角塔结构设计合理,强度安全可靠,能够满足DL/T 5154—2012《架空输电线路杆塔结构设计技术规定》的要求。研究结论为耐候冷弯型钢在转角塔中的应用提供了试验依据,对耐候冷弯型钢转角塔的推广提供了技术支持。
- 转角塔 /
- 真型试验 /
- 耐候冷弯型钢 /
- 位移 /
- 应变
Abstract: Taking a SJ2-18 deviation angle tower with 220 kV voltage level designed by a design company in Anhui as an example, the research on full-scale test of the tower was carried out to verify the safety of weather-resistant cold-formed steel applied to deviation angle towers. The SJ2-18 deviation angle tower made of weather-resistant cold-formed steel passed the 100% design load test under 8 working conditions. The shear failure of the connecting bolts between the SJ2-18 leg and the SJ2-18 foot occurred when the load reached 140%. The test results showed that the structure design of the SJ2-18 deviation angle tower was reasonable, with safe and reliable strength which could meet the requirements of DL/T 5154-2012. The research results could provide an experimental basis for the application of weather-resistant cold-formed steel deviation angle towers, and provide technical support for the promotion of weather-resistant cold-formed steel deviation angle towers.
- deviation angle tower /
- full-scale test /
- weathering and cold-formed steel /
- displacement /
- strain

HTML全文

参考文献(12)

[1]	陈城,许海源,王晨,等.500 kV输电塔线体系强风荷载倒塌分析[J].工业建筑,2019,49(12):36-41.
[2]	王凌旭,姚瑶,张有佳,等.不同覆冰状态下输电塔线体系脱冰及断线受力分析[J].工业建筑,2019,49(12):7-12.
[3]	TIAN L,FU Z Y,PAN H Y,et al.Experimental and numerical study on the collapse failure of long-span transmission tower-line systems subjected to extremely severe earthquakes[J].Earthquake and Structures,2019,16(5):513-522.
[4]	YANG F L,HAN J K,YANG J B,et al.Study on the application of weathering and cold-formed steel in transmission tower[C]//2009 Asia-Pacific Power and Energy Engineering Conference.2019:1-4.
[5]	杨风利,韩军科,杨靖波,等.输电铁塔用耐候钢节点耐腐蚀性能试验研究[J].电力建设,2008(9):23-28.
[6]	李正,冯卫民,赵金飞,等.耐候冷弯型钢在220 kV输电线路中的应用[J].电力建设,2010,31(7):101-104.
[7]	韩军科,杨风利,赵金飞,等.耐候冷弯型钢输电铁塔真型试验研究[J].工业建筑,2016,46(8):1-6.
[8]	YAO Y,WANG L X,ZHANG Y J.Stability and reinforcement analysis of weathering steel high voltage transmission tower[C]//IOP.Materials Science and Engineering.2019:1-8.
[9]	中华人民共和国住房和城乡建设部.110 kV-750 kV架空输电线路设计规范:GB 50545-2010[S].北京:中国计划出版社,2010.
[10]	中华人民共和国国家能源局.架空输电线路杆塔结构设计技术规定:DL/T 5154-2012[S].北京:中国计划出版社,2012.
[11]	中华人民共和国住房和城乡建设部.钢结构设计标准:GB 50017-2017[S].北京:中国建筑工业出版社,2018.
[12]	中华人民共和国建设部.冷弯薄壁型钢结构技术规范:GB 50018-2002[S].北京:中国计划出版社,2002.