附着升降脚手架同步升降控制方法研究

杨光祥

doi:10.13204/j.gyjz201101007

附着升降脚手架同步升降控制方法研究

doi: 10.13204/j.gyjz201101007

杨光祥

1.
重庆工商大学计算机与信息工程学院,重庆 400067

详细信息

作者简介:
杨光祥，男，1973年出生，博士，副教授。E－mail：ygxmonkey@126.com

中图分类号: TU731.2
计量
- 文章访问数: 61
- HTML全文浏览量: 5
- PDF下载量: 119
- 被引次数: 0
出版历程
- 收稿日期: 2010-06-07
- 刊出日期: 2011-01-20

A STUDY ON SYNCHRONOUS CONTROL OF ATTACHED SELF-LIFTING SCAFFOLDS

Yang Guangxiang

1.
School of Computer Science and Information Engineering,Chongqing Technology and Business University,Chongqing 400067,China

摘要

摘要: 附着升降脚手架广泛应用在高层建筑施工中，当其不同步升降时机位荷载将重新分配，可能使某段架体或某些机具超载，构成安全隐患。依据一种基于测量电动葫芦电机转数的同步控制方法，基于微动开关对电机的转速测量，间接计算脚手架升降的高度差，从而实现各个机位的同步运行。在此基础上利用AT89C52单片机开发出同步控制装置。经过试验和实际运行结果表明，能够达到附着升降脚手架同步升降的目的。
- 附着升降脚手架 /
- 同步 /
- AT89C52 /
- 转速
Abstract: Attached self-lifting scaffolds are widely used in construction of high buildings.Machine position load will re-distributed when attached lifting scaffolding are lifted asynchronously,some members or some machine parts will be overloaded and form incipient faults.A study on measuring the rotational speed of motor was introduced in this paper,which calculated the lifting length difference by detecting the rotational number of motor and then synchronous lifting and declining solution of different machine position were achieved.Based on the principle,the synchronous device was designed using AT89C52 micro chip computer.The operational result shows that attached self-lifting scaffolds can run synchronously with this device.
- attached self-lifting scaffolds /
- synchronous devices /
- AT89 C52 /
- rotation speed

HTML全文

参考文献(13)

GB 500112001建筑抗震设计规范[S].

[2] GB 500112010建筑抗震设计规范[S].

[3] 王亚勇, 戴国莹.建筑抗震设计规范算例[M].北京:中国建筑工业出版社, 2006.

[4] Gupta B, Kunnath S K.Adaptive Spectra-Based PushoverProcedure for Seismic Evaluation of Structures [J].EarthquakeSpectra, 2000, 16(2):367－391.

[5] Jan Tysh-Shang, Liu Ming Wei.An Upper-Bound PushoverAnalysis Procedure for Estimating the Seismic Demands of HighRise Building[J].Engineering Structures, 2004, 26:117－128.

[6] Chopra A K, Goel R.A Model Pushover Analysis Procedure forEstimating Seismic Demands for Building [J].EarthquakeEngineering and Structural Dynamics, 2002, 31(1):561－582.

[7] 侯爽, 欧进萍.结构pushover 分析的侧向力分布及高阶振型影响[J].地震工程与工程振动, 2004, 24(3):90－97.

[8] 卢文生, 吕西林.框架剪力墙结构模态静力非线性抗震分析方法研究[J].地震工程与工程振动, 2005, 25(1):58－66.

[9] Shibata A, Sozen M.Substitute Structure Method for SeismicDesign in RC[J].Journal of the Structure Divison, ASCE, 1976, 102(1):1－18.

[10] 刘有军, 周建民.基于位移的RC 框架结构抗震设计研究[J].结构工程师, 2003(3):1－6.

[11] 梁兴文, 黄雅捷.钢筋混凝土框架结构基于位移的抗震设计方法研究[J].土木工程学报, 2005, 38(9):53－60.

[12] Filiatrault A, Folz B.Performance-Based Seismic Deisgn of WoodFramed Building[J].Journal of Structural Engineering, 2002, 128(1):39－47.

[13] Miranda E, Garcia J G.Evaluation of Approximate Methods toEstimate Maximum Inelastic Displacement Demands [J].Earthquake Engineering and Structural Dynamics, 2002, 31:539－560.

施引文献

资源附件(0)

访问统计