煤矸石烧结复合保温砌块力学性能试验研究

王安民; 于秋波; 孙嘉琪; 秦孔源; 曾勋; 段敬民

doi:10.13204/j.gyjzG19090505

煤矸石烧结复合保温砌块力学性能试验研究

doi: 10.13204/j.gyjzG19090505

王安民¹,
于秋波^2,4, ,,
孙嘉琪³,
秦孔源⁴,
曾勋⁴,
段敬民⁵

1. 三门峡市自然资源和规划局, 河南三门峡 472000;
2. 郑州大学综合设计研究院有限公司, 郑州 450002;
3. 郑州工业应用技术学院建筑工程学院, 郑州 451150;
4. 郑州大学土木工程学院, 郑州 450000;
5. 河南工程学院, 郑州 451191

基金项目:

2017年河南省墙改基金（第二批）；河南省高等学校重点科研项目（20A560008）。

详细信息

作者简介:
王安民,男,1973年出生,高级工程师。

通讯作者:
于秋波,博士,chinayqb@126.com。

计量
- 文章访问数: 96
- HTML全文浏览量: 11
- PDF下载量: 1
- 被引次数: 0
出版历程
- 收稿日期: 2019-09-05
- 网络出版日期: 2021-07-17

EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF COAL GANGUE SINTERED COMPOSITE INSULATION BLOCKS

1. Sanmenxia Natural Resources and Planning Bureau, Sanmenxia 472000, China;
2. Muti-Functional Design Research Academy of Zhengzhou University Co., Ltd., Zhengzhou 450002, China;
3. School of Architecture and Engineering, Zhengzhou University of Industrial Technology, Zhengzhou 451150, China;
4. School of Civil Engineering, Zhengzhou University, Zhengzhou 450000, China;
5. Henan University of Engineering, Zhengzhou 451191, China

摘要

摘要: 煤矸石烧结复合保温砌块是集围护和保温于一体的一种新型墙体材料。为了掌握这种材料的力学性能，开展了煤矸石烧结复合保温砌块的力学性能进行试验研究，分析三种不同受压状态下砌体的抗压强度和抗折强度。研究表明：复合保温砌块的不同受压面的抗压强度存在较大差异，表现为承载面受压时最大，榫受压时面最小；复合保温砌块的抗折强度受自身裂缝的影响，折压比分散性较大；复合保温砌块的抗压性能符合GB/T 29060—2012《复合保温砖和复合保温砌块》和GB 50574—2010《墙体材料应用统一技术规范》中对砌块强度等级的要求。
- 煤矸石 /
- 复合保温砌块 /
- 抗压强度 /
- 抗折强度 /
- 折压比 /
- 强度特征
Abstract: Coal gangue sintered composite insulation blocks are new type of wall materials,which integrated the building enclosure and heat preservation. To grasp the mechanical properties of the blocks, tests were conducted, and the compressive strength and flexural strength on three different compression surfaces-the bearing surface, the front and surface of the joint tongue and groove were analyzed. The results showed that the compressive strength on different compression surfaces of composite insulation blocks was different obviously, the strength was the largest for the bearing surface, and the strength was the smallest for the surface of the joint tongue and groove. The flexural strength of composite insulation blocks was affected by its own cracks, and the ratios of bending-compressive strength were more dispersive. The compressive performances of the composite insulation blocks could meet the requirements for the strength grade of the blocks in the bricks & blocks composited insulation materials(GB/T 29060-2012) and the uniform technical code for wall materials used in buildings(GB 50574-2010).
- coalgangue /
- composite insulation block /
- compressive strength /
- flexural strength /
- ratio of bending-compressive strength /
- strength characteristics