考虑圣维南翘曲变形的初始扭转薄壁梁单元刚度矩阵

陈昌宏; 黄莺; 单建

doi:10.13204/j.gyjz201204013

考虑圣维南翘曲变形的初始扭转薄壁梁单元刚度矩阵

doi: 10.13204/j.gyjz201204013

1.
1. 西北工业大学力学与土木建筑学院西安 710129;
2.
2. 西安建筑科技大学土木工程学院西安 710129;
3.
3. 东南大学土木工程学院南京 210096

基金项目:

国家自然科学基金项目(50678036);西北工业大学基础研究基金

详细信息

作者简介:
陈昌宏，男，1980年出生，博士，讲师。

中图分类号: TU323.3
计量
- 文章访问数: 198
- HTML全文浏览量: 10
- PDF下载量: 122
- 被引次数: 0
出版历程
- 收稿日期: 2011-11-23
- 刊出日期: 2012-04-20

THE PRE- TWISTED THIN- WALLED BEAM ELEMENT STIFFNESS MATRIX CONSIDERING THE SAINT- VENANT WARPING DEFORMATION

1.
1. Institute of Mechanics and Civil Engineering,Northwestern Polytechnical University,Xi'an 710129,China;
2.
2. College of Civil Engineering,Xi'an University of Architecture and Technology,Xi'an 710055,China;
3.
3. College of Civil Engineering,Southeast University,Nanjing 210096,China

摘要

摘要: 基于传统薄壁直梁力学模型,对初始扭转薄壁梁有限元数值模型进行系统的分析与研究。首先基于初始扭转梁的几何变形微分关系,导出初始扭转薄壁梁圣维南翘曲应变。根据传统薄壁直梁有限元力学模型,考虑初始扭转梁圣维南翘曲变形,建立其有限元单元刚度矩阵。最后,通过椭圆截面初始扭转梁算例,并与ANSYS三维实体有限元分析结果进行对比分析,表明建立的考虑圣维南翘曲变形的初始扭转薄壁梁单元刚度矩阵具有良好的精度。
- 初始扭转 /
- 薄壁梁 /
- 圣维南 /
- 翘曲变形 /
- 刚度矩阵 /
- ANSYS
Abstract: Based on the traditional mechanical model of thin-walled straight beam,it is conducted a systematic analysis and research on the pre-twisted thin-walled beam finite element numerical model. Firstly,based on the geometric deformation differential relationship,it is deduced the pre-twisted thin-walled beam Saint-Venant warping strain. According to traditional thin-walled straight beam finite element mechanical model,it is also established its finite element stiffness matrix considering the Saint-Venant warping deformations. Finally,by calculating the pre- twisted elliptical section beam example,and contrasting three-dimensional solid finite element using ANSYS,the comparative analysis results show that pre-twisted thin-walled beam element stiffness matrix considering Saint-Venant warping deformation has a good accuracy.
- pre-twisted /
- thin-walled beam /
- Saint-Venant /
- warping deformation /
- stiffness matrix /
- ANSYS

HTML全文

参考文献(10)

Shadnam M R，Abbasnia R. Stability of Pretwisted Beams in CrossBracings[J]. Applied Mechanics and Technical Physics，2002，43(2): 328-335.

[2] 陈昌宏，单建，黄莺. 初始扭转轴压杆弹性弯扭屈曲性能研究[J]. 工程力学，2009，26(6):166-171.

[3] 包世华，周坚. 薄壁杆件结构力学[M]. 北京:中国建筑工业出版社，1991:417-427.

[4] 吴家龙. 弹性力学[M]. 上海:同济大学出版社，1993:40-42.

[5] 杜庆华. 工程力学手册[M]. 北京:高等教育出版社，1994:942-949.

[6] 王勖成，邵敏. 有限单元法基本原理和数值方法[M]. 北京:清华大学出版社，1997:280-292.

[7] Petrov E，Geradin M. Finite Element Theory for Curved andTwisted Beams Based on Exact Solutions for Three DimensionalSolids [J]. Computer Methods in Applied Mechanics andEngineering，1998 (165): 43-127.

[8] Zupan D，Saje M. OnA proposed Standard Set of Problems to Test Finite Element Accuracy: the Twisted Beam [J]. Finite Elements in Analysis and Design，2004(40):1445-1451.

[9] Yardimoglu B，Yildirim T. Finite Element Model for Vibration Analysis of Pre-Twisted Timoshenko Beam [J]. Journal of Soundand Vibration，2004，273: 741-754.

[10] ANSYS Inc. ANSYS APDL Programmer's Guide Release 7. 0[M]. 1999.

施引文献

资源附件(0)

访问统计