钢管高性能混凝土压弯构件的静力性能(Ⅰ):试验研究及有限元模拟

尹晓东; 李庆刚; 王庆利

doi:10.13204/j.gyjz201303005

钢管高性能混凝土压弯构件的静力性能(Ⅰ):试验研究及有限元模拟

doi: 10.13204/j.gyjz201303005

1.
1. 辽宁金山钢构彩板工程有限公司,辽宁鞍山114100;
2.
2. 辽宁省建筑设计研究院,沈阳110005;
3.
3. 沈阳建筑大学土木工程学院,沈阳110168

基金项目:

辽宁省工程建设地方标准编制计划项目(200708)

详细信息

作者简介:
尹晓东,男,1969年出生,高级工程师. 电子信箱:ceqlwang@sjzu.edu.cn

中图分类号: TU398.9
计量
- 文章访问数: 111
- HTML全文浏览量: 12
- PDF下载量: 34
- 被引次数: 0
出版历程
- 收稿日期: 2012-10-30
- 刊出日期: 2013-03-20

STATIC PERFORMANCE OF THE HIGH-PERFORMANCE CONCRETE FILLED STEEL TUBULAR BEAM-COLUMN(Ⅰ): EXPERIMENTAL STUDY AND FINITE ELEMENT SIMULATION

1.
1. Liaoning Jinshan Steel Structure Painting Board Engineering Co.Ltd,Anshan 114100,China;
2.
2. Liaoning Provincial Building Design and Research Institute,Shenyang 110005,China;
3.
3. College of Civil Engineering,Shenyang Jianzhu University,Shenyang 110168,China

摘要

摘要: 为给辽宁省地方标准的编制提供依据对钢管高性能混凝土压弯构件的静力性能展开研究。通过对24个试件(内填自密实混凝土的立方试块抗压强度标准值为96MPa)的静力试验,发现钢管高性能混凝土压弯构件的轴力-挠度曲线可以分为弹性阶段、弹塑性阶段和下降段。试件挠曲线接近正弦半波曲线,钢管纵向应变基本符合平截面假定,环向受压的钢管对混凝土没有约束力。应用有限元法模拟试件的轴力-挠度曲线和变形模态,模拟结果与试验结果吻合良好。总体而言,钢管高性能混凝土压弯构件与普通钢管混凝土压弯构件在静力性能方面没有本质区别。
- 钢管混凝土 /
- 高性能混凝土 /
- 压弯构件 /
- 静力性能 /
- 试验研究 /
- 有限元模拟
Abstract: The static performance of the high-performance concrete filled steel tubular beam-columns were investigated in order to provide foundation for drawing the relative code of Liaoning Province.On the basis of experimental study on 18 specimens(the cubic compressive strength of the in-filled self-consolidating concrete was 96 MPa),it was found that the axial load-deflection curves could be divided into elastic,elasto-plastic and softening stages.The deflection curve was close to sine curve,distribution of longitudinal strain of the steel tube obeyed the plane section assumption,also,the transversely compressed steel tube had no confinement force to the concrete.The axial load-deflection curves and the deformed models were simulated by using FEM and the calculated results checked well with those of tests.In general,there are no essential differences between high-performance concrete filled steel tubular beam-column and normal concrete filled steel tubular beam-column in aspect of static performance.
- concrete filled steel tube /
- high-performance concrete /
- beam-column /
- static performance /
- experimental study /
- finite element simulation

HTML全文

参考文献(14)

[2] ABAQUS Theory Manual,Version 6.4[M]. Pawtucket (RI,USA): Hibbit,Karlsson and Sorensen,2002.

ABAQUS Explicit User Manual,Version 6.4[M]. Pawtucket(RI,USA): Hibbit,Karlsson and Sorensen,2002.

[3] 陶忠,于清.新型组合结构柱试验、理论与方法[M].北京:科学出版社,2006.

[4] 韩林海.钢管混凝土结构理论与实践[M].2版.北京:科学出版社,2007.

[5] 沈聚敏,王传志,江见鲸.钢筋混凝土有限元与板壳极限分析[M].北京:清华大学出版社,1993.

[6] 刘威.钢管混凝土局部受压时的工作机理研究[D].福州:福州大学,2005.

[7] Han L H,Tao Z,Zhao X L. Tests and Mechanics Model forConcrete-Filled SHS Stub Columns,Columns and Beam-Columns[J]. Structural Engineering and Mechanics,2001,1(1):1－27.

[8] Han L H,Yao G H,Zhao X L. Behavior and Calculation onConcrete-Filled Steel CHS (Circular Hollow Section) BeamColumns[J]. Steel and Composite Structures,2004,4(3):169－188.

[4] 陶忠,于清.新型组合结构柱试验、理论与方法[M].北京:科学出版社,2006.

[5] 沈聚敏,王传志,江见鲸.钢筋混凝土有限元与板壳极限分析[M].北京:清华大学出版社,1993.

[6] 刘威.钢管混凝土局部受压时的工作机理研究[D].福州:福州大学,2005.

[7] Han L H. Flexural Behaviour of Concrete-Filled Steel Tubes[J].Journal of Constructional Steel Research,2004,60(2):313－337.

[8] Han L H,Tao Z,Zhao X L. Tests and Mechanics Model forConcrete-Filled SHS Stub Columns,Columns and Beam-Columns[J]. Structural Engineering and Mechanics,2001,1(1):1－27.

[9] Han L H,Yao G H,Zhao X L. Behavior and Calculation onConcrete-Filled Steel CHS (Circular Hollow Section) BeamColumns[J]. Steel and Composite Structures,2004,4(3):169－188.

施引文献

资源附件(0)

访问统计