型钢混凝土柱承载能力主要规程计算方法比较

杨勇; 庄云; 郭子雄; 聂建国

doi:10.13204/j.gyjz200705021

型钢混凝土柱承载能力主要规程计算方法比较

doi: 10.13204/j.gyjz200705021

1.
1 华侨大学土木工程学院泉州 362021;
2.
2 清华大学土木工程博士后流动站北京 100084

基金项目:

中国博士后基金资助项目(2005037062);福建省自然科学基金资助项目(E054006);福建省青年科技人才创新项目(2005J032);国家自然科学基金资助项目(50478120)

详细信息

作者简介:
杨勇男 1976年11月出生博士后副教授

中图分类号: TU398.9
计量
- 文章访问数: 90
- HTML全文浏览量: 7
- PDF下载量: 204
- 被引次数: 0
出版历程
- 收稿日期: 2006-12-20
- 刊出日期: 2007-05-20

COMPARISONS ANALYSIS OF MAJOR DESIGN SPECIFICATIONS ON CALCULATING LOAD-BEARING CAPACITY OF STEEL REINFORCED CONCRETE (SRC) COLUMN

1.
1 College of Civil Engineering,Huaqiao University Quanzhou 362021;
2.
2 Postdoctoral Station of Civil Engineering,Tsinghua University Beijing 100084

摘要

摘要: 型钢混凝土(SRC)柱截面承载能力计算主要有基于钢筋混凝土柱承载能力计算模式、钢结构柱容许应力法和叠加原理的型钢混凝土柱计算方法。在简单介绍基于上述各种模式的ACI、AISC-LRFD、我国冶金行业标准(YB规程)采用的简单叠加法及冶金行业标准条文说明中建议的型钢混凝土柱截面承载能力四种主要计算方法基础上,通过算例比较,对四种典型计算模式的计算方法和计算步骤进行详细介绍。基于已有试验研究结果,对各种计算方法所得结果与试验结果及各计算模式进行比较分析。结果表明,四种计算模式中,AISC-LRFD计算SRC柱截面承载能力较为保守,ACI和冶金部行业标准计算方法所得结果与试验结果比较接近,并且计算也较方便。
- 型钢混凝土柱 /
- 偏心受压柱 /
- 截面承载能力 /
- 计算方法 /
- 计算算例 /
- 比较分析
Abstract: The calculation methods to calculate load-bearing capacity of steel reinforced concrete(SRC) column are mostly based on calculation of the bearing capacity of reinforced concrete column,the allowable stress law of steel column and the superposed method.Four typical calculation methods respectively based on the above patterns provided by ACI-318-02 specification,AISC-LRFD design code,and the Specification for SRC structure(YB 9082-97) of China are introduced.According to a calculation example of load-bearing capacity of SRC eccentrically compressed,calculation method and steps of the four routine calculations pattern are presented.Load-bearing capacities of a series of SRC columns specimens tested before in references are also calculated using the method of the above specifications and codes,and comparison analysis between calculated results and test results are also conducted.It is denoted that among the four typical methods,the AISC-LRFD calculation method provides very conservative calculation results,calculation methods of the ACI specification and YB 9082-97 specification provides results close to the test results.
- steel reinforced concrete(SRC) column /
- eccentrically compressed column /
- load-bearing capacity /
- calculation method /
- calculation example /
- comparison analysis

HTML全文

参考文献(10)

Buildings Code Requirements for Structural Concrete (ACI 318-02).Detroit (MI):American Concrete Institute (ACI),2002

[2] AISC.Load and Resistance Factor Design Specification for Structural Steelbuildings.Chicago:American Institute of Steel Construction (AISC),1993

[3] 日本建築学会.鉄骨鉄筋コンクリ一ト計算規準.同解説,2001

[4] YB 9082-97 钢骨混凝土结构设计规程

[5] El-Tawil S,Sanz-Picon C F,Deierlein G G.Evaluation of ACI 318 and AISC (LRFD) Strength Provisions for Composite Beam-Columns.Journal of Constructional Steel Research,1995,34:23-103

[6] El-Tawil S,Deierlein G G.Strength and Ductility of Concrete Encased Composite Columns.Journal of Structural Engineering,ASCE,1999,125 (9):1 009-1 019

[7] Weng C C,Yen S I.Comparisons of Concrete-Encased Composite Column Strength Provisions of ACI Code and AISC Specification.Engineering Structures,2002,24:59-72

[8] Viest I M,Colaco J P,Furlong R W,et al.Composite Construction Design for Buildings.New York:McGraw-Hill,1997

[9] Ricles J M,Paboojian S D.Seismic Performance of Steel-Encased Composite Columns.Journal of Structural Engineering,ASCE,1994,120 (8):94-2474

[10] Mirza S A,Lacroix E A.Comparative Strength Analyses of Concrete-Encased Steel Composite Columns.Journal of Structural Engineering,ASCE,2004,130 (12):53-1 941

施引文献

资源附件(0)

访问统计