EXPERIMENTAL STUDY OF WIND UPLIFT RESISTANCE ON METAL ROOF PANELS WITH STANDING SEAM SYSTEMS AT CHANGBEI AIRPORT
-
摘要: 近年来,轻便、大跨、强度高、防水性能好的直立锁边金属屋面系统越来越多地应用于机场、火车站和体育馆,但由于缺乏相应设计和施工标准,其抗风承载力不足的弊端也逐渐体现出来。以昌北机场T2航站楼金属屋面修复加固工程为研究背景,通过足尺试验对直立锁边金属屋面板进行抗风揭性能试验和评价。通过分析不同加固模式下的金属屋面板抗风揭破坏形态和承载力变化规律,确定直立锁边金属屋面系统的合理加固措施。试验结果表明,采用夹具进行加固可以有效地提高HXY-400型直立锁边金属屋面板的抗风揭承载力,其抗风揭承载力较未设夹具的屋面板抗风揭承载力提升4.18倍;檩条间距、檩条连接件抗剪承载力及檩条自身抗弯能力对于直立锁边金属屋面板的抗风揭承载力有着直接影响。Abstract: The standing seam metal roof system has the advantages of light weight, large spans, high strength and good waterproof performances. Therefore, it was increasingly used in airports, train stations and stadiums. However, due to the lack of the corresponding design and construction specifications, the disadvantage of the insufficient wind uplift resistance was gradually reflected. Taking the repair and reinforcement project of metal roofs for terminal T2 at Changbei Airport as the research background, the wind uplift resistance of metal roof panels with standing seam systems was tested and evaluated by full-scale tests. The reasonable reinforcement measures of the metal roof with standing seam systems were determined by analyzing failure modes of wind uplift and variation rules of wind uplift resistance for the metal roof panels with standing seam systems in different reinforcement modes. The test results showed that the clamps could effectively improve the wind uplift resistance of HXY-400 standing seam metal roof panels, and its wind uplift resistence was 4.18 times higher than that of the roof panels without clamps. In addition, purlin spacing also had a direct impact on the wind uplift resistance of standing seam metal roof panels.
-
Key words:
- metal roofing system /
- wind uplift resistance /
- standing seam /
- clamp
-
于敬海,李路川,盖力,等. 直立锁边金属屋面系统抗风承载力节点试验研究[J]. 建筑结构, 2015, 45(17):83-86. 孙成疆. 直立锁缝金属屋面系统在模拟极端暴风工况下抗风揭能力测试和分析[J]. 建筑结构, 2011, 41(增刊1):1438-1442. 叶志雄,邱剑. 直立锁边金属屋面对檩条侧向稳定的影响分析[J]. 钢结构, 2012, 27(11):20-22. FARQUHAR S, SURRY D, KOPP G A. Wind Tunnel and Uniform Pressure Tests of a Standing Seam Metal Roof Model[J]. Journal of Structural Engineering, 2005, 131(4):650-659. 王海涛,王静峰. 大跨度空间结构金属屋面板抗风揭性能试验研究[J]. 合肥工业大学学报(自然科学版), 2016, 39(1):115-121. 宋云浩,杨丽曼,王乾锁,等. 金属屋面板风吸力下变形特性研究[J]. 建筑结构, 2015, 45(17):87-91. 李明,殷小珠,张伟,等. 直立锁边屋面抗风性能有限元分析[J]. 钢结构, 2017, 32(8):72-76. 王宏斌,贾占坤,冯绍攀,等. 直立锁边铝镁锰板屋面系统抗风揭试验研究[J]. 工业建筑, 2018, 48(9):176-180. 陈辉. 直立锁边金属屋面的抗风构造性能试验研究[J]. 钢结构, 2018, 33(8):20-23,78. 中华人民共和国建设部.冷弯薄壁型钢结构技术规范:GB 50018-2002[S].北京:中国计划出版社,2002. 中华人民共和国住房和城乡建设部.门式刚架轻型房屋钢结构技术规程:GB 51022-2015[S].北京:中国计划出版社,2015. 中华人民共和国建设部.铝合金结构设计规范:GB 50429-2007[S].北京:中国计划出版社,2008.
点击查看大图
计量
- 文章访问数: 108
- HTML全文浏览量: 15
- PDF下载量: 5
- 被引次数: 0