轻型围护门式刚架普通钢结构厂房的优化设计分析

班慧勇; 王元清; 石永久; 张勇

doi:10.13204/j.gyjz200903027

轻型围护门式刚架普通钢结构厂房的优化设计分析

doi: 10.13204/j.gyjz200903027

班慧勇^1,2,
王元清^1,2,
石永久^1,2,
张勇³

1.
1. 清华大学土木工程系,北京 10084;
2.
2. 清华大学结构工程与振动教育部重点实验室,北京 100084;
3.
3. 北京交通大学土木建筑学院,北京 100044

详细信息

作者简介:
班慧勇,男,1985年3月出生,博士研究生

计量
- 文章访问数: 97
- HTML全文浏览量: 7
- PDF下载量: 120
- 被引次数: 0
出版历程
- 收稿日期: 2008-10-20
- 刊出日期: 2009-03-20

OPTIMAL DESIGN ANALYSIS OF PORTAL FRAME OF ORDINARY STEEL STRUCTURE WORKSHOP WITH LIGHTWEIGHT ENCLOSURE

1.
1. Department of Civil Engineering,Beijing 100084,China;
2.
2. Key Laboratory of Structural Engineering and Vibration of China Education Ministry,Tsinghua University,Beijing 100084,China;
3.
3. School of Civil Engineering,Beijing Communication University,Beijing 100044,China

摘要

摘要: 随着轻型围护材料的广泛应用和一些钢结构厂房工程的实践,在普通钢结构厂房中,用实腹式门式刚架代替传统采用的格构式刚架结构成为可能,但现有设计方法只是单纯采用普钢规范和凭借工程经验。为优化这种设计方法,控制用钢量并保证设计的可靠性,通过对我国现行钢结构相关规范、规程的对比分析,结合工程经验,提出了轻型围护门式刚架普通钢结构厂房的优化设计方法。最后用实际工程案例验证了该方法的可行性和优势,为今后同类型的厂房设计提供了一定的设计依据。
- 门式刚架 /
- 普通钢结构 /
- 轻型围护 /
- 设计方法
Abstract: With the application of lightweight enclosure materials in the steel structure workshops, the solid??web type portal frame is used in metallurgical workshop, instead of the traditional latticed structure, but the current design method only bases on the code for design of steel structure and the experience. In order to control the steel consumption and ensure the safety, an optimal design method for the portal frame of ordinary steel structure workshop is proposed, according to the contrastive analysis on current related codes and the engineering experience. One project case shows the advantages of this method, and this method provides a basis for the project design of the same type.
- portal frame /
- ordinary steel structure /
- lightweight enclosure structure /
- design method