椭圆形钢管混凝土构件纯弯力学性能分析
MECHANICAL BEHAVIOURS OF ELLIPTICAL CONCRETE-FILLED STEEL TUBULAR MEMBERS UNDER PURE BENDING
-
摘要: 利用有限元软件ABAQUS建立椭圆形钢管混凝土构件纯弯力学性能分析的有限元计算模型,并通过6个椭圆形钢管混凝土构件纯弯试验验证有限元计算模型的准确性。在此基础上对其受力全过程中钢管及混凝土应力分布情况进行分析,同时给出钢管与核心混凝土之间的相互作用,并对剪跨比、钢管强度、混凝土强度、短轴长和长轴长等参数对纯弯时构件极限承载力及荷载-位移曲线的影响进行比较。结果表明:椭圆形钢管混凝土构件在跨中发生倾向弯曲破坏,钢管屈服强度、混凝土强度、长轴长、短轴长及钢管壁厚等参数对其力学性能影响显著,剪跨比对其力学性能影响不明显。Abstract: A finite element analysis ( FEA) model for elliptical concrete-filled steel tubular member under pure bending is developed by the universal FEA software ABAQUS. The corresponding tests of 6 members under pure bending are conducted to verify the FEA model. It can be found that,in general,good agreement is obtained between the predicted and test results. The FEA model is then used to investigate the mechanism of such composite members further. The stress distribution of the steel tube and the concrete,and the interaction between the steel tube and the core concrete are analyzed. And then,the main parameters influencing the ultimate bearing capacity and the loaddeformation relationship curves under pure bending such as shear span ratio,steel tube strength,concrete strength, major axis length and minor axis length are investigated. The results show the typical failure modes of these members were the lateral overall bending at about mid-length,the yield strength of steel tube,the compressive strength of concrete,the major axis length,the minor axis length and the steel tube wall thickness have obvious effects on their mechanical behavior,while the shear span ratio has slight effect on their mechanical behavior.
期刊类型引用(3)
1. 杨艳敏,胡挺益,张滨麟,王勃,王小玉. 基于钢板连接的夹芯墙板-钢框架装配式体系抗震性能. 建筑科学与工程学报. 2020(03): 63-72 . 百度学术 2. 关宏洁,王群,田晶. 同高宽比弹塑性隔振建筑结构的抗震性能试验研究. 华南地震. 2019(02): 124-129 . 百度学术 3. 陶成云,虞夏深. 摩擦型耗能支撑钢框架结构抗侧力性能. 科学技术与工程. 2018(01): 315-320 . 百度学术 其他类型引用(1)
点击查看大图
计量
- 文章访问数: 152
- HTML全文浏览量: 25
- PDF下载量: 76
- 被引次数: 4