竖向加劲钢板剪力墙门槛刚度研究

赵伟; 周观根; 吴冲; 赵剑丽

doi:10.13204/j.gyjz201301023

竖向加劲钢板剪力墙门槛刚度研究

doi: 10.13204/j.gyjz201301023

赵伟^1,2,3,
周观根²,
吴冲¹,
赵剑丽³

1.
1. 同济大学土木工程学院,上海200092;
2.
2. 浙江东南网架股份有限公司,杭州311209;
3.
3. 浙江交通职业技术学院,杭州311112

基金项目:

住房与城乡建设部课题(2012-K2-19);浙江省教育厅课题(Y201225629)资助项目

详细信息

作者简介:
赵伟,男,1978年出生,博士,副教授. 电子信箱:billy123er@163.com

中图分类号: TU391
计量
- 文章访问数: 107
- HTML全文浏览量: 5
- PDF下载量: 88
- 被引次数: 0
出版历程
- 收稿日期: 2012-08-20
- 刊出日期: 2013-01-20

ELASTIC BUCKLING PROPERTY OF STEEL PLATE SHEAR WALL WITH VERTICAL STIFFENERS

1.
1. College of Civil Engineering,Tongji University,Shanghai 200092,China;
2.
2. Zhejiang Southeast Space Frame Co.Ltd,Hangzhou 311209,China;
3.
3. Zhejiang Technical Institute of Communications,Hangzhou 311112,China

摘要

摘要: 为研究设置竖向加劲肋的钢板剪力墙的弹性屈曲性能,采用有限元法对竖向加劲钢板剪力墙弹性屈曲性能进行研究,分析加劲肋的刚度、加劲数量和钢板高宽比等因素的影响。研究表明:设置竖向加劲能有效提高钢板墙剪切临界应力,钢板高宽比、加劲肋数目和加劲肋抗弯刚度均对钢板剪力墙屈曲系数有较大影响。提出加劲肋门槛刚度的判定标准和计算公式,该判定标准考虑了加劲肋扭转刚度的影响。与有限元结果的比较表明,具有较好的精度,且明显优于文献结果。
- 钢板剪力墙 /
- 竖向加劲肋 /
- 门槛刚度 /
- 弹性屈曲系数
Abstract: To study the elastic-buckling behaviors of steel plate wall with longitudinally stiffened only,the present design formulas and regulations for the design of stiffeners in steel shear walls were compared.And elastic-buckling behaviors of steel plate wall with longitudinally stiffened only were analyzed in detail with 3 D finite element methods(FEM).The effects of stiffener stiffness,stiffener number and aspect ratio of steel plate were analyzed.The research results showed that the longitudinal stiffener could increase the critical stress of steel plate wall efficiency,and the elastic shear buckling coefficient of stiffened steel plate wall was affected largely by the aspect ratio of steel plate,stiffener number and the bending stiffness of stiffener.The determination criterion of threshold stiffness and formula for stiffener were proposed.The torsional stiffness of stiffener was considered in the criterion.At last,the formula of elastic buckling coefficient for steel plate wall with longitudinally stiffened only was derived.Comparison with the numerical results showed that the accuracy of the formula was good and was superior than that of formulas in literature.
- steel plate shear wall /
- longitudinal stiffener /
- threshold stiffness /
- elastic buckling coefficient

HTML全文

参考文献(9)

JGJ 9998高层民用建筑钢结构技术规程[S].

[2] 童根树.钢结构设计方法[M].北京:中国建筑工业出版社,2007.

[3] Kulak G L,Kennedy. D J L,Robert G D. Steel Plate ShearWalls: An Overview[J]. Engineering Journal,2001,38(1):50-62.

[4] Alinia M M,Dastfan M. Behaviour of Thin Steel Plate Shear WallsRegarding Frame Members[J]. Journal of Constructional SteelResearch,2006,62(7):730-738.

[5] Alinia M M,Dastfan M. Cyclic Behaviour Deformability andRigidity of Stiffened Steel Shear Panels [J]. Journal ofConstruction Steel Research,2007,63(4):554-563.

[6] 郭彦林,陈国栋,缪文武.加劲钢板剪力墙弹性抗剪屈曲性能研究[J].工程力学,2006,23(2):84-91.

[7] 赵伟,杨强跃,童根树.钢板剪力墙加劲刚度及弹性临界应力研究[J].工程力学,2010(6):15-23.

[8] GB 500172003钢结构设计规范[S].

[9] Yoo C H,Lee S C. Mechanics of Web Panel PostbucklingBehavior in Shear [J]. Journal of Structural Engineering,2006,132(10):1580-1589.

施引文献

资源附件(0)

访问统计