边缘约束构件配箍特征值对剪力墙轴压比限值影响的分析

白亮; 梁兴文

doi:10.13204/j.gyjz200904011

边缘约束构件配箍特征值对剪力墙轴压比限值影响的分析

doi: 10.13204/j.gyjz200904011

白亮,
梁兴文

1.
西安建筑科技大学结构工程与抗震教育部重点实验室,西安 710055

基金项目:

国家自然科学基金资助项目(05678146);高等学校博士学科点专项科研基金项目(20070703002)

计量
- 文章访问数: 106
- HTML全文浏览量: 6
- PDF下载量: 94
- 被引次数: 0
出版历程
- 收稿日期: 2008-10-07
- 刊出日期: 2009-04-20

INFLUENCE OF THE CHARACTERISTIC VALUE OF STIRRUP CONTENT IN BOUNDARY ELEMENTS ON ALLOWABLE AXIAL LOAD RATIO FOR CONCRETE STRUCTURAL WALLS

1.
Key Laboratory for Structural Engineering and Earthquake Resistance of China Education Ministry,Xi’an Univ.of Arch.&Tech.,Xi’an 710055,China

摘要

摘要: 轴压比是影响剪力墙抗震性能的主要因素，我国现行规范规定的剪力墙轴压比限值未考虑边缘约束构件配箍特征值、延性比需求等因素的影响。通过研究剪力墙的延性比、边缘约束构件配箍特征值等因素对剪力墙轴压比限值的影响，得到了三者之间的关系。研究结果表明，适当增加约束区约束钢筋的配筋率可以提高剪力墙的轴压比限值。给出了满足具体的延性需求、对应不同约束钢筋配箍特征值的剪力墙轴压比限值。
- 延性 /
- 剪力墙 /
- 配箍率 /
- 轴压比
Abstract: Axial load ratio is a main factor affecting the seismic performance of concrete structural walls.However,the influences of ductility demand and the characteristic value of stirrup content in boundary elements are not considered in the allowable axial load ratio specified by the current codes in China.The influence of the characteristic value of stirrup content _v on the displacement ductility ratio _ and allowable axial load ratio,n,for concrete structural walls is studied.It is obtained that the relationships among the ductility ratio,axial load ratio and the characteristic value of stirrup content.The results show that increasing the boundary confinement ratio of the walls can raise allowable axial load ratio.At last,allowable axial load ratio is proposed with various confinement ratios,which is satisfied for certain ductility demand.
- ductility /
- concrete structural walls /
- volumetric ratio of confinement steel /
- axial load ratio

HTML全文

参考文献(13)

[2] GB500112001建筑抗震设计规范[S];

GB500102002混凝土结构设计规范[S];

[3] JGJ 32002高层建筑混凝土结构设计规程[S];

[4] 吕文,钱稼茹,方鄂华.钢筋混凝土剪力墙延性的试验和计算[J].清华大学学报,1999(4):88-91;

[5] 方鄂华.底层加强剪力墙的抗震性能.建筑结构学报,1989,10(2):24-33;

[6] 钱稼茹,吕文,方鄂华.基于位移延性的剪力墙抗震设计.建筑结构学报,1999,20(3):42-49;

[7] 张展,周克荣.变高宽比高性能混凝土剪力墙抗震性能的试验研究[J].结构工程师,2004,21(2):62-68;

[8] 章红梅,吕西林.边缘约束构件对钢筋混凝土剪力墙抗震性能的影响[J].地震工程与工程振动,2007,27(1):92-99;

[9] 梁兴文,邓明科,张兴虎,等.高性能混凝土剪力墙性能设计理论的试验研究[J].建筑结构学报,2007,2(5):80-88;

[10] Honggun Park et al.Moment-Curvature Relation-Ship of Flexure-Dominated Walls with Partially Confined End-Zone[J].EngineeringStructures,2007,29:33-45;

[11] Priestiey MJ N,M.J.Kowalsky.Aspect of Drift and Ductility Capacityof Rectangular Cantilever Structural Walls[R].Bulletin of NewZealand Societyfor Earthquake Engineering.1998,31:73-85;

[12] 范立础.桥梁抗震[M].上海:同济大学出版社,1997:266-267;

[13] Pauiay T,Priesiey MJ N.Seismic Design of Reinforced Concrete andMasonry Buildings[M].NewYork:John WileySons,Inc,1992:86-88.

施引文献

资源附件(0)

访问统计