登录
注册
E-alert
登录
注册
E-alert
DYNAMIC ANALYSIS OF FORMWORK SUPPORT SYSTEM BY FREELY FALLING SHOCKING
-
摘要: 国内外在对模板支撑系统的设计普遍采用静力学的方法，这是直接导致模板支撑系统坍塌事故的重要因素之一。为了更好地反映结构的真实工况，采用动力学替代静力学的观点来设计与分析。通过有限元的瞬态动力学方法，建立模板支撑系统的动力学模型，对自由落体冲击下的高大模板支撑系统的动态特性进行了模拟，得到了结构静动态位移和应力。与理论方法相比较，验证了自由落体冲击动力系数与下落高度的关系。Abstract: In China and even world-wide,the method of statics is often use statics point of view to design the formwork support system,which is one of the important factors that leads to collapse of high formwork construction.In order to reflect the real condition of the structure,it requires dynamics rather than statics to design and analyse.Through transient dynamics of the finite element,the mode of high formwork under freely falling shocking was simulated.The displacement and stress of static and dynamic were obtained.Compared with the theoretical method,it was verified the relationship between the coefficient of freely falling chocking and the falling height.
-
[2] 方燕.模板支架倒塌事故动力学分析探讨[J].山西建筑, 2007, 33(12):167－168. 熊辉莹, 谢宇岫, 周金根.关于模板扣件钢管支撑系统诱发荷载讨论[J].建筑施工, 2004, 26(1):56－57. [3] 陈海浪, 王欢, 张增峰, 等.基于ANSYS 的扣件式钢管高支撑架计算分析[J].浙江建筑, 2009, 26(3):38－43. [4] 周继忠, 蔡雪峰, 张士元.扣件钢管脚手架高大模板支撑安全事故分析与控制[J].工业建筑, 2008, 38(1):17－20. [5] 敖鸿斐, 李国强.双排扣件式钢管脚手架的极限稳定承载力研究[J].力学季刊, 2004, 6(2):213－218. [6] 王勇.超高扣件式钢管模板支架的安全性分析[D].北京:北京交通大学, 2007. [7] Weesner L B, JonesH L.Experimental and Analytical Capacity ofFrame Scaffolding [J].Engineering Struetures, 2001, 23(6):592－599. [8] Peng Julin, Chen Kuanhung.Experimental and Analytical Studieson Steel Scaffolds Under Eccentric Loads[J].Constructional SteelResearch, 2009, 65(6):422－435. -
点击查看大图
计量
- 文章访问数: 124
- HTML全文浏览量: 9
- PDF下载量: 163
- 被引次数: 0
下载:
