登录
注册
E-alert
登录
注册
E-alert
STUDY ON THE RELATIONS OF CHEMICAL COMPOSITION,MICROSTRUCTURE AND PROPERTIES OF FINE GRAIN RIBBED BAR
-
摘要: 建筑用螺纹钢筋在我国钢材产量中占有重要比例,国民经济的迅速发展对其产品质量和性能提出了更高的要求。对超快速冷却技术生产的HRBF400细晶螺纹钢筋的组织和力学性能进行分析和研究,结果表明:该技术可以明显提高钢筋的强度,而塑性指标下降较少;同时可以获得细小的铁素体和珠光体组织,各项指标满足国家标准的要求。Abstract: Ribbed bar for construction has an important ratio in the steel production of China,and a higher requirement of production quality has been put forward with the rapid development of economy.In this paper,the microstructure and mechanical properties have been studied and analyzed for HRBF400 fine grain ribbed bar produced with ultra fast cooling techniques,the results show that the strength of ribbed bar can be improved obviously with this technique and has a less degree of decrease in its plastic index.The fine ferrite and pearlite were obtained in the meantime and all kinds of properties can meet the request of national standard.
-
Key words:
- fine grain ribbed bar /
- microstructure mechanical properties /
-
陈扬.棒材轧后控冷技术的探讨[J].江苏冶金,1998(1):38-40. [2] 闻雷.大规格钢筋余热处理工艺及温度场有限元分析[D].沈阳:东北大学,1998. [3] 李光瀛,刘浏.现代建筑钢结构用钢的开发与展望[J].新材料产业,2004(11):55-57. [4] 徐洪庆,路清祥,刘纯.英标460 MPa级高强度钢筋的生产[J].轧钢,2004,21(4):24-26. [5] 邓保全,赵自义,范银平,等.铌微合金化HRB400钢筋控轧控冷工艺实践[J].轧钢,2004,121(16):45-47. [6] 田丽霞,程德朝,于爱民.钒微合金化HRB400Ⅲ级钢筋的开发及推广应用[J].河南冶金,2002,10(5):11-13. [7] 张伟,阎志华,鞠艳美.VN合金化对HRB400钢筋力学性能的影响[J].山东冶金,2004,26(5):P53-55. [8] 张树星,冯建航,曹振武.20MnSiV(N)新Ⅲ级螺纹钢筋的开发[J].炼钢,2002,18(3):10-14. [9] 黄肇信,王广顺,王秀波.HRB400小规格热轧带肋钢筋的试制与开发[J].轧钢,2001,18(5):25-29. -
点击查看大图
计量
- 文章访问数: 111
- HTML全文浏览量: 13
- PDF下载量: 35
- 被引次数: 0
下载:
