圆形截面混凝土偏心受压构件正截面承载能力计算方法

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名

邮箱

手机号码

标题

留言内容

验证码

基金项目:

国家自然科学基金项目(50908102);江南大学环境与土木工程学院院长基金项目(yzjj1101)

CALCULATION ON FLEXURAL CAPACITY OF NORMAL SECTION OF RC CIRCULAR MEMBERS UNDER ECCENTRIC LOAD

1.
1. College of Environmental and Civil Engineering,Jiangnan University,Wuxi 214122,China;
2.
2. Wuxi Civil Architectural Design Institute Co.LTD,Wuxi 214072,China

摘要: 考虑圆形截面自身的特点以及截面受压区压应力的分布规律,采用数值积分的方法推导了截面受压区压应力合力作用点计算公式。在此基础上建立了新的正截面承载力计算方法。该方法计算精度较高,明显克服了规范公式在低轴压下结果偏于不安全,在高轴压下过于保守的不足。
- 混凝土圆柱 /
- 偏心受压构件 /
- 正截面承载力计算 /
- 数值分析
Abstract: It is found that the calculated flexural capacity from formula provided in the code is significantly larger than the numerical results and test results when the axial load ratio is low,and is much smaller when the ratio is high.In order to overcome this deficiency,a new method is proposed to calculate flexural capacity,in which the characteristic of circular section and the stress distribution of the section are considered.The calculated results agree well with numerical results.
- RC circular columns /
- eccentric compression members /
- flexural capacity of normal section /
- numerical analysis