侧边加劲两边连接钢板剪力墙滞回性能分析

李然; 郭兰慧; 张素梅

doi:10.13204/j.gyjz201107024

侧边加劲两边连接钢板剪力墙滞回性能分析

doi: 10.13204/j.gyjz201107024

1.
哈尔滨工业大学土木工程学院,哈尔滨150090

基金项目:

国家自然科学基金资助项目(504780295,0808053);十一五科技支撑项目(2006BAJ01B02)

详细信息

作者简介:
李然, 男, 1981年出生, 博士研究生. E－mail:liran.hit@gmail.com

中图分类号: TU392.4
计量
- 文章访问数: 73
- HTML全文浏览量: 3
- PDF下载量: 81
- 被引次数: 0
出版历程
- 收稿日期: 2011-03-20
- 刊出日期: 2011-07-20

HYSTERETIC ANALYSIS OF STRENGTHENED STEEL PLATE SHEAR WALL CONNECTED WITH FRAME BEAMS ONLY

1.
School of Civil Engineering,Harbin Institute of Technology,Harbin 150090,China

摘要

摘要: 两边连接钢板剪力墙侧边由于受压屈曲产生较大变形,削弱其承载力和耗能能力。在两侧边采取加劲措施可以增强两侧边的稳定性,并在一定程度上提高承载能力和耗能能力。采用ANSYS有限元软件对侧边理想加劲的两边连接钢板剪力墙进行滞回分析,研究在理想加劲情况下,加劲肋对两边连接钢板剪力墙受力模式、承载能力和耗能能力的影响。分析结果表明,理想加劲情况下,拉力带较易产生,也因此提高了承载能力和耗能能力。随高厚比增大,加劲肋的影响相对增大;而随跨高比增大,加劲肋的影响趋于减小。
- 钢板剪力墙 /
- 两边连接 /
- 侧边加劲 /
- 滞回性能
Abstract: When lateral load is applied on steel plate shear wall connected with frame beams,the buckling of plate corner appears,which causes the lost of bearing capacity and energy dissipation ability.Stiffeners connected on two free sides not only prevent corner plate from early buckling but also increase the bearing capacity and energy dissipation ability.Finite element software ANSYS is used to analyze the effect when the two free sides are well strengthened.The results show that the strengthened sides make the tension field easy to form and this leads to the increasing of aseismatic performance of steel plate shear wall with two-side connections.With the increase of height-to-thickness ratio,the effect of stiffeners increases;when span-to-height ratio increases,the effect of stiffeners decrease.
- steel plate shear wall /
- connected with frame beams /
- strengthened on edges /
- hysteretic behavior

HTML全文

参考文献(9)

[2] Xue M, Lu L W.Monotonic and Cyclic Behavior of Infilled Steel Shear Panels[C]//Proceedings of 17 th Czech and Slovak International Conference on Steel Structures and Bridges. Slovakia;1994.

Xue M, Lu L W.Interaction of Infilled Steel Shear Wall Panels with Surrounding Frame Members[C]//Proceedings of Structural Stability Research Council Annual Technical Session. Bethlehem;1994;339-354.

[3] Thorburn L J, Kulak G L, Montgomery C J.Analysis of Steel Plate Shear Wall, Structural Engineering Report No.107[R]. Edmonton; Department of Civil Engineering, University of Alberta,1983.

[4] Timler P A, Kulak G L.Experimental Study of Steel Plate Shear Walls, Structural Engineering Report No.114[R]. Edmonton; Department of Civil Engineering, University of Alberta,1983.

[5] Ma X B, Guo L H, Zhang S M, et al. Experimental Study on Steel Shear Walls and Composite Shear Walls with Two-Side Connections[C]//Proceedings of the 3 rd International Symposium on Innovative Civil ＆ Architectural Engineering. Seoul;2008;152-160.

[6] 缪友武.两侧开缝钢板剪力墙结构性能研究[D].北京;清华大学,2004.

[7] 徐嫚,王玉银,张素梅.两边连接钢板剪力墙抗剪静力性能研究[J].工业建筑,2009,39(3);107-111.

[8] 马欣伯,张素梅,郭兰慧.侧边加劲肋对两边连接钢板剪力墙弹性屈曲的影响[C]//庆祝刘锡良教授八十华诞暨第八届全国现代结构工程学术研讨会论文集.天津;2008;1171－1176.

[9] 马欣伯.两边连接钢板剪力墙及组合剪力墙抗震性能研究[D].哈尔滨;哈尔滨工业大学,2009.

施引文献

资源附件(0)

访问统计