Q345与Q460结构钢材单调和循环加载性能比较

戴国欣; 王飞; 施刚; 王元清; 石永久

doi:10.13204/j.gyjz201201003

Q345与Q460结构钢材单调和循环加载性能比较

doi: 10.13204/j.gyjz201201003

戴国欣^1,2,
王飞^1,2,
施刚³,
王元清³,
石永久³

1.
1. 重庆大学土木工程学院,重庆 400045;
2.
2. 山地城镇建设与新技术教育部重点实验室(重庆大学),重庆 400045;
3.
3. 土木工程安全与耐久教育部重点实验室,清华大学土木工程系,北京 100084

基金项目:

国家自然科学基金重点项目(51038006)

详细信息

作者简介:
戴国欣，男，1955年出生，博士，教授，博士生导师。E-mail:dgx1018@126.com

计量
- 文章访问数: 251
- HTML全文浏览量: 9
- PDF下载量: 362
- 被引次数: 0
出版历程
- 收稿日期: 2011-06-20
- 刊出日期: 2012-01-20

COMPARISON OF MONOTONIC AND CYCLIC PERFORMANCES OF STRUCTURAL STEEL Q345 AND Q460

1.
1. School of Civil Engineering,Chongqing University,Chongqing 400045,China;
2.
2. Key Laboratory of New Technology for Construction of Cities in Mountain Area(Chongqing University),Ministry of Education,Chongqing 400045,China;
3.
3. Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry,Department of Civil Engineering,Tsinghua University,Beijing 100084,China

摘要

摘要: 因循环硬化、软化和包辛格效应等的影响,钢材在循环加载下的力学性能与单调加载下的力学性能会有很大差异。借助于对Q345和Q460两种强度等级钢材的单调和循环加载试验,分别从单调加载性能、循环加载现象、循环加载力学性能以及循环本构模拟等几个方面分析它们力学性能差异。分析结果表明,两种钢材单调加载下的延性都比较好,且Q460钢材的延性要优于Q345的。两种钢材循环加载时应力-应变曲线具有循环硬化、循环软化和包辛格效应等现象;循环作用使得两种钢材的硬化作用提前,Q345钢材的循环硬化现象更明显;Q460钢材循环荷载下的滞回耗能能力并不比Q345钢材差,同时循环荷载下钢材产生累积损伤。混合强化模型能较好地模拟两种钢材的循环拉压曲线,为进一步研究此类钢材结构抗震性能提供较为准确的本构模型。
- 高强度钢材 /
- 单调加载 /
- 循环加载 /
- 延性 /
- 滞回性能
Abstract: The mechanical properties of steel under monotonic loading and cyclic loading are quite different,because of cyclic hardening,cyclic softening and bauschinger effect.Based on the monotonic and cyclic loading experiment of structural steel Q345 and Q460,the comparison of monotonic performance,cyclic loading phenomenon,cyclic performance and cyclic constitutive model were analyzed.The results showed that:the ductility was good under monotonic loading and Q460 was better.The stress-strain curves possed of the phenomenon of cyclic hardening,cyclic softening,and Bauschinger effect.The hardening was advanced under cyclic loading and Q345 was remarkable.The energy dissipation capacity of Q460 was not lower than Q345,and steel occured cumulative damage under cyclic loading.The mixed hardening model could well simulate the cyclic tension-compression curves,which might provide cyclic constitutive model accurately of Q345 and Q460 to study the seismic behavior of steel structures.
- high strength steel /
- monotonic loading /
- cyclic loading /
- ducility /
- hysteretic behavior

HTML全文

参考文献(8)

董永涛,张耀春. 建筑用钢循环塑性本构模型[J].哈尔滨建筑大学学报,1993,(05):106-112.

GB/T1591-2008低合金高强度结构钢[S].

王飞,施刚,戴国欣. 屈强比对钢框架抗震性能影响研究进展[J].建筑结构学报,2010,(增刊):18-22.

Langenberg P. Relation Between Design Safety and fy/fu Ratio in Application of Welded High Strength Structural Steel[A].Safety and fy/fu Ratio.Beljing,2008.28-46.

陈绍蕃. 钢结构设计原理[M].北京:北京科学技术出版社,2005.

Ban H Y,Shi G,Shi Y J. Research Progress on the Mechanical Property of High Strength Structural Steels[J].Current Advances in Materials and Processes,2011.640-641.7 JGJ10196建筑抗震试验方法规程[S].

陈惠发. 土木工程材料的本构方程[M].武汉:华中科技大学出版社,2001.

Nip K H,Gardner L,Davies C M. Extremely Low Cycle Fatigue Tests on Structural Carbon Steel and Stainless Steel[J].Journal of Constructional Steel Research,2010,(01):96-110.

施引文献

资源附件(0)

访问统计