EXPERIMENTAL STUDY ON BOND-ANCHORAGE PROPERTIES OF HRB HIGH-STRENGTH STEEL BARS IN CONCRETE AFTER HIGH TEMPERATURE
-
摘要: 对高温后45个HRB高强钢筋与混凝土粘结锚固试件进行拔出试验,研究高温后高强钢筋粘结锚固的特点和影响粘结锚固强度的主要因素。钢筋混凝土试件的受热温度分别为200,400,600℃,冷却方式为空气中自然冷却,加载方式为单向拉拔。试验考虑混凝土强度、锚筋屈服强度、配箍率的影响,分析各种参数对高温后高强钢筋粘结性能的影响规律,并指出高温后高强钢筋的粘结锚固机理和普通钢筋的粘结锚固机理大致相同。Abstract: Based on 45 HRB high-strength steel bar specimens pull-out tests after high temperature,it is studied that the bond-anchorage properties of high-strength steel bars and the main factors influencing the bond capacity between high-strength steel bars and concrete. During the experiments,the reinforced concrete specimens were heated at 200, 400 and 600 ℃,respectively,cooled in air and subjected to monotonic pull-out loading. The influencing regulations of some factors on the bond-anchorage properties of high-strength steel bars are investigated,such as concrete strength,yield strength of reinforcing bar,stirrup ratio. At the same time,the paper clarifies that the major bondanchorage mechanism of high-strength steel bars after high temperature is similar to that of the general reinforcement.
-
Key words:
- high temperature /
- HRB high-strength steel bar /
- bond-anchorage /
- bond strength
-
[2] 过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003:146-164. GB 5015292 混凝土结构试验方法标准[S]. [3] 徐有邻.变形钢筋- 混凝土粘结锚固性能的试验研究[D].北京:清华大学,1990. [4] 毛达岭.HRB500 钢筋粘结锚固性能的试验研究[D].郑州:郑州大学,2004. [5] 王希伟.高强钢筋高强混凝土粘结锚固性能的试验研究[D].泉州:华侨大学,2007. [6] 李千.超细晶粒钢筋粘结锚固性能的研究[D].郑州:郑州大学,2007. [7] 周新刚,吴江龙.高温后混凝土与钢筋黏结性能的试验研究[J].工业建筑,1995,25(5):37-40. [8] 袁广林,郭操,吕志涛.高温后钢筋混凝土黏结性能试验研究[J].河海大学学报,2006,34(3):290-294.
点击查看大图
计量
- 文章访问数: 78
- HTML全文浏览量: 7
- PDF下载量: 135
- 被引次数: 0