钢筋混凝土平板-T形柱结构的等效梁法计算模型研究

李光星; 蔡健; 杨春; 林凡

doi:10.13204/j.gyjz200706014

钢筋混凝土平板-T形柱结构的等效梁法计算模型研究

doi: 10.13204/j.gyjz200706014

1.
1 广州市设计院广州 510620;
2.
2 华南理工大学土木工程系广州 510640

详细信息

作者简介:
李光星男 1972年12月出生博士国家一级注册结构师 E-mail:liguanxing@gzdi.com

中图分类号: TU375.2
计量
- 文章访问数: 86
- HTML全文浏览量: 5
- PDF下载量: 52
- 被引次数: 0
出版历程
- 收稿日期: 2005-12-24
- 刊出日期: 2007-06-20

STUDY ON EQUIVALENT BEAM CALCULATING MODEL OF REINFORCED CONCRETE FLAT SLAB-T-COLUMN STRUCTURES

1.
1 Guangzhou Design Institute Guangzhou 510030;
2.
2 Department of Civil Engineering,South China University of Technology Guangzhou 510640

摘要

摘要: 为了解决现有的钢筋混凝土板柱结构计算模型存在的问题,运用ETABS分析程序对不同柱网尺寸、不同楼层总高度的典型的钢筋混凝土平板-T形柱结构采用等效梁方法进行简化建模分析,并将分析结果和运用ETABS分析程序的杆壳单元模拟的相应结构模型的分析结果进行比较,对这种简化方法进行了评价,并提出了能够反映在水平荷载和竖直荷载共同作用下板柱结构受力变形特征的计算模型。分析表明,现有等效梁方法能够反映板柱结构的受力变形特征,只是模拟结果不稳定且绝大部分结果偏刚;等效梁的宽度取值主要与所考察受力方向的结构跨度、结构层高和总高度有关。
- 钢筋混凝土平板 /
- T形柱 /
- 计算模型 /
- 等效梁
Abstract: In order to solve the problem existed in calculating model of reinforced concrete flat slab-column structures,the typical reinforced concrete flat slab-T-shaped column structures with a series of span sizes and story heights were modeled and analyzed by ETABS analysis program according to equivalent beam method.The analysis results were compared with the results of relevant models made by shaft-shell element in ETABS analysis program.The simplify method was evaluated,and the calculating model was put forward,which can fairly analogue the deformation features of flat slab-column structures loaded by horizontal and vertical loads.The analysis result shows that the current equivalent beam method can analogue the deformation features of flat slab-column structures,although the results are unstable and mainly more stiffness.The width of equivalent beam section is dependent on the parameters such as the span in the action direction and story height and total height of structures.
- reinforced concrete flat slab /
- T-column /
- calculating model /
- equivalent beam

HTML全文

参考文献(8)

[2] JGJ/T 92-93 无粘结预应力混凝土结构技术规程

朱聘儒.双向板无梁楼盖.北京:中国建筑工业出版社,1999

[3] 郑文忠,俞伟根,吕志涛.后张预应力混凝土平板-柱结构合理计算模式和方法的研究.工程力学,1995,12(3):39-54

[4] 吴强,程文禳.水平力作用下板柱结构等代梁计算宽度的研究.工业建筑,2004,34(3):77-79

[5] 李俊兰,吕西林,周德源.地震作用下板柱结构等代框架法计算模型的研究.建筑结构学报,1999,20(1):39-45

[6] Hwang S J,Moehle J P.Vertical and Lateral Load Tests of a Nine-Panel Flat-Plate Frame.ACI Structure Journal,2000,97(1):193-203

[7] Hwang S J,Moehle J P.Models for Laterally Loaded Slab-Column Frames.ACI Structure Journal,2000,97(2):345-352

[8] Banchik C A.Effective Beam Width Coefficients for Equivalent Frame Analysis of Flat-Plate Structures.ME Thesis,University of California at Berkeley,Calif.,1987:56

施引文献

资源附件(0)

访问统计