考虑双重界面滑移的钢套筒植筋系统受力机理有限元分析

舒睿彬; 张建荣; 张春

doi:10.13204/j.gyjz201001023

考虑双重界面滑移的钢套筒植筋系统受力机理有限元分析

doi: 10.13204/j.gyjz201001023

1.
1. 华东建筑设计研究院有限公司,上海200002;
2.
2. 同济大学,上海200092;
3.
3. 绍兴市公路管理处,浙江绍兴312000

详细信息

作者简介:
舒睿彬,男,1982年出生,硕士. E-mail:ruibinshu@ecadi.com

中图分类号: TU375
计量
- 文章访问数: 59
- HTML全文浏览量: 3
- PDF下载量: 55
- 被引次数: 0
出版历程
- 收稿日期: 2009-06-12
- 刊出日期: 2010-01-20

FE ANALYSIS ON LOAD TRANSFER MECHANISM OF BONDED REBARS WITH STEEL SLEEVE CONSIDERING SLIP OF TWO INTERFACES

1.
1. East China Architectural Design &Research Institute Co.Ltd,Shanghai 200002,China;
2.
2. Tongji University,Shanghai 200092,China;
3.
3. Shaoxing Highway Management Office,Shaoxing 312000,China

摘要

摘要: 为研究包含双重界面滑移的植筋系统受力机理,对钢套筒植筋系统进行考虑粘结滑移的非线性有限元分析。在钢套筒植筋系统中,由于钢筋和钢套筒均为钢材,材料性能类似,使得植筋胶与钢筋、植筋胶与钢套筒的粘结性能类似,因此胶筋界面和胶筒界面应有相类似的粘结滑移本构关系。利用钢套筒植筋试验研究得到包含胶筋和胶筒两个界面滑移的粘结滑移本构关系,采用均分方法得到钢套筒植筋系统的胶筋界面和胶筒界面独立分离的粘结滑移本构关系,在此基础上对钢套筒植筋系统进行考虑粘结滑移的ANSYS有限元分析。根据有限元分析结果,证明所建立的两个界面的粘结滑移本构关系合理。了解钢套筒植筋系统的粘结滑移受力机理,为进一步认识自由拉拔植筋系统的粘结滑移受力机理提供了基础。
- 植筋 /
- 粘结滑移 /
- 受力机理 /
- 有限元
Abstract: To study the load transfer mechanism of bonded rebars including slip of two interfaces,the bonded rebars system of steel sleeve was studied by nonlinear FE analysis method.In the bonded rebars system of steel sleeve,because the material of steel sleeve is similar to the one of the steel bar,the bond performance between adhesive and steel bar is similar to the one between adhesive and steel sleeve,so that the bond-slip constitutive relationships of steel-adhesive interface and adhesive-sleeve interface are similar.Therefore,according to the bond-slip constitutive relationship including slip of two interfaces which was formed by the experimental research of steel sleeve,the respective and separate bond-slip constitutive relationships of two interfaces were formed by average division.Then by using these two constitutive relationships,the bonded rebars system of steel sleeve was studied by the FE analysis based on the ANSYS program considering slip of two interfaces.According to the analysis result,the bond-slip constitutive relationships of two interfaces are reasonable,and the load transfer mechanism of the bonded rebars system of steel sleeve is understood,which is the fundamental work in the further cognition of the load transfer mechanism of the bonded rebars system.
- bonded rebars /
- bond-slip /
- load transfer mechanism /
- finite element analysis

HTML全文

参考文献(7)

张建荣,黄河军.植筋胶拉伸抗剪本构关系的研究[J].结构工程师,2006,22(3):72-75.

[2] 黄河军,张建荣,吴进,等.结构胶粘剂金属套筒粘结试验研究[J].莱阳农学院学报:自然科学版,2006,23(3),220-224.

[3] GB 503672006混凝土结构加固设计规范[S].

[4] JGJ 1452004混凝土结构后锚固技术规程[S].

[5] 刘慧林,刘有军.化学植筋技术原理及其实验研究[J].国外建材科技,2006,27(1):67-70.

[6] Michael McCay,Ronald ACook,Kailash Krishnamurthy. Pullout Simulation of Post-Installed Chemically Bonded Anchors[J].Journal of Structural Engineering,1996,122(9):1016-1024.

[7] Ronald A Cook. Behavior of Chemically Bonded Anchors[J].Journal of Structural Engineering,1993,119(9):2744-2762.

施引文献

资源附件(0)

访问统计